Shreedhar Bhat

Structure and Rheology of Cationic Molecular Hydrogels of Quinuclidine Grafted Bile Salts. Influence of the Ionic Strength and Counter-Ion type

Quinuclidine grafted cationic bile salts are forming salted hydrogels. An extensive investigation of the effect of the electrolyte and counterions on the gelation has been envisaged. The special interest of the quinuclidine grafted bile salt is due to its broader experimental range of gelation to study the effect of electrolyte. Rheological features of the hydrogels are typical of enthalpic networks exhibiting a scaling law of the elastic shear modulus with the concentration (scaling exponent 2.2) modeling cellular solids in which the bending modulus is the dominant parameter. The addition of monovalent salt (NaCl) favors the formation of gels in a first range (0.00117 g cm(-3) (0.02 M) < T(NaCl) < 0.04675 g cm(-3) (0.8 M)). At larger salt concentrations, the gels become more heterogeneous with nodal zones in the micron scale. Small-angle neutron scattering experiments have been used to characterize the rigid fibers ( approximately 68 A) and the nodal zones. Stress sweep and creep-recovery measurements are used to relate the lack of linear viscoelastic domain to a mechanism of disentanglement of the fibers from their associations into fagots. The electrostatic interactions can be screened by addition of salt to induce a progressive evolution toward flocculation. SEM, UV absorbance, and SAXS study of the Bragg peak at large Q-values complete the investigation.

Self-assembled composite nano-materials exploiting a thermo reversible n-acene fibrillar scaffold and organic-capped ZnO nanoparticles

An organic–inorganic composite material is obtained by self-assembly of 2,3-didecyloxy-anthracene (DDOA), an organogelator of butanol, and organic-capped ZnO nanoparticles (NPs). The ligand 3, 2,3-di(6-oxy-n-hexanoic acid)-anthracene, designed to cap ZnO and interact with the DDOA nanofibers by structural similarity, improves the dispersion of the NPs into the organogel. The composite material displays mechanical properties similar to those of the pristine DDOA organogel, but gelates at a lower critical concentration and emits significantly less, even in the presence of very small amounts of ZnO NPs. The ligand 3 could also act as a relay to promote the photo-induced quenching process.

Ammonium lithocholate nanotubes: stability and copper metallization

Ammonium lithocholate nanotubes (NHLC) have been prepared in alkaline ammonia solutions and exhibited remarkable monodisperse cross-sectional dimensions (external diameter = 52 nm) as shown by cryo-transmission electron microscopy measurements. A classical electroless metallic replication method was used with a single poly(ethylene-imine) PEI layer coating the negatively charged NHLC nanotubes. Short copper rods (external diameter ∼ 80 nm) were observed by scanning electron microscopy that corresponded to the original organic templates. The results obtained in acidic conditions are analyzed in terms of the lifetime of the self-assembled structures and formation of bundles of tubes. Dynamic light scattering measurements and optical observations show that the system in the presence of controlled amounts of hydrochloric acid is stable enough to account for a metallic replication in acidic conditions. An average apparent diffusion coefficient of the organic NHLC assemblies is extracted (∼ 9.8 × 10 nm s) in homogeneous suspensions where bundles have been dispersed by the acidic additions.

Structural Relationships in 2,3-Bis-n-decyloxyanthracene and 12-Hydroxystearic Acid Molecular Gels and Aerogels Processed in Supercritical CO2

Supercritical carbon dioxide is used to prepare aerogels of two reference molecular organogelators, 2,3-bis-n-decyloxyanthracene (DDOA) (luminescent molecule) and 12-hydroxystearic acid (HSA). Electron microscopy reveals the fibrillar morphology of the aggregates generated by the protocol. SAXS and SANS measurements show that DDOA aerogels are crystalline materials exhibiting three morphs: (1) arrangements of the crystalline solid (2D p6m), (2) a second hexagonal morph slightly more compact, and (3) a packing specific of the fibers in the gel. Aggregates specific of the aerogel (volume fraction being typically phi approximately 0.60) are developed over larger distances (approximately 1000 A) and bear fewer defaults and residual strains than aggregates in the crystalline and gel phases. Porod, Scherrer and Debye-Bueche analyses of the scattering data have been performed. The first five diffraction peaks show small variations in position and intensity assigned to the variation of the number of fibers and their degree of vicinity within hexagonal bundles of the related SAFIN according to the Oster model. Conclusions are supported by the guidelines offered by the analysis of the situation in HSA aerogels for which the diffraction pattern can be described by two coexisting lamellar-like arrangements. The porosity of the aerogel, as measured by its specific surface extracted from the scattering invariant analysis, is only 1.8 times less than that of the swollen gel and is characteristic of a very porous material.

Hydrogels as Reaction Vessels: Acenaphthylene Dimerization in Hydrogels Derived from Bile Acid Analogues

Many chemical reactions which are otherwise clean often lead to the formation of multiple products. Such products may be formed due to a lack of chemo-, regio- and/or stereoselectivity. For such reactions to be useful, one should be able to control them to yield a single desired product. Of the many approaches used in this context, the use of reaction media with features different from those of isotropic solutions has been very effective. Surfactant micelles have been shown to control the product selectivity in photochemical reactions, but the dynamic nature of the micelles probably results in differential effects on reaction selectivity. In this article we provide the results on photodimerization reactions performed in bile salt gels.

Pyrene derived functionalized low molecular weight organic gelators and gels

Pyrene derived binary functionalized low molecular weight organic gelators (FLMOGs) and gels thereof in selected organic solvents were synthesized and characterized. The functionality refers to a functional group that does not take part in formation of the supramolecular gel network, but remains free and available for other purposes, such as to bind nanoparticles or other molecules into the gel structure. Functional groups were observed to disturb gel formation strongly, if they interact with each other within the same supramolecule due to the formation of competitive structures. Preventing such interactions restored the original gel properties. A gel with weaker supramolecular bonding than the binding between the functional groups was successfully made by separating the functional groups by distance. The π–π-interaction was found to be of negligible significance to the supramolecular binding energy, but probably essential to align the molecules to a one-dimensional chain and bring them into the range of van der Waals forces mainly responsible for the binding in this system. Solvent was observed to increase the binding energy of the supramolecule. All molecules were characterized by spectroscopic techniques and elemental analysis. Selected gels were characterized with rheometry, scanning electron microscopy, UV- and fluorescence spectroscopy. Gelation kinetics and hysteresis were measured by UV-spectroscopy and a fast gelation process was observed for all the gelators studied. The melting enthalpies were measured by DSC and calculated theoretically by PM3 level of theory.

Observations of a plastic crystalline phase in solid MBBA

Wideline and high resolutionNMR studies have been carried out inMBBA in its isotropic, nematic and solid phases. Isotropie and nematic spectra correspond to what has been reported earlier. In the solid phase, contrary to expectations, very intense narrow signals similar to signals of the isotropic phase have been observed for the first time at temperatures close to the solid ↔ nematic phase transition temperature. This indicates rapid reorientational or translational motion in the system. X-ray results however confirm the existence of translational order. The results are interpreted as indicative of the existence of a plastic crystalline phase inMBBA.