Simon Thelen

Diagnostic accuracy of neutrophil‐derived circulating free DNA (cf‐DNA/NETs) for septic arthritis

The release of “neutrophil extracellular traps” (NETs) has been identified as a novel immune response in innate immunity. NETs are composed of neutrophil‐derived circulating free DNA (cf‐DNA) and neutrophil cytoplasm‐derived proteins such as proteases. In this study, we analyzed the putative diagnostic value of synovial cf‐DNA/NETs for identification of septic arthritis. Forty‐two patients with a joint effusion who had undergone arthrocentesis were included. From synovial fluid, cf‐DNA/NETs (j‐cf‐DNA) levels were directly quantified. Diagnostic value of j‐cf‐DNA was compared with white blood cells (WBC), synovial white blood cells (j‐WBC), C‐reactive protein (CRP), j‐IL‐6, j‐TNF alpha, j‐IL‐1 beta, and myeloperoxidase (j‐MPO). Sensitivity, specificity, positive and negative predictive value, as well as ROC‐curves for each parameter were calculated. Synovial fluid cf‐DNA/NETs values from patients with septic arthritis (3,286 ± 386 ng/ml, n = 9) were significantly increased compared to patients with noninfectious joint inflammation (1,040 ± 208 ng/ml, n = 17) or osteoarthritis (278 ± 34 ng/ml, n = 16, p < 0.01). In conjunction with j‐cf‐DNA, j‐IL‐6 and j‐IL‐1 beta were significantly elevated (p < 0.01), but WBC, CRP, and j‐WBC were not. At a cut‐off of 300 ng/ml, j‐cf‐DNA had a sensitivity of 0.89, a specificity of 1.0, a positive predictive value of 1.0, and a negative predictive value of 0.97. Receiver operation curves revealed largest areas under the curve for cf‐DNA/NETs (0.933) and j‐IL‐6 (0.951). cf‐DNA/NETs seem to be a valuable additional marker for the diagnosis of septic arthritis or periprosthetic infections. However, this result should be confirmed in a large clinical trial.

Biomechanical cadaver testing of a fixed-angle plate in comparison to tension wiring and screw fixation in transverse patella fractures.

INTRODUCTION Operative treatment of patella fractures is frequently associated with implant failure and secondary dislocation which can be attributed to the employed hardware. Therefore, a 2.7 mm fixed-angle plate designed for the treatment of patella fractures was tested biomechanically against the currently preferred methods of fixation. It was hypothesized that under simulated cyclic loading fixed-angle plating would be superior to modified anterior tension wiring or cannulated lag screws with anterior tension wiring. MATERIALS AND METHODS Eighteen human cadaver knees, matched by bone mineral density and age, were divided into three groups of six. After setting a transverse patella fracture each group received one of the osteosyntheses mentioned above. Repetitive testing over 100 cycles was performed at non-destructive loads by simulating knee motion from 90° flexion to full extension. RESULTS Anterior tension wiring as well as lag screws with tension wiring showed significant fracture displacement after the initial cycle already. Both constructs, lag screws plus wiring (3.7 ± 2.7 mm) as well as tension wiring alone (7.1 ± 2.2 mm) displayed fracture displacement of >2 mm which is clinically regarded as failure. Those patellae stabilized with fixed-angle plates showed no significant fracture gap widening after completion of 100 cycles (0.7 ± 0.5 mm). The differences between the fixed-angle plate group and the other two groups were statistically significant (p<0.05). CONCLUSION In contrast to modified anterior tension wiring and cannulated lag screws with anterior tension wiring the bilateral fixed-angle plate was the only fixation device to stabilize transverse patella fractures securely and sustainably.

Fixed-angle plate osteosynthesis of the patella - an alternative to tension wiring?

BACKGROUND The goal of this study is carry out a biomechanical evaluation of the stability of a bilateral, polyaxial, fixed-angle 2.7 mm plate system specifically designed for use on the patella. The results of this approach are then compared to the two currently most commonly used surgical techniques for patella fractures: modified anterior tension wiring with K-wires and cannulated lag screws with anterior tension wiring. METHODS A transient biomechanical analysis determining material failure points of all osteosyntheses were conducted on 21 identical left polyurethane foam patellae, which were osteotomized horizontally. Evaluated were load (N), displacement (mm) and run-time (s) as well as elastic modulus (MPa), tensile strength (MPa) and strain at failure (%). FINDINGS With a maximum load capacity of 2396 (SD 492) N, the fixed-angle plate proved to be significantly stronger than the cannulated lag screws with anterior tension wiring (1015 (SD 246) N) and the modified anterior tension wiring (625 (SD 84.9) N). The fixed-angle plate displayed significantly greater stiffness and lower fracture gap dehiscence than the other osteosyntheses. Additionally, osteosynthesis deformation was found to be lower for the fixed-angle plate. INTERPRETATION A bilateral fixed-angle plate was the most rigid and stable osteosynthesis for horizontal patella fractures with the least amount of fracture gap dehiscence. Further biomechanical trials performed under cycling loading with fresh cadaver specimen should be done to figure out if a fixed-angle plate may be an alternative in the surgical treatment of patella fractures.

