Shu-Yuan Pan

Accelerated carbonation of steelmaking slags in a high-gravity rotating packed bed

Carbon dioxide (CO(2)) sequestration using the accelerated carbonation of basic oxygen furnace (BOF) slag in a high-gravity rotating packed bed (RPB) under various operational conditions was investigated. The effects of reaction time, reaction temperature, rotation speed and slurry flow rate on the CO(2) sequestration process were evaluated. The samples of reacted slurry were analyzed quantitatively using thermogravimetric analysis (TGA) and atomic absorption spectrometry (AAS) and qualitatively using X-ray diffraction (XRD), scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDX), and transmission electron microscopy (TEM). The sequestration experiments were performed at a liquid-to-solid ratio of 20:1 with a flow rate of 2.5 L min(-1) of a pure CO(2) stream under atmospheric temperature and pressure. The results show that a maximum conversion of BOF slag was 93.5% at a reaction time of 30 min and a rotation speed of 750 rpm at 65°C. The experimental data were utilized to determine the rate-limiting mechanism based on the shrinking core model (SCM), which was validated by the observations of SEM and TEM. Accelerated carbonation in a RPB was confirmed to be a viable method due to its higher mass-transfer rate.

Performance evaluation for carbonation of steel-making slags in a slurry reactor

CO(2) sequestration by the aqueous carbonation of steel-making slag under various operational conditions was investigated in this study. The effects of the operational conditions, including type of steel-making slag, reaction time, reaction temperature, and CO(2) flow rate, on the performance of the carbonation process were evaluated. The results indicated that the BOF slag had the highest carbonation conversion, approximately 72%, at a reaction time of 1h, an operating pressure of 101 kPa and a temperature of 60°C due to its higher BET surface area of BOF slag compared to UF, FA, and BHC slags. The major factors affecting the carbonation conversion are reaction time and temperature. The reaction kinetics of the carbonation conversion can be expressed by the shrinking-core model. The measurements of the carbonated material by the SEM and XRD instruments provide evidence indicating the suitability of using the shrinking-core model in this investigation. Comparison of the results with other studies suggests that aqueous carbonation by slurry reactor is viable due to its higher mass transfer rate.

Ex Situ CO2 capture by carbonation of steelmaking slag coupled with metalworking wastewater in a rotating packed bed

Both basic oxygen furnace (BOF) slag and cold-rolling wastewater (CRW) exhibiting highly alkaline characteristics require stabilization and neutralization prior to utilization and/or final disposal. Using CO2 from flue gases as the stabilizing and neutralizing agents could also diminish CO2 emissions. In this investigation, ex situ hot stove gas containing 30 vol% CO2 in the steelmaking process was captured by accelerated carbonation of BOF slag coupled with CRW in a rotating packed bed (RPB). The developed RPB process exhibits superior results, with significant CO2 removal efficiency (η) of 96-99% in flue gas achieved within a short reaction time of 1 min at 25 °C and 1 atm. Calcite (CaCO3) was identified as the main product according to XRD and SEM-XEDS observations. In addition, the elimination of lime and Ca(OH)2 in the BOF slag during carbonation is beneficial to its further use as construction material. Consequently, the developed RPB process could capture the CO2 from the flue gas, neutralize the CRW, and demonstrate the utilization potential for BOF slag. It was also concluded that carbonation of BOF slag coupled with CRW in an RPB is a viable method for CO2 capture due to its higher mass transfer rate and CO2 removal efficiency in a short reaction time.

CO2 sequestration by carbonation of steelmaking slags in an autoclave reactor.

Carbon dioxide (CO(2)) sequestration experiments using the accelerated carbonation of three types of steelmaking slags, i.e., ultra-fine (UF) slag, fly-ash (FA) slag, and blended hydraulic slag cement (BHC), were performed in an autoclave reactor. The effects of reaction time, liquid-to-solid ratio (L/S), temperature, CO(2) pressure, and initial pH on CO(2) sequestration were evaluated. Two different CO(2) pressures were chosen: the normal condition (700 psig) and the supercritical condition (1300 psig). The carbonation conversion was determined quantitatively by using thermo-gravimetric analysis (TGA). The major factors that affected the conversion were reaction time (5 min to 12h) and temperature (40-160°C). The BHC was found to have the highest carbonation conversion of approximately 68%, corresponding to a capacity of 0.283 kg CO(2)/kg BHC, in 12h at 700 psig and 160°C. In addition, the carbonation products were confirmed to be mainly in CaCO(3), which was determined by using scanning electron microscopy (SEM) and X-ray powder diffraction (XRD) to analyze samples before and after carbonation. Furthermore, reaction kinetics were expressed with a surface coverage model, and the carbon footprint of the developed technology in this investigation was calculated by a life cycle assessment (LCA).

