Shuji Ye

Orientation Determination of Protein Helical Secondary Structures Using Linear and Nonlinear Vibrational Spectroscopy

In this paper, we systematically presented the orientation determination of protein helical secondary structures using vibrational spectroscopic methods, particularly, nonlinear sum frequency generation (SFG) vibrational spectroscopy, along with linear vibrational spectroscopic techniques such as infrared spectroscopy and Raman scattering. SFG amide I signals can be collected using different polarization combinations of the input laser beams and output signal beam to measure the second-order nonlinear optical susceptibility components of the helical amide I modes, which are related to their molecular hyperpolarizability elements through the orientation distribution of these helices. The molecular hyperpolarizability elements of amide I modes of a helix can be calculated based on the infrared transition dipole moment and Raman polarizability tensor of the helix; these quantities are determined by using the bond additivity model to sum over the individual infrared transition dipole moments and Raman polarizability tensors, respectively, of the peptide units (or the amino acid residues). The computed overall infrared transition dipole moment and Raman polarizability tensor of a helix can be validated by experimental data using polarized infrared and polarized Raman spectroscopy on samples with well-aligned helical structures. From the deduced SFG hyperpolarizability elements and measured SFG second-order nonlinear susceptibility components, orientation information regarding helical structures can be determined. Even though such orientation information can also be measured using polarized infrared or polarized Raman amide I signals, SFG has a much lower detection limit, which can be used to study the orientation of a helix when its surface coverage is much lower than a monolayer. In addition, the combination of different vibrational spectroscopic techniques, for example, SFG and attenuated total reflectance Fourier transform infrared spectroscopy, provides more measured parameters for orientation determination, aiding in the deduction of more complicated orientation distributions. In this paper, we discussed two types of helices, the alpha-helix and 3-10 helix. However, the orientation determination method presented here is general and thus can be applied to study other helices as well. The calculations of SFG amide I hyperpolarizability components for alpha-helical and 3-10 helical structures with different chain lengths have also been performed. It was found that when the helices reached a certain length, the number of peptide units in the helix should not alter the data analysis substantially. It was shown in the calculation, however, that when the helix chain is short, the SFG hyperpolarizability component ratios can vary substantially when the chain length is changed. Because 3-10 helical structures can be quite short in proteins, the orientation determination for a short 3-10 helix needs to take into account the number of peptide units in the helix.

Enhanced intergrain tunneling magnetoresistance in double perovskite Sr2FeMoO6 polycrystals with nanometer-scale particles

Polycrystalline ordered double perovskite Sr2FeMoO6 bulk samples with grain size in the range of 29–45 nm have been synthesized at temperatures from 900 to 1000 °C, using a sol-gel method. We find that the intergrain magnetoresistance is closely correlated with the grain size. The sample with the grain size of 29 nm shows large magnetoresistance Δρ/ρ0, 30%–20% at a low magnetic field of 4 kG over a wide temperature range from 20 to 300 K. The results can be explained in terms of spin-dependent intergrain tunneling model.

Molecular interactions between magainin 2 and model membranes in situ

In this paper, we investigated the molecular interactions of magainin 2 with model cell membranes using sum frequency generation (SFG) vibrational spectroscopy and attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR). Symmetric 1-palmitoyl-2-oleoyl-sn-glycero-3-[Phospho-rac-(1-glycerol)] (POPG) and 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) bilayers, which model the bacterial and mammalian cell membranes, respectively, were used in the studies. It was observed by SFG that magainin 2 orients relatively parallel to the POPG lipid bilayer surface at low solution concentrations, around 200 nM. When increasing the magainin 2 concentration to 800 nM, both SFG and ATR-FTIR results indicate that magainin 2 molecules insert into the POPG bilayer and adopt a transmembrane orientation with an angle of about 20 degrees from the POPG bilayer normal. For the POPC bilayer, even at a much higher peptide concentration of 2.0 microM, no ATR-FTIR signal was detected. For this concentration on POPC, SFG studies indicated that magainin 2 molecules adopt an orientation nearly parallel to the bilayer surface, with an orientation angle of about 75 degrees from the surface normal. This shows that SFG has a much better detection limit than ATR-FTIR and can therefore be applied to study interfacial molecules with a much lower surface coverage. This magainin 2 orientation study and further investigation of the lipid bilayer SFG signals support the proposed toroidal pore model for the antimicrobial activity of magainin 2.

