Siriporn Damrongsakkul

Influences of physical and chemical crosslinking techniques on electrospun type A and B gelatin fiber mats

This work has investigated the factors influencing the production of electrospun gelatin fibers including electrical potential and concentration of gelatin solution. Electrospun gelatin fibers were prepared from both type A and B gelatin solutions at the concentration of 2.5-60% w/v and 10-25 kV. Concentration of gelatin solution at 20-40% w/v was found to be the optimized range to produce the gelatin fibers with smooth surface throughout the fiber length. The electrical potential did not exhibit a dominant effect on the gelatin fibers obtained. Further study of the different crosslinking techniques for the gelatin fiber mats showed the various effects on the crosslinking degrees and fiber structure. Physical crosslinking such as dehydrothermal treatment, plasma treatment and their combination resulted in low crosslinking extent of gelatin fiber mats due to the crosslinking occurring only at the surface of the material. Combination of dehydrothermal and chemical crosslinking using 1-ethyl-3-(3-dimethylamino propyl) carbodiimide hydrochloride (EDC) or glutaraldehyde (GA) indicated higher crosslinking degree since both the surface and the bulk of the material were crosslinked. Spraying/immersion in EDC solution, a modified technique, resulted in swollen fibers while interconnected pores remained. Merged fibers were obtained from the crosslinking by GA vapor. We concluded that crosslinking is one of the key methods to control structure and degradation of the gelatin fiber mats. Various structures of gelatin fiber mats are expected to be useful for numerous applications.

The influence of molecular weight of chitosan on the physical and biological properties of collagen/chitosan scaffolds

Biopolymer blends between collagen and chitosan have the potential to produce cell scaffolds with biocompatible properties. However, the relationship between the molecular weight of chitosan and its effect on physical and biological properties of collagen/chitosan scaffolds has not been elucidated yet. Porous scaffolds were fabricated by freeze-drying the solution of collagen and chitosan, followed by cross-linking by dehydrothermal treatment. Various types of scaffolds were prepared using chitosan with various molecular weights and blending ratios. Fourier transform infrared spectroscopy proved that collagen and chitosan scaffolds at all blending ratios contained mainly electrostatic interactions at the molecular level. The compressive modulus decreased with increasing the concentration of chitosan. Equilibrium swelling ratios of approximately 6–8, determined in phosphate-buffered saline at physiological pH (7.4), were found in case of collagen-dominated scaffolds. The lysozyme biodegradation test demonstrated that the presence of chitosan, especially the high-molecular-weight species, could significantly prolong the biodegradation of collagen/chitosan scaffolds. In vitro culture of L929 mouse connective tissue fibroblast evidenced that low-molecular-weight chitosan was more effective to promote and accelerate cell proliferation, particularly for scaffolds containing 30 wt% chitosan. The results elucidated that the blends of collagen with low-molecular-weight chitosan have a high potential to be applied as new materials for skin-tissue engineering.

An innovative bi-layered wound dressing made of silk and gelatin for accelerated wound healing

In this study, the novel silk fibroin-based bi-layered wound dressing was developed. Wax-coated silk fibroin woven fabric was introduced as a non-adhesive layer while the sponge made of sericin and glutaraldehyde-crosslinked silk fibroin/gelatin was fabricated as a bioactive layer. Wax-coated silk fibroin fabrics showed improved mechanical properties compared with the non-coated fabrics, but less adhesive than the commercial wound dressing mesh. This confirmed by results of peel test on both the partial- and full-thickness wounds. The sericin-silk fibroin/gelatin spongy bioactive layers showed homogeneous porous structure and controllable biodegradation depending on the degree of crosslinking. The bi-layered wound dressings supported the attachment and proliferation of L929 mouse fibroblasts, particularly for the silk fibroin/gelatin ratio of 20/80 and 0.02% GA crosslinked. Furthermore, we proved that the bi-layered wound dressings promoted wound healing in full-thickness wounds, comparing with the clinically used wound dressing. The wounds treated with the bi-layered wound dressings showed the greater extent of wound size reduction, epithelialization, and collagen formation. The superior properties of the silk fibroin-based bi-layered wound dressings compared with those of the clinically used wound dressings were less adhesive and had improved biological functions to promote cell activities and wound healing. This novel bi-layered wound dressing should be a good candidate for the healing of full-thickness wounds.

Properties and antityrosinase activity of sericin from various extraction methods.

