Siegward D. Heintze

FDI World Dental Federation: clinical criteria for the evaluation of direct and indirect restorations—update and clinical examples

In 2007, new clinical criteria were approved by the FDI World Dental Federation and simultaneously published in three dental journals. The criteria were categorized into three groups: esthetic parameters (four criteria), functional parameters (six criteria) and biological parameters (six criteria). Each criterion can be expressed with five scores, three for acceptable and two for non-acceptable (one for reparable and one for replacement). The criteria have been used in several clinical studies since 2007, and the resulting experience in their application has led to a requirement to modify some of the criteria and scores. The two major alterations involve staining and approximal contacts. As staining of the margins and the surface has different causes, both phenomena do not appear simultaneously. Thus, staining has been differentiated into marginal staining and surface staining. The approximal contact now appears under the name “approximal anatomic form” as the approximal contour is a specific, often non-esthetic issue that cannot be integrated into the criterion “esthetic anatomical form”. In 2008, a web-based training and calibration tool called e-calib (www.e-calib.info) was made available. Clinical investigators and other research workers can train and calibrate themselves interactively by assessing clinical cases of posterior restorations which are presented as high-quality pictures. Currently, about 300 clinical cases are included in the database which is regularly updated. Training for eight of the 16 clinical criteria is available in the program: “Surface lustre”; “Staining (surface, margins)”; “Color match and translucency”; Esthetic anatomical form”; “Fracture of material and retention”; “Marginal adaptation”; “Recurrence of caries, erosion, abfraction”; and “Tooth integrity (enamel cracks, tooth fractures)”. Typical clinical cases are presented for each of these eight criteria and their corresponding five scores.

Clinical relevance of tests on bond strength, microleakage and marginal adaptation.

Dental adhesive systems should provide a variety of capabilities, such as bonding of artificial materials to dentin and enamel, sealing of dentinal tubules, reduction of post-operative sensitivity and marginal sealing to reduce marginal staining and caries. In the laboratory, numerous surrogate parameters that should predict the performance of different materials, material combinations and operative techniques are assessed. These surrogate parameters include bond strength tests of various kinds, evaluation of microleakage with tracer penetration between restorative and tooth, two-dimensional analysis of marginal quality with microscopes and mapping of the micromorphology of the bonding interface. Many of these tests are not systematically validated and show therefore different results between different research institutes. The correlation with clinical phenomena has only partly been established to date. There is some evidence, that macrotensile and microtensile bond strength tests correlate better with clinical retention of cervical restorations than macroshear and microshear bond tests but only if data from different test institutes are pooled. Also there is some evidence that marginal adaptation has a moderate correlation in cervical restorations with clinical retention and in Class II restorations (proximal enamel) with clinical marginal staining. There is moderate evidence that microleakage tests with dye penetration does not correlate with any of the clinical parameters (post-operative hypersensitivity, retention, marginal staining). A rationale which helps the researcher to select and apply clinically relevant test methods in the laboratory is presented in the paper.

Wear behavior of dental Y-TZP ceramic against natural enamel after different finishing procedures

OBJECTIVE The aim of this in vitro study was to evaluate the influence of different finishing procedures on the wear behavior of zirconia against natural enamel. METHODS 64 quadratic specimens (10 mm × 10 mm × 2 mm) were cut from a commercial hipped dental Y-TZP ceramic. Four different groups with 16 specimens each were formed according to the following finishing procedures: PZ (polished), RR (fine-grit diamond), GR (coarse-grit diamond), GZ (glazed). Polished specimens of a leucite-reinforced glass ceramic (Empress CAD) were used as a control (GC). The materials were subjected to the Ivoclar wear method (Willytec chewing simulator, 120,000 cycles, 5kg weight) with 80 natural caries-free cusps of first upper molars as antagonists. Wear was analyzed for both the enamel cusps and test specimens by measurement of the vertical substance loss with a laser scanner. Surface roughness was measured by means of a white-light interferometer. RESULTS The surface roughness was significantly different among the polished, diamond-finished, and glazed ceramic specimens (ANOVA, post hoc Bonferroni p<0.05). The results of the one-way ANOVA indicated that the finishing technique significantly affected enamel wear (p<0.05). The post hoc test indicated that the specimens finished with the coarse diamond caused significantly higher antagonist wear than the polished ones. Polished zirconia showed the lowest wear of the antagonist enamel, with a mean value of 171.74 (SD = 121.68), and resulted in enamel wear that was not significantly different from that of the glass ceramic control group. No significant linear correlation could be found between pre-testing surface roughness and abrasive wear. SIGNIFICANCE If zirconia is used without veneering material for crowns and fixed dental prostheses (FDPs), the surface must be well-polished if occlusal adjustments with coarse diamonds are performed. The polishing step reduces the wear of the opposing enamel.

