Simon Gross

Fifty percent internal slope efficiency femtosecond direct-written Tm³⁺:ZBLAN waveguide laser.

We report a 790 nm pumped, Tm³⁺ doped ZBLAN glass buried waveguide laser that produces 47 mW at 1880 nm, with a 50% internal slope efficiency and an M² of 1.7. The waveguide cladding is defined by two overlapping rings created by femtosecond direct-writing of the glass, which results in the formation of a tubular depressed-index-cladding structure, and the laser resonator is defined by external dielectric mirrors. This is, to the best of our knowledge, the most efficient laser created in a glass host via femtosecond waveguide writing.

Starlight demonstration of the Dragonfly instrument: an integrated photonic pupil-remapping interferometer for high-contrast imaging

In the two decades since the first extra-solar planet was discovered, the detection and characterization of extra-solar planets has become one of the key endeavours in all of modern science. Recently, direct detection techniques such as interferometry or coronagraphy have received growing attention because they reveal the population of exoplanets inaccessible to Doppler or transit techniques, and moreover they allow the faint signal from the planet itself to be investigated. Next-generation stellar interferometers are increasingly incorporating photonic technologies due to the increase in fidelity of the data generated. Here, we report the design, construction and commissioning of a new high-contrast imager, the integrated pupil-remapping interferometer, an instrument we expect will find application in the detection of young faint companions in the nearest star-forming regions. The laboratory characterization of the instrument demonstrated high-visibility fringes on all interferometer baselines in addition to stable closure phase signals. We also report the first successful on-sky experiments with the prototype instrument at the 3.9-m Anglo-Australian Telescope. Performance metrics recovered were consistent with ideal device behaviour after accounting for expected levels of decoherence and signal loss from the uncompensated seeing. The prospect of complete Fourier coverage coupled with the current performance metrics means that this photonically enhanced instrument is well positioned to contribute to the science of high-contrast companions.

Laser written circuits for quantum photonics

The femtosecond laser direct-writing (FLDW) of waveguide circuits in glasses has seen interest from a number of fields over the previous 20 years. It has evolved from a curiosity to a viable platform for the rapid prototyping of small scale circuits. The field of quantum information science has exploited this capability and in the process advanced the fabrication technique. In this review the technological aspects of the laser inscription method relevant to quantum information science will be discussed. A range of demonstrations which have been enabled by laser written circuits will be outlined; these include novel circuits, simulations, photon sources and detection. This places the FLDW technique among the few integrated optical platforms to have produced individually every component required for scalable quantum computation.

Femtosecond direct-written integrated mode couplers.

We report the design and fabrication of three-dimensional integrated mode couplers operating in the C-band. These mode-selective couplers were inscribed into a boro-aluminosilicate photonic chip using the femtosecond laser direct-write technique. Horizontally and vertically written two-core couplers are shown to allow for the multiplexing of the LP11a and LP11b spatial modes of an optical fiber, respectively, with excellent mode extinction ratios (25-37 + dB) and low loss (~1 dB) between 1500 and 1580 nm. Furthermore, optimized fabrication parameters enable coupling ratios close to 100%. When written in sequence, the couplers allow for the multiplexing of all LP01, LP11a and LP11b modes. This is also shown to be possible using a single 3-dimensional three-core coupler. These integrated mode couplers have considerable potential to be used in mode-division multiplexing for increasing optical fiber capacity. The three-dimensional capability of the femtosecond direct-write technique provides the versatility to write linear cascades of such two- and three-core couplers into a single compact glass chip, with arbitrary routing of waveguides to ensure a small footprint. This technology could be used for high-performance, compact and cost-effective multiplexing of large numbers of modes of an optical fiber.