The present study investigated the chemical properties and antityrosinase activities of SS (silk sericin) extracted from different Thai silk strains via various extraction methods. Different silk strains contain distinct SS with various amino acid compositions, which are significantly influenced by the extraction method used. Urea extraction of SS was the only method that provided clearly distinguishable bands and had the most significant impact on SS conformation as illustrated by FTIR (Fourier‐transform infrared) spectra. The use of urea or either acidic or alkaline chemicals in the extraction process also influenced SS thermal behaviour. With regard to biological activity, SS extracted using urea exhibited the highest antityrosinase activity, whereas alkali‐degraded SS showed no inhibition of mushroom tyrosinase. Pigments, primarily flavonoids and carotenoids from silk cocoons, were also found to enhance tyrosinase inhibition of SS.

Preparation of Thai silk fibroin/gelatin electrospun fiber mats for controlled release applications

This work studied the effect of preparation conditions for electrospun fiber mats of Thai silk fibroin/type B gelatin (SF/GB) for controlled release applications. The increasing in applied voltage resulted in decreased average fiber size and narrow fiber size distribution. An increasing in silk fibroin content in blended solution resulted in larger size of the obtained electrospun fibers. Smooth fibers could be produced from SF/GB blended solution at weight blending ratios of 10/90, 20/80, 30/70, 40/60 and 50/50. The results on in vitro biodegradation test showed that SF/GB 10/90 electrospun fiber mat was rapidly degraded in collagenase solution due to direct biodegradation of gelatin by collagenase. From in vitro controlled release of two active agents (azo-casein and methylene blue) from SF/GB blended fiber mats, it was suggested that methylene blue could be adsorbed on the blended fiber mats, possibly due to attractive interaction of the positively charged molecules of methylene blue and negatively charged SF/GB fiber mats. In contrast, the same charge of blended fiber mats and azo-casein would result in the repulsive force, resulting in continuous diffusion of azo-casein from blended fiber mats within 72 h. The results indicated that SF/GB electrospun fiber mats had a high potential to be applied in controlled release applications.

A comparison of Thai silk fibroin-based and chitosan-based materials on in vitro biocompatibility for bone substitutes

The novel hybrid scaffolds fabricated from silk fibroin, gelatin, low deacetylation degree chitosan and hydroxyapatite were investigated for their in vitro biocompatibility and osteoconductivity to mouse pre-osteoblast cell line (MC3T3-E1) and rat bone marrow-derived stem cells (MSC). We found that gelatin-conjugated silk fibroin films and scaffolds dominantly promoted cell adhesion and proliferation. Film and scaffold prepared from gelatin-conjugated silk fibroin with hydroxyapatite grown crystals effectively enhanced osteogenic differentiation of both cell types, as evaluated by alkaline phosphatase activity and calcium content. However the blend of hydroxyapatite/low deacetylation degree chitosan hybrid materials did not support cell growth. Furthermore, the blended hydroxyapatite in the bulk scaffold was found to be less effective for osteogenic differentiation than the scaffold with hydroxyapatite grown crystals. The comparative study between MC3T3-E1 and MSC showed that both cell types had similar trend of proliferation and osteogenic differentiation on the same material. Also, higher proliferative rate of MC3T3-E1 than MSC was observed.

Improvement of early cell adhesion on Thai silk fibroin surface by low energy plasma.

Low energy plasma has been introduced to treat the surface of Thai silk fibroin which should be enhanced for cell adhesion due to its native hydrophobic surface. Plasma surface treatment could introduce desirable hydrophilic functionalities on the surface without using any chemicals. In this work, nitrogen glow discharge plasma was generated by a low energy AC50Hz power supply system. The plasma operating conditions were optimized to reach the highest nitrogen active species by using optical emission spectroscopy. X-ray photoelectron spectroscopy (XPS) revealed that amine, hydroxyl, ether, and carboxyl groups were induced on Thai silk fibroin surface after plasma treatment. The results on Fourier transform infrared attenuated total reflection (FTIR-ATR) spectroscopy confirmed that the plasma treated effects were only on the outermost layer since there was no change in the bulk chemistry. The surface topography was insignificantly changed from the detection with atomic force microscopy (AFM). The plasma-treated effects were the improved surface wettability and cell adhesion. After a 90-s treatment, the water contact angle was at 20°, while the untreated surface was at 70°. The early cell adhesion of L929 mouse fibroblast was accelerated. L929 cells only took 3h to reach 100% cell adhesion on 90 s N2 plasma-treated surface, while there was less than 50% cell adhesion on the untreated Thai silk fibroin surface after 6h of culture. The cell adhesion results were in agreement with the cytoskeleton development. L929 F-actin was more evident on 90 s N2 plasma-treated surface than others. It could be concluded that a lower energy AC50Hz plasma system enhanced early L929 mouse fibroblast adhesion on Thai silk fibroin surface without any significant change in surface topography and bulk chemistry.