Observing a model ion channel gating action in model cell membranes in real time in situ: membrane potential change induced alamethicin orientation change.

Ion channels play crucial roles in transport and regulatory functions of living cells. Understanding the gating mechanisms of these channels is important to understanding and treating diseases that have been linked to ion channels. One potential model peptide for studying the mechanism of ion channel gating is alamethicin, which adopts a split α/3(10)-helix structure and responds to changes in electric potential. In this study, sum frequency generation vibrational spectroscopy (SFG-VS), supplemented by attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), has been applied to characterize interactions between alamethicin (a model for larger channel proteins) and 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) lipid bilayers in the presence of an electric potential across the membrane. The membrane potential difference was controlled by changing the pH of the solution in contact with the bilayer and was measured using fluorescence spectroscopy. The orientation angle of alamethicin in POPC lipid bilayers was then determined at different pH values using polarized SFG amide I spectra. Assuming that all molecules adopt the same orientation (a δ distribution), at pH = 6.7 the α-helix at the N-terminus and the 3(10)-helix at the C-terminus tilt at about 72° (θ(1)) and 50° (θ(2)) versus the surface normal, respectively. When pH increases to 11.9, θ(1) and θ(2) decrease to 56.5° and 45°, respectively. The δ distribution assumption was verified using a combination of SFG and ATR-FTIR measurements, which showed a quite narrow distribution in the angle of θ(1) for both pH conditions. This indicates that all alamethicin molecules at the surface adopt a nearly identical orientation in POPC lipid bilayers. The localized pH change in proximity to the bilayer modulates the membrane potential and thus induces a decrease in both the tilt and the bend angles of the two helices in alamethicin. This is the first reported application of SFG to the study of model ion channel gating mechanisms in model cell membranes.

In situ molecular level studies on membrane related peptides and proteins in real time using sum frequency generation vibrational spectroscopy.

Sum frequency generation (SFG) vibrational spectroscopy has been demonstrated to be a powerful technique to study the molecular structures of surfaces and interfaces in different chemical environments. This review summarizes recent SFG studies on hybrid bilayer membranes and substrate-supported lipid monolayers and bilayers, the interaction between peptides/proteins and lipid monolayers/bilayers, and bilayer perturbation induced by peptides/proteins. To demonstrate the ability of SFG to determine the orientations of various secondary structures, studies on the interactions between different peptides/proteins (melittin, G proteins, alamethicin, and tachyplesin I) and lipid bilayers are discussed. Molecular level details revealed by SFG in these studies show that SFG can provide a unique understanding on the interactions between a lipid monolayer/bilayer and peptides/proteins in real time, in situ and without any exogenous labeling.

Interactions of Alamethicin with Model Cell Membranes Investigated Using Sum Frequency Generation Vibrational Spectroscopy in Real Time in Situ

Structures of membrane-associated peptides and molecular interactions between peptides and cell membrane bilayers govern biological functions of these peptides. Sum frequency generation (SFG) vibrational spectroscopy has been demonstrated to be a powerful technique to study such structures and interactions at the molecular level. In this research, SFG has been applied, supplemented by attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), to characterize the interactions between alamethicin (a model for larger channel proteins) and different lipid bilayers in the absence of membrane potential. The orientation of alamethicin in lipid bilayers has been determined using SFG amide I spectra detected with different polarization combinations. It was found that alamethicin adopts a mixed alpha-helical and 3(10)-helical structure in fluid-phase lipid bilayers. The helix (mainly alpha-helix) at the N-terminus tilts at about 63 degrees versus the surface normal in a fluid-phase 1,2-dimyristoyl-d54-sn-glycero-3-phosphocholine-1,1,2,2-d4-N,N,N-trimethyl-d9 (d-DMPC)/1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) bilayer. The 3(10)-helix at the C-terminus (beyond the Pro14 residue) tilts at about 43 degrees versus the surface normal. This is the first time to apply SFG to study a 3(10)-helix experimentally. When interacting with a gel-phase lipid bilayer, alamethicin lies down on the gel-phase bilayer surface or aggregates or both, which does not have significant insertion into the lipid bilayer.