Influence of foot positions on the spine and pelvis.

The management of knee osteoarthritis includes the use of wedged shoe insoles to unload the affected knee compartment. Although the biomechanical effects of shoe insoles on the knee joint are known and described, only little is known about their influence on the pelvis and spine. Therefore, the purpose of this study was to evaluate the effects of different foot positions, such as how they could be achieved by shoe insoles, on pelvic position and spinal posture.

The early phase influence of bone marrow concentrate on metaphyseal bone healing

Bone marrow concentrate (BMC) contains high densities of progenitor cells. Therefore, in critical size defects BMC may have the potency to support bone healing. The aim of this study was to investigate the effect of BMC in combination with calcium phosphate granules (CPG) on bone defect healing in a metaphyseal long bone defect in mini-pigs. A metaphyseal critical-size bone defect at the proximal tibia of 24 mini-pigs was filled with CPG combined with BMC, CPG solely (control group) or with an autograft. Radiological and histomorphometrical evaluations after 6 weeks (42 days) showed significantly more bone formation in the BMC group in the central area of the defect zone and the cortical defect zone compared to the CPG group. At the same time the resorption rate of CPG increased significantly in the BMC group. Nevertheless, compared to the BMC group the autograft group showed a significantly higher new bone formation radiologically and histomorphometrically. In BMC the count of mononuclear cells was significantly higher compared to the bone marrow aspirate (3.5-fold). The mesenchymal progenitor cell characteristics of the cells in BMC were confirmed by flow cytometry. Cells from BMC created significantly larger colonies of alkaline phosphatase-positive colony forming units (CFU-ALP) (4.4-fold) compared to cells from bone marrow aspirate. Nevertheless, even in the BMC group complete osseous bridging was only detectable in isolated instances of the bone defects. Within the limitations of this study the BMC+CPG composite promotes bone regeneration in the early phase of bone healing significantly better than the isolated application of CPG. However, the addition of BMC does not lead to a solid fusion of the defect in the early phase of bone healing an still does not represent an equal alternative to autologous bone.

The Role of Erythropoietin and Bone Marrow Concentrate in the Treatment of Osteochondral Defects in Mini-Pigs

Background All available treatment options for osteochondral and chondral defects do not restore hyaline cartilage and are limited to decreasing associated pain, and maintaining or improving joint function. The purpose of this study was to evaluate the potential of erythropoietin (EPO) in combination with bone marrow aspiration concentrate (BMAC) in the treatment of osteochondral defects of mini-pigs. Methods 14 Goettinger mini-pigs, in which a 6×10 mm osteochondral defect in the medial femoral condyle of both knee joints was created, were randomized into four groups: biphasic scaffold alone, scaffold with EPO, scaffold with BMAC and scaffold in combination with EPO and BMAC. After 26 weeks all animals were euthanized and histological slides were evaluated using a modified ÓDriscoll Score. Results In the therapy groups, areas of chondrogenic tissue that contained collagen II were present. Adding EPO (p = 0.245) or BMAC (p = 0.099) alone to the scaffold led to a non-significant increase in the score compared to the control group. However, the combination of EPO and BMAC in the implanted scaffold showed a significant improvement (p = 0.02) in the histological score. Conclusion The results of our study show that in mini-pigs, the combination of EPO and BMAC leads to an enhanced osteochondral healing. However, additional research is necessary to further improve the repair tissue and to define the role of MSCs and EPO in cartilage repair.