Systematic approach to determination of maximum achievable capture capacity via leaching and carbonation processes for alkaline steelmaking wastes in a rotating packed bed

Accelerated carbonation of basic oxygen furnace slag (BOFS) coupled with cold-rolling wastewater (CRW) was performed in a rotating packed bed (RPB) as a promising process for both CO2 fixation and wastewater treatment. The maximum achievable capture capacity (MACC) via leaching and carbonation processes for BOFS in an RPB was systematically determined throughout this study. The leaching behavior of various metal ions from the BOFS into the CRW was investigated by a kinetic model. In addition, quantitative X-ray diffraction (QXRD) using the Rietveld method was carried out to determine the process chemistry of carbonation of BOFS with CRW in an RPB. According to the QXRD results, the major mineral phases reacting with CO2 in BOFS were Ca(OH)2, Ca2(HSiO4)(OH), CaSiO3, and Ca2Fe1.04Al0.986O5. Meanwhile, the carbonation product was identified as calcite according to the observations of SEM, XEDS, and mappings. Furthermore, the MACC of the lab-scale RPB process was determined by balancing the carbonation conversion and energy consumption. In that case, the overall energy consumption, including grinding, pumping, stirring, and rotating processes, was estimated to be 707 kWh/t-CO2. It was thus concluded that CO2 capture by accelerated carbonation of BOFS could be effectively and efficiently performed by coutilizing with CRW in an RPB.

Kinetic modeling on CO2 capture using basic oxygen furnace slag coupled with cold-rolling wastewater in a rotating packed bed

In this study, direct and indirect carbonation of basic oxygen furnace slag (BOFS) coupled with cold-rolling wastewater (CRW) was carried out via a rotating packed bed (RPB). The solid products were qualitatively characterized by scanning electron microscopy (SEM) and X-ray diffraction (XRD) and quantitatively analyzed with thermogravimetric analysis (TGA). The leachate was analyzed with inductively coupled plasma-optical emission spectroscopy (ICP-OES). The results indicate that the maximum achievable carbonation conversion (MACC) of BOFS was 90.7%, corresponding to a capture capacity of 0.277 g CO₂/g of BOFS, by direct carbonation with CRW under a rotation speed of 750 rpm at 30 °C for 20 min. In addition, CO₂ mass balance among the gas, liquid, and solid phases within an RPB was well-developed, with an error less than 10%, to confirm the actual CO₂ capture capacity of BOFS with precision and accuracy. Furthermore, a reaction kinetic model based on mass balance was established to determine the reaction rate constant for various liquid agents (CRW and pure water). It was concluded that co-utilization of alkaline wastes including BOFS and CRW via the RPB is a novel approach for both enhancing CO₂ capture capacity and reducing the environmental impacts of alkaline wastes.

High-Gravity Carbonation Process for Enhancing CO2 Fixation and Utilization Exemplified by the Steelmaking Industry

The high-gravity carbonation process for CO2 mineralization and product utilization as a green cement was evaluated using field operation data from the steelmaking industry. The effect of key operating factors, including rotation speed, liquid-to-solid ratio, gas flow rate, and slurry flow rate, on CO2 removal efficiency was studied. The results indicated that a maximal CO2 removal of 97.3% was achieved using basic oxygen furnace slag at a gas-to-slurry ratio of 40, with a capture capacity of 165 kg of CO2 per day. In addition, the product with different carbonation conversions (i.e., 0%, 17%, and 48%) was used as supplementary cementitious materials in blended cement at various substitution ratios (i.e., 0%, 10%, and 20%). The performance of the blended cement mortar, including physicochemical properties, morphology, mineralogy, compressive strength, and autoclave soundness, was evaluated. The results indicated that the mortar with a high carbonation conversion of slag exhibited a higher mechanical strength in the early stage than pure portland cement mortar, suggesting its suitability for use as a high early strength cement. It also possessed superior soundness compared to the mortar using fresh slag. Furthermore, the optimal operating conditions of the high-gravity carbonation were determined by response surface models for maximizing CO2 removal efficiency and minimizing energy consumption.