Orientation difference of chemically immobilized and physically adsorbed biological molecules on polymers detected at the solid/liquid interfaces in situ

A surface sensitive second order nonlinear optical technique, sum frequency generation vibrational spectroscopy, was applied to study peptide orientation on polymer surfaces, supplemented by a linear vibrational spectroscopy, attenuated total reflectance Fourier transform infrared spectroscopy. Using the antimicrobial peptide Cecropin P1 as a model system, we have quantitatively demonstrated that chemically immobilized peptides on polymers adopt a more ordered orientation than less tightly bound physically adsorbed peptides. These differences were also observed in different chemical environments, for example, air versus water. Although numerous studies have reported a direct correlation between the choice of immobilization method and the performance of an attached biological molecule, the lack of direct biomolecular structure and orientation data has made it difficult to elucidate the relationship between structure, orientation, and function at a surface. In this work, we directly studied the effect of chemical immobilization method on biomolecular orientation/ordering, an important step for future studies of biomolecular activity. The methods for orientation analysis described within are also of relevance to understanding biosensors, biocompatibility, marine-antifouling, membrane protein functions, and antimicrobial peptide activities.

Energy transfer rates and impact sensitivities of crystalline explosives

Abstract The energy transfer rates between phonons and vibrons in the “doorway region” could be the rate-determining step for impact-induced detonation of molecular crystalline explosives. To investigate the relationship between impact sensitivities and energy transfer, the overall rate of energy transfer in the doorway region is estimated on the basis of a simple theory in which the rate is proportional to a product of the number of states and the rate of population relaxation. We estimated frequencies of normal mode vibrations of PETN, β-HMX, RDX, Tetryl, TNT, FOX-7, m-DNB, ANTA, PN, NQ, NTO, and DMN by means of density functional theory calculations at the B3LYP/6-31G(d) level of theory. Normal mode vibrations of TATB were evaluated by using empirical intra-molecular potentials. The number of doorway modes in the regions of 200 to 700 cm −1 was evaluated by the direct counting method. It is found that the number of doorway modes shows a strong correlation with impact sensitivities obtained by drop hammer tests. This can be explained by the theory, if we assume that the rate of population relaxation is almost the same for all of the explosives investigated in the present work. This assumption is consistent with recent experimental measurements of energy transfer rates of explosives at low temperatures.

Accurate Determination of Interfacial Protein Secondary Structure by Combining Interfacial-Sensitive Amide I and Amide III Spectral Signals

Accurate determination of protein structures at the interface is essential to understand the nature of interfacial protein interactions, but it can only be done with a few, very limited experimental methods. Here, we demonstrate for the first time that sum frequency generation vibrational spectroscopy can unambiguously differentiate the interfacial protein secondary structures by combining surface-sensitive amide I and amide III spectral signals. This combination offers a powerful tool to directly distinguish random-coil (disordered) and α-helical structures in proteins. From a systematic study on the interactions between several antimicrobial peptides (including LKα14, mastoparan X, cecropin P1, melittin, and pardaxin) and lipid bilayers, it is found that the spectral profiles of the random-coil and α-helical structures are well separated in the amide III spectra, appearing below and above 1260 cm(-1), respectively. For the peptides with a straight backbone chain, the strength ratio for the peaks of the random-coil and α-helical structures shows a distinct linear relationship with the fraction of the disordered structure deduced from independent NMR experiments reported in the literature. It is revealed that increasing the fraction of negatively charged lipids can induce a conformational change of pardaxin from random-coil to α-helical structures. This experimental protocol can be employed for determining the interfacial protein secondary structures and dynamics in situ and in real time without extraneous labels.

Terahertz dielectric assay of solution phase protein binding

The authors demonstrate a method for rapid determination of protein-ligand binding on solution phase samples using terahertz dielectric spectroscopy. Measurements were performed using terahertz time domain spectroscopy on aqueous solutions below the liquid-solid transition for water. Small ligand binding sensitivity was demonstrated using triacetylglucosamine and hen egg white lysozyme with a decrease in dielectric response with binding. The magnitude of the change increases with frequency.