Shuai Lei

Far field 3D localization of radioactive hot spots using a coded aperture camera

This paper presents a coded aperture method to remotely estimate the radioactivity of a source. The activity is estimated from the detected counts and the estimated source location, which is extracted by factoring the effect of aperture magnification. A 6mm thick tungsten-copper alloy coded aperture mask is used to modulate the incoming gamma-rays. The location of point and line sources in all three dimensions was estimated with an accuracy of less than 10% when the source-camera distance was about 4 m. The estimated activities were 17.6% smaller and 50.4% larger than the actual activities for the point and line sources, respectively.

Design of data acquisition system and algorithm research for omnidirectional gamma-ray positioning equipment

This article introduces the design and performance of the data acquisition system used in an omnidirectional gamma-ray positioning system, along with a new method used in this system to obtain the position of radiation sources in a large field. This data acquisition system has various built-in interfaces collecting, in real time, information from the radiation detector, the video camera and the GPS positioning module. Experiments show that the data acquisition system is capable of carrying out the proposed quantitative analysis to derive the position of radioactive sources, which also satisfies the requirements of high stability and reliability.

Preliminary study of depth of interaction measurement for a PET detector

In this work we studied the feasibility of detecting the depth of interaction (DOI) with two layers of crystal arrays of LYSO and BGO scintillators coupled to a position-sensitive photomultiplier tube (PS-PMT) R8900-C12. A front-end electronics was designed, with which we got different pulse shapes for different crystals to obtain depth information. With the double integration method, we got the DOI histogram of a divided integration ratio of two crystals as the standard to determine the layer-of-interaction. The DOI accuracy, measured by scanning a 22Na slit source along the side of the module, was 98% for the LYSO layer and 95% for the BGO layer. The energy resolution at 511keV was 13.1% for LYSO and 17.1% for BGO. We obtained good crystal separation in 2D position histograms of both layers. These results could be useful in the manufacture of PET scanners with high spatial resolutions.