Shuqin Bo

Phase Behavior of Poly(sulfobetaine methacrylate)-Grafted Silica Nanoparticles and Their Stability in Protein Solutions

Biocompatible and zwitterionic poly(sulfobetaine methacrylate) (PSBMA) was grafted onto the surface of initiator-modified silica nanoparticles via surface-initiated atom transfer radical polymerization. The resultant samples were characterized via nuclear magnetic resonance, Fourier transform infrared spectroscopy, transmission electron microscopy, and thermogravimetric analysis. Their molecular weights and molecular weight distributions were determined via gel permeation chromatography after the removal of silica by etching. Moreover, the phase behavior of these polyzwitterionic-grafted silica nanoparticles in aqueous solutions and stability in protein/PBS solutions were systematically investigated. Dynamic light scattering and UV-visible spectroscopy results indicate that the silica-g-PSBMA nanoparticles exhibit an upper critical solution temperature (UCST) in aqueous solutions, which can be controlled by varying the PSBMA molecular weight, ionic strength, silica-g-PSBMA nanoparticle concentration, and solvent polarity. The UCSTs shift toward high temperatures with increasing PSBMA molecular weight and silica-g-PSBMA nanoparticle concentration. However, increasing the ionic strength and solvent polarity leads to a lowering of the UCSTs. The silica-g-PSBMA nanoparticles are stable for at least 72 h in both negative and positive protein/PBS solutions at 37 °C. The current study is crucial for the translation of polyzwitterionic solution behavior to surfaces to exploit their diverse properties in the development of new, smart, and responsive coatings.

Solvent gradient fractionation and chain microstructure of complex branched polyethylene resin

AbstractA complex branched polyethylene resin with excellent processing and film-forming properties is fractionated through solvent gradient fractionation (SGF) technique. Here, the good solvent is 1,2,4-trimethylbenzene (TMB) and poor solvent is ethyl cellosolve (ECS). The fractions are further analyzed using high-temperature gel permeation chromatography (GPC) coupled with triple detectors (refractive index (RI)-light scattering (LS)-viscometer (VIS)), and 13C-nuclear magnetic resonance spectroscopy (13C-NMR). The molecular weight distribution of SGF fractions is very narrow, most of them are less than 1.1. The molecular weights of SGF fractions gradually increase as the content of good solvent increases in the mixture. The fractions with different molecular weights all have branching structure, the short chain branching is major in all fractions and along with certain content of long chain branching. Branching distribution across the molecular weight distribution is discussed in detail, and branching distribution within a SGF fraction is also researched.n Graphical abstractA complex branched polyethylene resin is fractionated through solvent gradient fractionation (SGF) according to molecular weight. It is elaborated how to select appropriate experimental condition in order to obtain fractions with narrow molecular weight distribution. And the branching distribution in each molecular weight region of the whole resin is clearly understood.

pH/Temperature-Responsive Behavior of Amphiphilic Block Copolymer Micelles Prepared Using Two Different Methods

The pH- and temperature-responsive behavior of amphiphilic block copolymer poly(L-lactide)-b-poly(2-(dimethylamino)ethyl methacrylate) (PLLA-b-PDMAEMA) in aqueous solutions is investigated using static and dynamic light scattering. Electrostatic force, hydrophobic interaction, and hydrogen bonding coexist in the system. Micelles with different structures are prepared using water addition (WA) and direct dissolution (DD) methods. The aggregation from loose micelles into large micellar clusters is observed above the transition temperature under basic conditions. Only micellar clusters from the DD method could disaggregate when temperature was decreased to 24.3 °C after heating. The behavior of the micelles prepared with the DD method indicates that only the outer parts of the PLLA-b-PDMAEMA chains in the corona are solvated.

