Sílvia A. Moreira

Preservation under pressure (hyperbaric storage) at 25°C, 30°C and 37°C of a highly perishable dairy food and comparison with refrigeration

Hyperbaric storage (HS) under mild pressure of requeijão, a traditional Portuguese whey cheese, as a case study of a highly perishable dairy food, was evaluated as a possible energy costless alternative to refrigeration. Whey cheese was stored for 4 and 8 hours, at different pressure levels (0.1, 100 and 150 MPa) and temperatures (25°C, 30°C and 37°C), and the results were compared with refrigeration (4°C). Microbial analyses showed that storage for 4 hours at 100 MPa was able to maintain microbial counts similar to refrigeration and initial load, ≈3 Log10 CFU/g, at all tested temperatures. By increasing the pressure to 150 MPa and the storage time to 8 hours, microbial loads were reduced to undetectable counts, with the exception for total aerobic mesophiles that were reduced to about ≈1 Log unit. HS in general maintained pH, water activity and lipid oxidation values, at levels similar to that in refrigeration.

A first study comparing preservation of a ready-to-eat soup under pressure (hyperbaric storage) at 25°C and 30°C with refrigeration.

Abstract Hyperbaric storage (HS), storage under pressure at 25°C and 30°C, of a ready‐to‐eat (RTE) soup was studied and compared with refrigeration. Soup was stored at different time (4 and 8 h), temperature (4°C, 25°C, and 30°C), and pressure (0.1, 100, and 150 MPa) conditions, to compare microbial loads and physicochemical parameters. HS resulted in similar (microbial growth inhibition) to better (microbial inactivation) results compared to refrigeration, leading to equal and lower microbial loads, respectively, at the end of storage. Lower/higher pressure (100 vs. 150 MPa) and shorter/longer storage times (4 vs. 8 h) resulted in more pronounced microbial growth inhibition/microbial inactivation. Aerobic mesophiles showed less susceptibility to HS, compared to Enterobacteriaceae and yeast and molds. HS maintained generally the physicochemical parameters at values similar to refrigeration. Thus, HS with no need for temperature control throughout storage and so basically energetically costless, is a potential alternative to refrigeration.

Comparison of Emerging Technologies to Extract High-Added Value Compounds from Fruit Residues: Pressure- and Electro-Based Technologies

Fruit consumption has significantly increased due to their attractive sensory properties and the growing recognition of its nutritional and therapeutic values. Nevertheless, several tons of fruits are processed by the food industry for the production of different products such as juices and jams, leading to the production of a great amount of fruit waste. Until a few decades ago, fruit residues were not considered a cost neither a benefit but resulted in a significant negative impact on the environment, ending up being used as animal feed, brought to landfills or sent to composting sites. The extraction of high-added value compounds from fruit residues is usually done through conventional methods, such as Soxhlet, hydrodistillation, maceration, and enzyme-assisted extraction. Although these methods are easy to perform and cheap to operate, they present several concerns mainly due to thermo-sensible compound degradation and environment pollution. Recently, new extraction technologies have been in development to improve extraction of high-value compounds, such as high pressure, pressurized liquid extraction, instantly controlled pressure drop, pulse electric fields, and high-voltage electrical discharges, as well its combinations between each other’s. These technologies are considered environmentally friendly, allow the use of lower amounts of organic solvents and the reduction in extraction time and energetic consumption, conducting to higher yields and high-quality final extracts.

Pulsed Electric Field Processing of Fruit Juices

Abstract Fruit juices and other liquid foods constitute an important source of bioactive compounds. However, the techniques used for their processing may cause alterations in their contents, and consequently they do not provide the benefits expected by the consumer. This fact has led to the increasing use of nonthermal processing technologies, such as pulsed electric field (PEF), which have been developed over recent decades as alternative technologies to thermal pasteurization of liquid foods. Researchers have previously studied the effects of PEF on the main compounds affecting the quality and the health-related properties. The reported results show that PEF could be used to pasteurize fruit juices with minimal modifications of the physicochemical and nutritional properties, or even a significantly higher amount of health-related phytochemicals.