Clinical performance of cervical restorations— A meta-analysis

OBJECTIVES To carry out a meta-analysis in order to assess the influencing factors on retention loss and marginal discoloration of cervical restorations made of composites and glass ionomer (derivates). METHODS The literature was searched for prospective clinical studies on cervical restorations with an observation period of at least 18 months. RESULTS Fifty clinical studies involving 40 adhesive systems matched the inclusion criteria. On average, 10% of the cervical fillings were lost and 24% exhibited marginal discoloration after 3 years. The variability ranged from 0% to 50% for retention loss and from 0% to 74% for marginal discoloration. Hardly any secondary caries was detected. When linear mixed models with a study and experiment effect were used, the analysis revealed that the adhesive/restorative class had the most significant influence, with 2-step self-etching adhesive systems performing best and 1-step self-etching adhesive systems performing worst; 3-step etch-and-rinse systems, glass ionomers/resin-modified glass ionomers, 2-step etch-and-rinse systems and polyacid-modified resin composites were ranked in between. Restorations placed in teeth whose dentin/enamel had been prepared/roughened showed a statistically significant higher retention rate than those placed in teeth with unprepared dentin (p<0.05). Beveling of the enamel and the type of isolation used (rubberdam/cotton rolls) had no significant influence. SIGNIFICANCE The clinical performance of cervical restorations is significantly influenced by the type of adhesive system used and/or the adhesive class to which the system belonged and whether the dentin/enamel is prepared or not. 2-Step self-etching- and 3-step etch&rinse systems shall be chosen over 1-step self-etching systems and glass ionomer derivates. The dentin (and enamel) surface shall be roughened before placement of the restoration.

Surface deterioration of dental materials after simulated toothbrushing in relation to brushing time and load

OBJECTIVES (1) To evaluate the changes in surface roughness and gloss after simulated toothbrushing of 9 composite materials and 2 ceramic materials in relation to brushing time and load in vitro; (2) to assess the relationship between surface gloss and surface roughness. METHODS Eight flat specimens of composite materials (microfilled: Adoro, Filtek Supreme, Heliomolar; microhybrid: Four Seasons, Tetric EvoCeram; hybrid: Compoglass F, Targis, Tetric Ceram; macrohybrid: Grandio), two ceramic materials (IPS d.SIGN and IPS Empress polished) were fabricated according to the manufacturers instructions and optimally polished with up to 4000 grit SiC. The specimens were subjected to a toothbrushing (TB) simulation device (Willytec) with rotating movements, toothpaste slurry and at three different loads (100g/250g/350g). At hourly intervals from 1h to 10h TB, mean surface roughness Ra was measured with an optical sensor and the surface gloss (Gl) with a glossmeter. Statistical analysis was performed for log-transformed Ra data applying two-way ANOVA to evaluate the interaction between load and material and load and brushing time. RESULTS There was a significant interaction between material and load as well as between load and brushing time (p<0.0001). The microhybrid and hybrid materials demonstrated more surface deterioration with higher loads, whereas with the microfilled resins Heliomolar and Adoro it was vice versa. For ceramic materials, no or little deterioration was observed over time and independent of the load. The ceramic materials and 3 of the composite materials (roughness) showed no further deterioration after 5h of toothbrushing. Mean surface gloss was the parameter which discriminated best between the materials, followed by mean surface roughness Ra. There was a strong correlation between surface gloss and surface roughness for all the materials except the ceramics. The evaluation of the deterioration curves of individual specimens revealed a more or less synchronous course suspecting hinting specific external conditions and not showing the true variability in relation to the tested material. SIGNIFICANCE The surface roughness and gloss of dental materials changes with brushing time and load and thus results in different material rankings. Apart from Grandio, the hybrid composite resins were more prone to surface changes than microfilled composites. The deterioration potential of a composite material can be quickly assessed by measuring surface gloss. For this purpose, a brushing time of 10h (=72,000 strokes) is needed. In further comparative studies, specimens of different materials should be tested in one series to estimate the true variability.

