Simone Taioli

On the angular dependence of L x-ray production cross sections following photoionization at an energy of 59.54 keV

The anisotropy of L x-ray fluorescence induced by 59.54 keV unpolarized photons is investigated by means of an experimental procedure which allows the relative L x-ray production cross section to be evaluated without taking account of the angular set-up and the instrumental efficiency. Thick targets of Yb, Hf, Ta, W and Pb are considered, and the angular trend of the relative experimental ratios, IL?/IL?, is calculated by simple evaluations of the peak area alone. Within the experimental uncertainties, which are found to be of the order of 1.6% in the worst cases, the results do not show any significant angular dependence of the L? emission lines if the isotropy of the L? lines is assumed. This fact contrasts with the results of some groups, which report evidence of strong angular dependence at this level of photon energy.

Epitaxy of Nanocrystalline Silicon Carbide on Si(111) at Room Temperature

Silicon carbide (SiC) has unique chemical, physical, and mechanical properties. A factor strongly limiting SiC-based technologies is the high-temperature synthesis. In this work, we provide unprecedented experimental and theoretical evidence of 3C-SiC epitaxy on silicon at room temperature by using a buckminsterfullerene (C(60)) supersonic beam. Chemical processes, such as C(60) rupture, are activated at a precursor kinetic energy of 30-35 eV, far from thermodynamic equilibrium. This result paves the way for SiC synthesis on polymers or plastics that cannot withstand high temperatures.

Computational study of graphene growth on copper by first-principles and kinetic Monte Carlo calculations

In this work the growth of a graphene monolayer on copper substrate, as typically achieved via chemical vapor deposition of propene (C3H6), was investigated by first-principles and kinetic Monte Carlo calculations. A comparison between calculated C1s core-level binding energies and electron spectroscopy measurements showed that graphene nucleates from isolated carbon atoms adsorbed on surface defects or sub-superficial layers upon hydrocarbon fragmentation. In this respect, ab initio nudged elastic band simulations yield the energetic barriers characterizing the diffusion of elemental carbon on the Cu(111) surface and atomic carbon uptake by the growing graphene film. Our calculations highlight a strong interaction between the growing film edges and the copper substrate, indicative of the importance of the grain boundaries in the epitaxy process. Furthermore, we used activation energies to compute the reaction rates for the different mechanisms occurring at the carbon–copper interface via harmonic transition state theory. Finally, we simulated the long-time system growth evolution through a kinetic Monte Carlo approach for different temperatures and coverage. Our ab initio and Monte Carlo simulations of the out-of-equilibrium system point towards a growth model strikingly different from that of standard film growth. Graphene growth on copper turns out to be a catalytic, thermally-activated process that nucleates from carbon monomers, proceeds by adsorption of carbon atoms, and is not self-limiting. Furthermore, graphene growth seems to be more effective at carbon supersaturation of the surface—a clear fingerprint of a large activation barrier for C attachment. Our growth model and computational results are in good agreement with recent X-ray photoelectron spectroscopy experimental measurements.

A Quantum Chemical Interpretation of Two-Dimensional Electronic Spectroscopy of Light-Harvesting Complexes

Nonlinear electronic spectroscopies represent one of the most powerful techniques to study complex multichromophoric architectures. For these systems, in fact, linear spectra are too congested to be used to disentangle the many coupled vibroelectronic processes that are activated. By using a 2D approach, instead, a clear picture can be achieved, but only when the recorded spectra are combined with a proper interpretative model. So far, this has been almost always achieved through parametrized exciton Hamiltonians that necessarily introduce biases and/or arbitrary assumptions. In this study, a first-principles approach is presented that combines accurate quantum chemical descriptions with state-of-the-art models for the environment through the use of atomistic and polarizable embeddings. Slow and fast bath dynamics, along with exciton transport between the pigments, are included. This approach is applied to the 2DES spectroscopy of the Light-Harvesting 2 (LH2) complex of purple bacteria. Simulations are extended over the entire visible-near-infrared spectral region to cover both carotenoid and bacteriochlorophyll signals. Our results provide an accurate description of excitonic properties and relaxation pathways, and give an unprecedented insight into the interpretation of the spectral signatures of the measured 2D signals.

Non-adiabatic ab initio molecular dynamics of supersonic beam epitaxy of silicon carbide at room temperature

In this work, we investigate the processes leading to the room-temperature growth of silicon carbide thin films by supersonic molecular beam epitaxy technique. We present experimental data showing that the collision of fullerene on a silicon surface induces strong chemical-physical perturbations and, for sufficient velocity, disruption of molecular bonds, and cage breaking with formation of nanostructures with different stoichiometric character. We show that in these out-of-equilibrium conditions, it is necessary to go beyond the standard implementations of density functional theory, as ab initio methods based on the Born-Oppenheimer approximation fail to capture the excited-state dynamics. In particular, we analyse the Si-C(60) collision within the non-adiabatic nuclear dynamics framework, where stochastic hops occur between adiabatic surfaces calculated with time-dependent density functional theory. This theoretical description of the C(60) impact on the Si surface is in good agreement with our experimental findings.