Fixed-angle plates in patella fractures - a pilot cadaver study

ObjectiveModified anterior tension wiring with K-wires and cannulated lag screws with anterior tension wiring are currently the fixation of choice for patellar fractures. Failure of fixation, migration of the wires, postoperative pain and resulting revision surgery, however, are not uncommon. After preliminary biomechanical testing of a new fixed-angle plate system especially designed for fixation of patella fractures the aim of this study was to evaluate the surgical and anatomical feasibility of implanting such a plate-device at the human patella.MethodsIn six fresh unfixed female cadavers without history of previous fractures around the knee (average age 88.8 years) a bilateral fixed-angle plate fixation of the patella was carried out after previous placement of a transverse central osteotomy. Operative time, intra-operative problems, degree of retropatellar arthritis (following Outerbridge), quality of reduction and existence of any intraarticular screw placement have been raised. In addition, lateral and anteroposterior radiographs of all specimens were made.ResultsDue to the high average age of 88.8 years no patella showed an unimpaired retropatellar articular surface and all were severely osteoporotic, which made a secure fixation of the reduction forceps during surgery difficult. The operation time averaged 49 minutes (range: 36-65). Although in postoperative X-rays the fracture gap between the fragments was still visible, the analysis of the retropatellar surface showed no residual articular step or dehiscence > 0.5 mm. Also in a total of 24 inserted screws not one intraarticular malposition was found. No intraoperative complications were noticed.ConclusionsOsteosynthesis of a medial third patella fracture with a bilateral fixed-angle plate-device is surgically and anatomically feasible without difficulties. Further studies have to depict whether the bilateral fixed-angle plate-osteosynthesis of the patella displays advantages over the established operative procedures.

The dynamics of proximal femoral nails: a clinical comparison between PFNA and Targon PF.

The objective of this study comparing the proximal femoral nails Targon PF (Aesculap, Tuttlingen, Germany) and Proximal Femoral Nail Antirotation (PFNA; Synthes. Oberdorf, Switzerland) was to observe the complications and postoperative results following pertrochanteric femoral fracture fixation, with special attention devoted to the dynamic properties of both implants under physiological load in vivo. The survey was designed as a randomized, prospective study of 80 patients who had sustained a pertrochanteric femoral fracture (AO type 31.A2). Postoperative radiological and clinical examinations were conducted over a period of 12 months on 40 respective patients treated with a PFNA or a Targon PF nail. Average operative time was 66.2 minutes and average fluoroscopy time was 103.6 seconds in the PFNA group, which was significantly lower than in the Targon PF group (84.7 minutes and 164.5 seconds, respectively). No significant difference was found between the 2 groups in terms of range of motion (P=.26) or Harris Hip Score (P=.83). The femoral neck components of the Targon PF showed a significantly higher sliding ability (14.5 mm; P=.04) than the PFNA (11.1 mm).Both implants are suited to treat pertrochanteric femoral fractures and display comparable clinical results. The Targon PF demonstrates better dynamic properties than the PFNA under physiological load in vivo. A disadvantage of the Targon PF, however, is the more complicated surgical technique and the longer operative time.

The rasterstereographic–dynamic analysis of posture in adolescents using a modified Matthiass test

The Matthiass posture test is a clinical test to detect posture changes in children and adolescents. Aim of this study was to objectify this test using a dynamic rasterstereographic measuring device. We examined 31 healthy athletes during a modified Matthiass test with a dynamic rasterstereographic measuring system. Hereby the trunk inclination, kyphosis and lordosis angle were measured. The trunk inclination decreased by about 50% of the basic value just by raising the arms. Additional weight loads of only 5% body weight (bw) resulted in significant changes of the posture (lordosis and kyphosis angle) during this test. With this rasterstereographic measuring device it seems to be possible to determine spinal posture changes under dynamic conditions. The results suggest that additional weights of 5% bw during the Matthias-test are enough to create significant deviations in posture parameters, even in healthy subjects.

Fixation of multifragmentary patella fractures using a bilateral fixed-angle plate.

This biomechanical study is the first to compare 3 fixation methods-bilateral fixed-angle plate, modified anterior tension wiring, and cannulated lag screws with anterior tension wiring-in multifragmentary distal patella fractures. A T-shaped 3-part fracture simulating a multifragmentary articular distal patella fracture (AO/OTA 34-C2.2) was created in 18 human cadaver knee specimens. Three groups were created using homogenous ages and bone mineral densities based on the fixation method received. Repetitive testing over 100 cycles was performed by moving the knee against gravity from 90° flexion to full extension. Failure was defined as fracture displacement greater than 2 mm. In all patellae using fixed-angle plates, an anatomical fracture reduction could be maintained throughout cyclic testing, whereas anterior tension wiring and lag screws with tension wiring showed significant fracture displacement after 100 cycles, with mean fracture gaps of 2.0±1.3 and 1.9±1.6 mm, respectively. The differences in fracture gaps between the fixed-angle plate group and the other 2 groups were statistically significant. In both groups using tension wiring, half of the constructs (3 of 6 in each group) failed due to a fracture displacement greater than 2 mm. The bilateral fixed-angle plate was the only fixation method that sustainably stabilized a multifragmentary articular distal patella fracture during cyclic loading when compared with modified anterior tension wiring and cannulated lag screws with anterior tension wiring.