Fracture frequency of all-ceramic crowns during dynamic loading in a chewing simulator using different loading and luting protocols

OBJECTIVE The purpose of this laboratory study was to compare the frequency of failures (complete fractures or partial cracks) of molar crowns made of two different all-ceramic materials during dynamic loading in a chewing simulator, as well as the fracture load when subjected to static loading, in relation to different dynamic loading and luting protocols. METHODS One hundred and forty-four molar crowns fabricated with IPS Empress or an experimental e.max Press material with high translucency (e.max Press Exp) were luted on CAD/CAM milled PMMA abutments (first lower molar, circular chamfer) either with Variolink or glass-ionomer cement (GIC). All crowns were loaded according to three different loading protocols (n=12 per group) and two force profiles (sinusoidal, rectangular) in a pneumatically driven chewing simulator with a steel stylus (Ø 8 mm) and they underwent simultaneous thermocycling (5 degrees C/55 degrees C). After each phase the crowns were evaluated with regard to fractures or cracks. After dynamic testing, the crowns that did not fail were subjected to compression loading until complete fracture in a universal testing machine (UTM). As control groups, unloaded crowns were also subjected to a UTM. Survival statistics with log-rank tests were applied for the results of the dynamic loading, while ANOVA with post hoc Tukey B was used for the fracture load results and two-way ANOVA was carried out for logarithmically transformed data. Weibull statistics were calculated for pooled fracture load data of the dynamically loaded and control groups. RESULTS In the 144 IPS Empress crowns, complete fractures were observed in 9 crowns and partial cracks in another 3 crowns. When the data was pooled, a statistically significant increase in fractures occurred when the sinusoidal force profile was applied compared to a rectangular force profile (log-rank, p<0.05). No fractures occurred in the e.max Press Exp crowns. The two-way ANOVA showed that the type of luting protocol used had the most significant effect on the fracture load of both materials. In conjunction with Empress, however, the luting material influenced the variability twice as much as in e.max Press Exp. There was no statistically significant difference in the fracture load of GIC-luted e.max Press Exp crowns and that of the Variolink luted Empress crowns. The force profile had a significant effect on the fracture load only of the Empress crowns but not of the e.max Press Exp crowns. Weibull statistics revealed a higher scattering of the data of dynamically loaded crowns compared to that of the control groups. CONCLUSIONS For testing all-ceramic materials, dynamic loading is indispensable to draw valid conclusions on clinical performance of all-ceramic molar crowns. A sinusoidal profile is advisable, while a gradual increase of the force amplitude does not significantly affect the results.

Crown pull-off test (crown retention test) to evaluate the bonding effectiveness of luting agents