Designing graphene based nanofoams with nonlinear auxetic and anisotropic mechanical properties under tension or compression

Abstract In this study, the analysis of the mechanical response of realistic fullerene-nanotube nanotruss networks with face-centered cubic geometry is performed by using molecular dynamics with reactive potentials. In particular, the mechanical properties of these novel architectures are investigated in both compressive and tensile regimes, a number of truss geometries by straining along different directions. Our atomistic simulations reveal a similar behavior under tensile stress for all the samples. Conversely, under compressive regimes the emergence of a response that depends on the orientation of load is observed together with a peculiar local instability. Due to this instability, some of these nanotruss networks present a negative Poisson ratio in compression, like re-entrant foams. Finally, the performance of these nanotruss networks is analyzed with regards to their use as impact energy absorbers, displaying properties that outperform materials traditionally used in these applications.

2D Material Armors Showing Superior Impact Strength of Few Layers

We study the ballistic properties of two-dimensional (2D) materials upon the hypervelocity impacts of C60 fullerene molecules combining ab initio density functional tight binding and finite element simulations. The critical penetration energy of monolayer membranes is determined using graphene and the 2D allotrope of boron nitride as case studies. Furthermore, the energy absorption scaling laws with a variable number of layers and interlayer spacing are investigated, for homogeneous or hybrid configurations (alternated stacking of graphene and boron nitride). At the nanolevel, a synergistic interaction between the layers emerges, not observed at the micro- and macro-scale for graphene armors. This size-scale transition in the impact behavior toward higher dimensional scales is rationalized in terms of scaling of the damaged volume and material strength. An optimal number of layers, between 5 and 10, emerges demonstrating that few-layered 2D material armors possess impact strength even higher than their monolayer counterparts. These results provide fundamental understanding for the design of ultralightweight multilayer armors using enhanced 2D material-based nanocomposites.

Lobachevsky crystallography made real through carbon pseudospheres.

We realize Lobachevsky geometry in a simulation lab, by producing a carbon-based energetically stable molecular structure, arranged in the shape of a Beltrami pseudosphere. We find that this structure: (i) corresponds to a non-Euclidean crystallographic group, namely a loxodromic subgroup of SL(2, Z); (ii) has an unavoidable singular boundary, that we fully take into account. Our approach, substantiated by extensive numerical simulations of Beltrami pseudospheres of different size, might be applied to other surfaces of constant negative Gaussian curvature, and points to a general procedure to generate them. Our results also pave the way to test certain scenarios of the physics of curved spacetimes owing to graphenes unique properties.

The Interaction of C60 on Si(111) 7 × 7 Studied by Supersonic Molecular Beams: Interplay between Precursor Kinetic Energy and Substrate Temperature in Surface Activated Processes

Buckminsterfullerene (C60) is a molecule fully formed of carbon that can be used, owing to its electronic and mechanical properties, as “clean” precursor for the growth of carbon-based materials, ranging from -conjugated systems (graphenes) to synthesized species, e.g. carbides such as silicon carbide (SiC). To this goal, C60 cage rupture is the main physical process that triggers material growth. Cage breaking can be obtained either thermally by heating up the substrate to high temperatures (630°C), after C60 physisorption, or kinetically by using Supersonic Molecular Beam Epitaxy (SuMBE) techniques. In this work, aiming at demonstrating the growth of SiC thin films by C60 supersonic beams, we present the experimental investigation of C60 impacts on Si(111) 7x7 kept at 500°C for translational kinetic energies ranging from 18 to 30 eV. The attained kinetically activated synthesis of SiC submonolayer films is probed by in-situ surface electron spectroscopies (XPS and UPS). Furthermore, in these experimental conditions the C60-Si(111) 7×7 collision has been studied by computer simulations based on a tight-binding approximation to Density Functional Theory, DFT. Our theoretical and experimental findings point towards a kinetically driven growth of SiC on Si, where C60 precursor kinetic energy plays a crucial role, while temperature is relevant only after cage rupture to enhance Si and carbon reactivity. In particular, we observe a counterintuitive effect in which for low kinetic energy (below 22 eV), C60 bounces back without breaking more effectively at high temperature due to energy transfer from excited phonons. At higher kinetic energy (22 < K < 30 eV), for which cage rupture occurs, temperature enhances reactivity without playing a major role in the cage break. These results are in good agreement with ab-initio molecular dynamics simulations. SuMBE is thus a technique able to drive materials growth at low temperature regime.

UV-Light-Induced Vibrational Coherences: The Key to Understand Kasha Rule Violation in trans-Azobenzene

We combine sub-20 fs transient absorption spectroscopy with state-of-the-art computations to study the ultrafast photoinduced dynamics of trans-azobenzene (AB). We are able to resolve the lifetime of the ππ* state, whose decay within ca. 50 fs is correlated to the buildup of the nπ* population and to the emergence of coherences in the dynamics, to date unobserved. Nonlinear spectroscopy simulations call for the CNN in-plane bendings as the active modes in the subps photoinduced coherent dynamics out of the ππ* state. Radiative to kinetic energy transfer into these modes drives the system to a high-energy planar nπ*/ground state conical intersection, inaccessible upon direct excitation of the nπ* state, that triggers an ultrafast (0.45 ps) nonproductive decay of the nπ* state and is thus responsible for the observed Kasha rule violation in UV excited trans-AB. On the other hand, cis-AB is built only after intramolecular vibrational energy redistribution and population of the NN torsional mode.