Microstructure characterization of a complex branched low-density polyethylene

A low-density polyethylene (LDPE) resin with excellent processing and film-forming properties is fractionated through temperature rising elution fractionation (TREF) technique. The chain structures of both the original resin and its fractions are further analyzed using high-temperature gel permeation chromatography (GPC) coupled with triple detectors (refractive index (RI)-light scattering (LS)-viscometer (VIS)), 13C-nuclear magnetic resonance spectroscopy (13C-NMR), Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC) and successive self-nucleation/annealing (SSA) thermal fractionation. The 13C-NMR results show that the original resin has both short chain branch (SCB) (2.82 mol%) and long chain branch (LCB) (0.52 mol%) structures. The FTIR results indicate that the methyl numbers (per 1000 C) of the fractions gradually decrease from 81 to 46 with increasing elution temperature from 25 °C to 75 °C. The TREF-GPC cross-fractionation results show that the main component is collected at around 68 °C. The molecular weight of the components in the high elution temperatures of 60 °C to 75 °C is from 2.0 × 103 g/mol to 2.0 × 106 g/mol, and the relative amount is more than 80%. In the low elution temperature region below 50 °C, the molecular weights of the components range from 1.0 × 103 g/mol to 1.6 × 104 g/mol, and the relative amount is less than 10%. In the DSC results, the melting peaks of the fractions gradually increase from 80.1 °C to 108.8 °C with elution temperature. In the SSA thermal fractionation, each resin fraction shows a broad range of endotherm with multiple melting peaks (more than eight peaks). The melting peaks shift toward high temperatures with the elution temperature. The characteristic chain microstructure for the resin is also discussed in detail.

Novel macrocyclic precursors of poly{aryl ether ketone (sulfone)} containing hexafluoroisopropylidene units: Synthesis, characterization, and polymerization

Cyclic oligomers containing hexafluoroiso-propylidene(HFIP) units were prepared in excellent yields by a nucleophilic aromatic substitution reaction of 4,4(7)- (hexafluoroisopropylidene) diphenol with difluoro-monomers in the presence of anhydrous potassium carbonate under pseudo high dilution conditions. A combination of GPC, MALDI-TOF MS and NMR analysis confirmed the structure of the cyclic oligomers. All macrocyclic oligomers are crystalline and undergo facile melt polymerization to give high molecular weight fluorinated polyethers.

Synthesis and polymerization of some macrocyclic (arylene ether sulfone) containing cardo groups and macrocyclic (arylene ether ketone sulfone) oligomers

Some novel macrocyclic (arylene ether sulfone) containing cardo groups and (arylene ether ketone sulfone) oligomers have been synthesized in high yields by a nucleophilic aromatic substitution reaction of 4,4-difluorophenylsulfone with bisphenols in the presence of anhydrous potassium carbonate under a pseudo-high-dilution condition. Detailed structural characterization of these oligomers by matrix-assisted laser desorption/ionization-time of flight-mass spectrometry (MALDI-TOF-MS), fast atom bombardment mass spectrometry (f.a.b.-m.s.), nuclear magnetic resonance spectrometry (n.m.r.) and single-crystal X-ray structure analysis confirms their cyclic nature, and the composition of the oligomeric mixtures is provided by g.p.c. analysis. Ring polymerization of cyclic oligomers 3a to a high molecular weight polymer with M-w of 59.1 k was achieved by heating at 290 degrees C for 40 min in the presence of a nucleophilic initiator

Calibration curve establishment and fractionation temperature selection of polyethylene for preparative temperature rising elution fractionation

A series of copolymers of ethylene with 1-hexene synthesized using a metallocene catalyst are selected and mixed. The blend is fractionated via preparative temperature rising elution fractionation (P-TREF). All fractions are characterized via high-temperature gel permeation chromatography (GPC), 13C nuclear magnetic resonance spectroscopy (13C-NMR), and differential scanning calorimetry (DSC). The changes in the DSC melting peak temperatures of the fractions from P-TREF as a function of elution temperature are almost linear, thereby providing a reference through which the elution temperature of TREF experiments could be selected. Moreover, the standard calibration curve (ethylene/1-hexene) of P-TREF is established, which relates to the degree of short-chain branching of the fractions. The standard calibration curve of P-TREF is beneficial to study on the complicated branching structure of polyethylene. A convenient method for selecting the fractionation temperature for TREF experiments is elaborated. The polyethylene sample is fractionated via successive self-nucleation and annealing (SSA) thermal fractionation. A multiple-melting endotherm is obtained through the final DSC heating scan for the sample after SSA thermal fractionation. A series of fractionation temperatures are then selected through the relationship between the DSC melting peak temperature and TREF elution temperature.