OBJECTIVE The purpose of this review was to assess the influencing factors which affect laboratory tests that evaluate the effectiveness of luting agents on the retention of crowns in prepared dentin and - based on the results of the review - to propose a reasonable experimental setup. MATERIALS AND METHODS The database MEDLINE was systematically searched for laboratory methods that evaluated the effectiveness of luting agents by pulling off crowns from prepared extracted teeth. RESULTS Eighteen studies were included into the systematic review. The studies varied largely with regard to tooth type (molars, premolars), number of specimens (9-25), stump height (3-6mm), convergence angle (4.8-33 degrees ), standardization and measurement of preparation surface, seating force (25-200N), artificial ageing, crosshead speed for tensile force and statistical analysis. The coefficient of variation of the test results varied from 3% to 100%. The most important influencing factors for the crown dislodgement were stump height and convergence angle as well as the luting agent. Panavia and RelyX Unicem generally produced the highest values followed by glass ionomer and zinc phosphate cements. When pooling and normalizing the data, the mean difference between glass ionomer and resin-based materials as well as between glass ionomer and zinc phosphate cements was statistically significant (Wilcoxon, p<0.05). Seating force, roughness, type of cutting bur and use of a desensitizing agent had all a negligible effect on the test results. Artificial ageing like thermocycling had no influence with glass ionomer cements whereas for resin-based cements thermocycling and prolonged water storage generated similar a failures stress than thermocycling alone. The comparison with clinical results did not reveal conclusive evidence that the results of the laboratory methods completely reflect the results of prospective clinical trials in conjunction with single crowns and fixed dental prostheses. A reasonable experimental setup includes: at least 20 specimens per group, stump height 3mm, convergence angle 20 degrees , thermocycling of specimens (5000x), avoidance of shearing forces during dislodgement and failure probability statistics (Weibull). CONCLUSIONS The results of pull-off tests with crowns that are cemented with luting agents varied largely and reflect only partially the results from clinical trials. The most influencing factors (standardized tooth preparation, avoidance of shearing stress during dislodgement of crown) had to be controlled to get meaningful results.

Correlation of wear in vivo and six laboratory wear methods.

OBJECTIVE We examined the correlation between clinical wear rates of restorative materials and enamel (TRAC Research Foundation, Provo, USA) and the results of six laboratory test methods (ACTA, Alabama (generalized, localized), Ivoclar (vertical, volumetric), Munich, OHSU (abrasion, attrition), Zurich). METHODS Individual clinical wear data were available from clinical trials that were conducted by TRAC Research Foundation (formerly CRA) together with general practitioners. For each of the n=28 materials (21 composite resins for intra-coronal restorations [20 direct and 1 indirect], 5 resin materials for crowns, 1 amalgam, enamel) a minimum of 30 restorations had been placed in posterior teeth, mainly molars. The recall intervals were up to 5 years with the majority of materials (n=27) being monitored, however, only for up to 2 years. For the laboratory data, the databases MEDLINE and IADR abstracts were searched for wear data on materials which were also clinically tested by TRAC Research Foundation. Only those data for which the same test parameters (e.g. number of cycles, loading force, type of antagonist) had been published were included in the study. A different quantity of data was available for each laboratory method: Ivoclar (n=22), Zurich (n=20), Alabama (n=17), OHSU and ACTA (n=12), Munich (n=7). The clinical results were summed up in an index and a linear mixed model was fitted to the log wear measurements including the following factors: material, time (0.5, 1, 2 and 3 years), tooth (premolar/molar) and gender (male/female) as fixed effects, and patient as random effect. Relative ranks were created for each material and method; the same was performed with the clinical results. RESULTS The mean age of the subjects was 40 (±12) years. The materials had been mostly applied in molars (81%) and 95% of the intracoronal restorations were Class II restorations. The mean number of individual wear data per material was 25 (range 14-42). The mean coefficient of variation of clinical wear data was 53%. The only significant correlation was reached by OHSU (abrasion) with a Spearman r of 0.86 (p=0.001). Zurich, ACTA, Alabama generalized wear and Ivoclar (volume) had correlation coefficients between 0.3 and 0.4. For Zurich, Alabama generalized wear and Munich, the correlation coefficient improved if only composites for direct use were taken into consideration. The combination of different laboratory methods did not significantly improve the correlation. SIGNIFICANCE The clinical wear of composite resins is mainly dependent on differences between patients and less on the differences between materials. Laboratory methods to test conventional resins for wear are therefore less important, especially since most of them do not reflect the clinical wear.