Validating carbonation parameters of alkaline solid wastes via integrated thermal analyses: Principles and applications

Accelerated carbonation of alkaline solid wastes is an attractive method for CO2 capture and utilization. However, the evaluation criteria of CaCO3 content in solid wastes and the way to interpret thermal analysis profiles were found to be quite different among the literature. In this investigation, an integrated thermal analyses for determining carbonation parameters in basic oxygen furnace slag (BOFS) were proposed based on thermogravimetric (TG), derivative thermogravimetric (DTG), and differential scanning calorimetry (DSC) analyses. A modified method of TG-DTG interpretation was proposed by considering the consecutive weight loss of sample with 200-900°C because the decomposition of various hydrated compounds caused variances in estimates by using conventional methods of TG interpretation. Different quantities of reference CaCO3 standards, carbonated BOFS samples and synthetic CaCO3/BOFS mixtures were prepared for evaluating the data quality of the modified TG-DTG interpretation, in terms of precision and accuracy. The quantitative results of the modified TG-DTG method were also validated by DSC analysis. In addition, to confirm the TG-DTG results, the evolved gas analysis was performed by mass spectrometer and Fourier transform infrared spectroscopy for detection of the gaseous compounds released during heating. Furthermore, the decomposition kinetics and thermodynamics of CaCO3 in BOFS was evaluated using Arrhenius equation and Kissinger equation. The proposed integrated thermal analyses for determining CaCO3 content in alkaline wastes was precise and accurate, thereby enabling to effectively assess the CO2 capture capacity of alkaline wastes for mineral carbonation.

Accelerated carbonation using municipal solid waste incinerator bottom ash and cold-rolling wastewater: performance evaluation and reaction kinetics

Accelerated carbonation of alkaline wastes including municipal solid waste incinerator bottom ash (MSWI-BA) and the cold-rolling wastewater (CRW) was investigated for carbon dioxide (CO2) fixation under different operating conditions, i.e., reaction time, CO2 concentration, liquid-to-solid ratio, particle size, and CO2 flow rate. The MSWI-BA before and after carbonation process were analyzed by the thermogravimetry and differential scanning calorimetry, X-ray diffraction, and scanning electron microscopy equipped with energy dispersive X-ray spectroscopy. The MSWI-BA exhibits a high carbonation conversion of 90.7%, corresponding to a CO2 fixation capacity of 102g perkg of ash. Meanwhile, the carbonation kinetics was evaluated by the shrinking core model. In addition, the effect of different operating parameters on carbonation conversion of MSWI-BA was statistically evaluated by response surface methodology (RSM) using experimental data to predict the maximum carbonation conversion. Furthermore, the amount of CO2 reduction and energy consumption for operating the proposed process in refuse incinerator were estimated. Capsule abstract: CO2 fixation process by alkaline wastes including bottom ash and cold-rolling wastewater was developed, which should be a viable method due to high conversion.

CO 2 Mineralization and Utilization using Steel Slag for Establishing a Waste-to-Resource Supply Chain

Both steelmaking via an electric arc furnace and manufacturing of portland cement are energy-intensive and resource-exploiting processes, with great amounts of carbon dioxide (CO2) emission and alkaline solid waste generation. In fact, most CO2 capture and storage technologies are currently too expensive to be widely applied in industries. Moreover, proper stabilization prior to utilization of electric arc furnace slag are still challenging due to its high alkalinity, heavy metal leaching potentials and volume instability. Here we deploy an integrated approach to mineralizing flue gas CO2 using electric arc furnace slag while utilizing the reacted product as supplementary cementitious materials to establish a waste-to-resource supply chain toward a circular economy. We found that the flue gas CO2 was rapidly mineralized into calcite precipitates using electric arc furnace slag. The carbonated slag can be successfully utilized as green construction materials in blended cement mortar. By this modulus, the global CO2 reduction potential using iron and steel slags was estimated to be ~138 million tons per year.