Microstructure characterization of short-chain branching polyethylene with differential scanning calorimetry and successive selfnucleation/annealing thermal fractionation

A series of the copolymers of ethylene with 1-hexene (M1-M9) synthesized by metallocene catalyst Et[Ind]2ZrCl2/MAO was studied by differential scanning calorimetry and successive self-nucleation and annealing (SSA) thermal fractionation. The distribution of methylene sequence length (MSL) in the different copolymers was determined using the SSA method. The comonomer contents of samples M4 and M5 are 2.04 mol% and 2.78 mol%, respectively. Both M4 and M5 have low comonomer content and their MSL distribution profiles exhibit a monotonous increase trend with their MSL. The longest MSL of M5 is 167, and its corresponding molar percent is 43.95%, which is higher than that of M4. Moreover, the melting temperature (Tm) of M5 is also higher than that of M4. The comonomer contents of samples M7, M8, and M9 are 8.73 mol%, 14.18 mol% and 15.05 mol%, respectively. M7, M8, and M9 have high comonomer contents, and their MSL distribution profiles display unimodality. M7 has a lower peak value of 33 and a narrow MSL distribution, resulting in a Tm lower than that of M8 and M9. The MSL and its distribution are also key points that influence the melting behavior of copolymers. Sometimes, MSL and its distribution of copolymers have a greater impact on it than the total comonomer contents, which is different from traditional views.

Novel macrocyclic aryl thioether ester oligomers: structure characterization and free-radical ring opening polymerization

Novel macrocyclic aryl thioether ester oligomers have been synthesized in high yield from phthaloyl dichloride and 4,4-thiodiphenol under pseudo high dilution conditions. The cyclic nature was unambiguously confirmed by a combination of MALDI-TOF MS, gel permeation chromatography and NMR analyses. Single-crystal X-ray diffraction of cyclic ester dimer reveals no severe strain on the cyclic structure. The free-radical ring opening polymerization (ROP) of the macrocyclic oligomers was achieved to give high molecular weight polymers via a transthioetherification reaction. The molecular weight of the polymer resulting from ROP decreases as the conversion of cyclic oligomers increases after a polymerization period of 30 min.

Molecular chain heterogeneity of a branched polyethylene resin using cross-fractionation techniques

AbstractThe typical standard long chain branching (LCB) polyethylene (PE) SRM1476 is issued by the American National Bureau of Standards, which is widely used as a standard reference material in chromatographic experiments. Although some works have been reported in literatures, they are not consistent, such as the data about its molecular weight and molecular weight distribution. Therefore, it is necessary to further investigate the microstructure features of SRM1476 in order to better serve as a reference object in comparison with other unknown resins. In this study, the molecular chain heterogeneity of SRM1476 is investigated extensively and compared with the linear PE SRM1475. Based on the characterization of the original sample, SRM1476 actually has both LCB and short chain branching (SCB) structures, as well as the SCB content is more than LCB content in 13C-NMR results. After successive self-nucleation and annealing (SSA) thermal fractionation, SRM1476 shows a broad-range endotherm with multiple melting peaks (more than eight peaks), which proves the molecular chain heterogeneity in SRM1476. SRM1476 is fractionated into nine fractions by preparative temperature rising elution fractionation (TREF). At the high elution temperature region, the amounts of fractions are more than 90xa0%, and their molecular weights are higher. At the low elution temperature region below 50xa0°C, molecular weights of fractions are lower and their amounts are less than 5xa0%. Differential scanning calorimetry (DSC) melting curves of TREF fractions with higher elution temperatures shift toward higher temperature with sharper melting peaks. In the results of TREF-SSA cross-fractionation, each fraction shows a broad-range endotherm with multiple melting peaks that shift toward the high elution temperature region with the elution temperature. The arithmetic mean methylene sequence lengths of TREF fractions gradually increase from 33 to 105 as elution temperature increases. Results from TREF-DSC and TREF-SSA cross-fractionations indicate that SRM1476 and its TREF fractions have both intramolecular and intermolecular heterogeneity.n Graphical AbstractThe typical long chain branching PE SRM1476 is studied extensively using different cross-fractionation methods, which actually contains both LCB and SCB structures. Moreover, it is found that TREF can separates semi-crystalline polymers according to short branching chains, but also has a certain separating ability for long branching chains. The cross-fractionation methods from the combination of TREF with other techniques are very effective approaches in studying molecular chain heterogeneities of branched PE resins.