Integrated photonic building blocks for next-generation astronomical instrumentation II: the multimode to single mode transition

There are numerous advantages to exploiting diffraction-limited instrumentation at astronomical observatories, which include smaller footprints, less mechanical and thermal instabilities and high levels of performance. To realize such instrumentation it is imperative to convert the atmospheric seeing-limited signal that is captured by the telescope into a diffraction-limited signal. This process can be achieved photonically by using a mode reformatting device known as a photonic lantern that performs a multimode to single-mode transition. With the aim of developing an optimized integrated photonic lantern, we undertook a systematic parameter scan of devices fabricated by the femtosecond laser direct-write technique. The devices were designed for operation around 1.55 μm. The devices showed (coupling and transition) losses of less than 5% for F/# ≥ 12 injection and the total device throughput (including substrate absorption) as high as 75-80%. Such devices show great promise for future use in astronomy.

Non-classical interference in integrated 3D multiports

We demonstrate three and four input multiports in a three dimensional glass platform, fabricated using the femtosecond laser direct-write technique. Hong-Ou-Mandel (HOM) interference is observed and a full quantum characterization is performed, obtaining two photon correlation matrices for all combinations of input and output ports. For the 3-port case, the quantum visibilities are accurately predicted solely from measurement of the classical coupling ratios.

2.1 μm waveguide laser fabricated by femtosecond laser direct-writing in Ho3+, Tm3+:ZBLAN glass.

We report the first Ho3+ doped waveguide laser, which was realized by femtosecond direct-writing of a depressed cladding structure into ZBLAN glass. Tm3+ sensitizing allows the 9 mm long Ho3+ gain medium to be conveniently pumped at 790 nm, achieving an optical-to-optical slope efficiency of 20% and a threshold of 20 mW. The potentially widely tunable laser produces up to 76 mW at 2052 nm and also operates at shorter wavelengths near 1880 nm and 1978 nm for certain cavity configurations.

Versatile large-mode-area femtosecond laserwritten Tm:ZBLAN glass chip lasers

We report performance characteristics of a thulium doped ZBLAN waveguide laser that supports the largest fundamental modes reported in a rare-earth doped planar waveguide laser (to the best of our knowledge). The high mode quality of waveguides up to 45 um diameter (~1075 μm(2) mode-field area) is validated by a measured beam quality of M(2)~1.1 ± 0.1. Benefits of these large mode-areas are demonstrated by achieving 1.9 kW peak-power output Q-switched pulses. The 1.89 μm free-running cw laser produces 205 mW and achieves a 67% internal slope efficiency corresponding to a quantum efficiency of 161%. The 9 mm long planar chip developed for concept demonstration is rapidly fabricated by single-step optical processing, contains 15 depressed-cladding waveguides, and can operate in semi-monolithic or external cavity laser configurations.

Multiband processing of multimode light: combining 3D photonic lanterns with waveguide Bragg gratings

The first demonstration of narrowband spectral filtering of multimode light on a 3D integrated photonic chip using photonic lanterns and waveguide Bragg gratings is reported. The photonic lanterns with multi-notch waveguide Bragg gratings were fabricated using the femtosecond direct-write technique in boro-aluminosilicate glass (Corning, Eagle 2000). Transmission dips of up to 5 dB were measured in both photonic lanterns and reference single-mode waveguides with 10.4-mm-long gratings. The result demonstrates efficient and symmetrical performance of each of the gratings in the photonic lantern. Such devices will be beneficial to space-division multiplexed communication systems as well as for units for astronomical instrumentation for suppression of the atmospheric telluric emission from OH lines.

Low loss mid-infrared ZBLAN waveguides for future astronomical applications

Photonic technologies will be at the heart of future terrestrial planet hunting interferometers. In particular the mid-infrared spectral region between 3.5 - 4.2 μm is the ideal window for hunting for young extra-solar planets, since the planet is still hot from its formation and thus offers a favorable contrast with respect to the parent star compared to other spectral regions. This paper demonstrates two basic photonic building blocks of such an instrument, namely single-mode waveguides with propagation losses as low as 0.29±0.03 dB/cm at a wavelength of 4 μm as well as directional couplers with a constant splitting ratio across a broad wavelength band of 500 nm. The devices are based on depressed cladding waveguides inscribed into ZBLAN glass using the femtosecond laser direct-write technique. This demonstration is the first stepping stone towards the realization of a high transmission mid-infrared nulling interferometer.