Clinical effectiveness of direct anterior restorations—A meta-analysis

OBJECTIVES This is the first meta-analysis on the efficacy of composite resin restorations in anterior teeth. The objective of the present meta-analysis was to verify whether specific material classes, tooth conditioning methods and operational procedures influence the result for Class III and Class IV restorations. MATERIAL AND METHODS The database SCOPUS and PubMed were searched for clinical trials on anterior resin composites without restricting the search to the year of publication. The inclusion criteria were: (1) prospective clinical trial with at least 2 years of observation; (2) minimal number of restorations at last recall=20; (3) report on drop-out rate; (4) report of operative technique and materials used in the trial, and (5) utilization of Ryge or modified Ryge evaluation criteria. For the statistical analysis, a linear mixed model was used with random effects to account for the heterogeneity between the studies. p-Values smaller than 0.05 were considered to be significant. RESULTS Of the 84 clinical trials, 21 studies met the inclusion criteria, 14 of them for Class III restorations, 6 for Class IV restorations and 1 for closure of diastemata; the latter was included in the Class IV group. Twelve of the 21 studies started before 1991 and 18 before 2001. The estimated median overall success rate (without replacement) after 10 years for Class III composite resin restorations was 95% and for Class IV restorations 90%. The main reason for the replacement of Class IV restorations was bulk fractures, which occurred significantly more frequently with microfilled composites than with hybrid and macrofilled composites. Caries adjacent to restorations was infrequent in most studies and accounted only for about 2.5% of all replaced restorations after 10 years irrespective of the cavity class. Class III restorations with glass ionomer derivates suffered significantly more loss of anatomical form than did fillings with other types of material. When the enamel was acid-etched and no bonding agent was applied, significantly more restorations showed marginal staining and detectable margins compared to enamel etching with enamel bonding or the total etch technique; fillings with self-etching systems were in between of these two outcome variables. Bevelling of the enamel was associated with a significantly reduced deterioration of the anatomical form compared to no bevelling but not with less marginal staining or less detectable margins. The type of isolation (absolute/relative) had a statistically significant influence on marginal caries which, however, might be a random finding.

Correlation between microtensile bond strength data and clinical outcome of Class V restorations

OBJECTIVE To determine if the results of resin-dentin microtensile bond strength (μTBS) is correlated with the outcome parameters of clinical studies on non-retentive Class V restorations. METHODS Resin-dentin μTBS data were obtained from one test center; the in vitro tests were all performed by the same operator. The μTBS testing was performed 8 h after bonding and after 6 months of storing the specimens in water. Pre-test failures (PTFs) of specimens were included in the analysis, attributing them a value of 1MPa. Prospective clinical studies on cervical restorations (Class V) with an observation period of at least 18 months were searched in the literature. The clinical outcome variables were retention loss, marginal discoloration and marginal integrity. Furthermore, an index was formulated to be better able to compare the laboratory and clinical results. Estimates of adhesive effects in a linear mixed model were used to summarize the clinical performance of each adhesive between 12 and 36 months. Spearman correlations between these clinical performances and the μTBS values were calculated subsequently. RESULTS Thirty-six clinical studies with 15 adhesive/restorative systems for which μTBS data were also available were included in the statistical analysis. In general 3-step and 2-step etch-and-rinse systems showed higher bond strength values than the 2-step/3-step self-etching systems, which, however, produced higher values than the 1-step self-etching and the resin modified glass ionomer systems. Prolonged water storage of specimens resulted in a significant decrease of the mean bond strength values in 5 adhesive systems (Wilcoxon, p<0.05). There was a significant correlation between μTBS values both after 8 h and 6 months of storage and marginal discoloration (r=0.54 and r=0.67, respectively). However, the same correlation was not found between μTBS values and the retention rate, clinical index or marginal integrity. SIGNIFICANCE As μTBS data of adhesive systems, especially after water storage for 6 months, showed a good correlation with marginal discoloration in short-term clinical Class V restorations, longitudinal clinical trials should explore whether early marginal staining is predictive for future retention loss in non-carious cervical restorations.