Emerging technologies to extract high added value compounds from fruit residues: Sub/supercritical, ultrasound-, and enzyme-assisted extractions

ABSTRACT Food waste is a growing problem for the food industry, leading to an increase of pollution and economic problems. Fruits and vegetables are very rich in bioactive compounds having many benefits for humans. These biocompounds can be found not only in the fruit/vegetable itself but also in its wastes, after processing. Nonetheless, the conventional extraction methods are highly problematic, due to solvent consumption, long extraction time, and low extraction yields, making it necessary to develop new extraction techniques. In this review, we aim to review the most recent literature on the extraction of bioactive compounds from fruit peels and seeds, using sub/supercritical fluids, ultrasound, and enzymes.

Impact of different hyperbaric storage conditions on microbial, physicochemical and enzymatic parameters of watermelon juice

Hyperbaric storage (HS) of raw watermelon juice, up to 10days at 50, 75, and 100MPa at variable/uncontrolled room temperature (18-23°C, RT) was studied and compared with storage at atmospheric pressure (AP) under refrigeration (4°C, RF) and RT, being evaluated microbiological (endogenous and inoculated), physicochemical parameters, and enzymatic activities. Ten days of storage at 50MPa resulted in a microbial growth evolution similar to RF, while at 75/100MPa were observed microbial load reductions on endogenous and inoculated microorganisms (Escherichia coli and Listeria innocua, whose counts were reduced to below the detection limit of 1.00 log CFU/mL), resulting in a shelf-life extension compared to RF. The physicochemical parameters remained stable at 75MPa when compared to the initial raw juice, except for browning degree that increased 1.72-fold, whilst at 100MPa were observed higher colour variations, attributed to a lycopene content decrease (25%), as well as reductions on peroxidase residual activity (16.8%) after 10days, while both polyphenol oxidase and pectin methylesterase residual activities were similar to RF. These outcomes hint HS as a reliable alternative to RF as a new food preservation methodology, allowing energy savings and shelf-life extension of food products. This is the first paper studying the effect of HS on inoculated microorganisms and on a broad number of physicochemical parameters and on endogenous enzymatic activities, for a preservation length surpassing the shelf-life by RF.

Effect of emergent non-thermal extraction technologies on bioactive individual compounds profile from different plant materials

Extraction is the first step for isolation and purification of interesting bioactive compounds, by mixing of the plant material with an adequate solvent. Those bioactive compounds are, usually, secondary metabolites, such as phenolic acids and flavonoids which are present in closed insoluble structures, making its extraction a challenge. There are many different traditional extraction methods, such as Soxhlet, heat reflux, and maceration. Nevertheless, due to several disadvantages, they are being replaced by new methods, using emergent technologies, such as high hydrostatic pressure, ultrasounds, pulsed electric fields, and supercritical fluids. The use of novel technologies allows enhancing mass transfer rates, increasing cell permeability as well as increasing secondary metabolite diffusion, leading to higher extraction yields, fewer impurities on the final extract, extractions at room temperature with thermo-sensitive structures preservation, use of different non-organic solvents, low energy consumption, short operation time, and have no significant or lower effect on the structure of bioactive compounds. This paper aims to review the effect of the main emergent extraction technologies (high hydrostatic pressure, pulsed electric fields, ultrasounds, and supercritical fluid assisted) on the individual profile of bioactive compounds from plant material.

Interaction of Compounds

Abstract Modern consumers look for functional food products to achieve well-being, preferring natural products, rather than overprocessed ones. New processing technologies have emerged as alternatives to conventional heat treatments with promising results in food development and production. They allow microbiologically safe food products to be obtained while maintaining the food products’ nutritional and sensorial properties. However, the interactions between food compounds (e.g., proteins, carbohydrates, or lipids) promoted by these technologies are still poorly known and require further research. Technologies such as high-pressure processing, pulsed electric field, high-pressure homogenization, cold plasma, ultrasound, and ohmic heating and their effects on food compound interaction are discussed in this chapter.