Sidiney Nascimento Silva

Wear mechanism for blast furnace hearth refractory lining

Abstract Over recent years, owing to the need to increase productivity, it has been necessary among other things to increase the hot metal temperature in the blast furnace hearth. As a result, refractory lining wear becomes more intense. While publications present a host of comparative tests for hearth refractories and their performance, hardly any information is available in such publications regarding reaction mechanisms and further deterioration of these materials. Based upon comparative laboratory test results using two carbon materials of different concepts, the various reaction mechanisms and enhanced refractory lining deterioration for the blast furnace hearth have been identified. From an understanding of these wear mechanisms acting upon the hearth lining, it has been decided to introduce some practical operating measures, with a view to extending the blast furnace campaign.

Behaviour of biofuel addition on metallurgical properties of sinter

Abstract Blast furnace gas yield is essentially controlled by a gas-solid reaction phenomenon, which strongly influences hot metal manufacturing costs. As a result of rising prices for reducing agents on the international market, Companhia Siderúrgica Nacional decided to inject natural gas into its blast furnaces. With more gas inside the furnace, the burden permeability became even more critical. To improve blast furnace gas yield, a new technological approach was adopted; raising the metallic burden reaction surface. To that end, a special sinter was developed with permeability being controlled by adding micropore nucleus forming agents, cellulignin coal, without, however, degrading its mechanical properties. This paper shows the main process parameters and the results from physicochemical characterisation of a sinter with controlled permeability, on a pilot scale, compared to those of conventional sinter. Gas flow laboratory simulations have conclusively corroborated the positive effects of micropore nucleus forming agents on enhancing sinter permeability.

AVALIAÇÃO DO POTENCIAL DE EXPANSÃO DE ESCÓRIA DE ACIARIA LD: UMA NOVA METODOLOGIA

Resumo A escória de aciaria LD é um coproduto abudantemente gerado através da metalurgia primária e secundária, sendo que após seu resfriamento e beneficiamento pode ser aplicado em diversos setores, mas que necessita ser submetido a processo de envelhecimento para minimização da expansão. Em geral, no Brasil, o Método PTM-130/78 é o mais utilizado para avaliar o potencial de expansão, entretanto o método leva 14 dias para obtenção dos resultados. Por meio de uma cooperação técnico-econômica entre a CSN e a EEL-USP, o método de expansão foi correlacionado com as fases identificadas e quantificadas por Difratometria de Raios-X e Método de Rietveld, respectivamente, além de compreender o mecanismo de expansão. Análises de regressão múltipla permitiram ajustar modelos matemáticos com 97,0% de ajuste e uma redução no tempo de ensaio de 14 dias (336 horas) para 7 horas. Palavras-chave : Método de Rietveld; Escória de aciaria; Expansão de escória; DRX.

Revamping of CSN BF2 hot blast stove no. 1

Abstract CSN BF no. 2 has only three hot blast stoves. Owing to the operational risks as well as output losses associated with the BF operation with just two hot blast stoves, the revamping time of this equipment becomes a crucial issue, requiring special attention in each phase of the project from planning to execution so as to shorten the time as much as possible. According to this context, the present paper describes in detail the main technologies used in the last revamping of hot blast stoves carried out in February 2007. These technologies included an accelerated cooling down curve, air conditioning system (good working condition) and convection heating system, which in association with an innovative construction methodology, involving movable and multilevel platforms, has allowed the project to be completed from blow to blow in a record time of just 67 days and 10 h, resulting in a reduction of costs around R

Foundry sand recycling in the troughs of blast furnaces: a technical note

3·4m.