Balanced electrostatic blending approach--an alternative to chemical crosslinking of Thai silk fibroin/gelatin scaffold.

In tissue engineering, chemical crosslinking is widely used for conjugating two or more biomaterials to mainly control biodegradability and strength. For example, Thai silk fibroin/gelatin scaffold will offer mechanical strength from Thai silk fibroin and cell attraction from gelatin. However, chemical crosslinking requires crosslinking agent which could potentially pose negative impact from remaining trace amount of chemicals especially in medical application. Here we present an alternative approach to chemical crosslinking-a balance electrostatic blending approach. In this approach, two opposite charge biomaterials were selected for blending, with different ratios. Both materials were bound together with electrostatic force. The maximum binding was achieved when mixture electric potential approaches zero. In this work, we compared this approach with traditionally chemical crosslinking in terms of physical appearance, binding effectiveness, mechanical strength (in dry/wet conditions), in vitro biodegradation, and cell proliferation. We found that 50/50 weight ratio of Thai silk fibroin/gelatin scaffold had almost comparable properties to chemical crosslinked scaffold. It has similar appearance, binding effectiveness, and affinity for cell proliferation. For mechanical properties, even this approach yields lower dry compressive modulus compared with chemical crosslinking. But in wet condition, the compressive modulus from both methods is similar. However, the biodegradation time of non-crosslinked scaffolds is slightly faster than that of chemical crosslinked ones. These results demonstrate that a balance electrostatic approach is an alternative approach to chemical crosslinking when there is a concern of remaining trace amount of crosslinking agent in medical application.

Development of electrospun beaded fibers from Thai silk fibroin and gelatin for controlled release application

Thai silk fibroin and gelatin are attractive biomaterials for tissue engineering and controlled release applications due to their biocompatibility, biodegradability, and bioactive properties. The development of electrospun fiber mats from silk fibroin and gelatin were reported previously. However, burst drug release from such fiber mats remained the problem. In this study, the formation of beads on the fibers aiming to be used for the sustained release of drug was of our interest. The beaded fiber mats were fabricated using electrospinning technique by controlling the solution concentration, weight blending ratio of Thai silk fibroin/gelatin blend, and applied voltage. It was found that the optimal conditions including the solution concentration and the weight blending ratio of Thai silk fibroin/gelatin at 8-10% (w/v) and 70/30, respectively, with the applied voltage at 18 kV provided the fibers with homogeneous formation of beads. Then, the beaded fiber mats obtained were crosslinked by the reaction of carbodiimide hydrochloride (EDC)/N-hydroxysuccinimide (NHS). Methylene blue as a model active compound was loaded on the fiber mats. The release test of methylene blue from the beaded fiber mats was carried out in comparison to that of the smooth fiber mats without beads. It was found that the beaded fiber mats could prolong the release of methylene blue, comparing to the smooth fiber mats without beads. This was possibly due to the beaded fiber mats that would absorb and retain higher amount of methylene blue than the fiber mats without beads. Thai silk fibroin/gelatin beaded fiber mats were established as an effective carrier for the controlled release applications.

Development of Collagen/Demineralized Bone Powder Scaffolds and Periosteum-Derived Cells for Bone Tissue Engineering Application

The aim of this study was to investigate physical and biological properties of collagen (COL) and demineralized bone powder (DBP) scaffolds for bone tissue engineering. DBP was prepared and divided into three groups, based on various particle sizes: 75–125 μm, 125–250 μm, and 250–500 μm. DBP was homogeneously mixed with type I collagen and three-dimensional scaffolds were constructed, applying chemical crosslinking and lyophilization. Upon culture with human periosteum-derived cells (PD cells), osteogenic differentiation of PD cells was investigated using alkaline phosphatase (ALP) activity and calcium assay kits. The physical properties of the COL/DBP scaffolds were obviously different from COL scaffolds, irrespective of the size of DBP. In addition, PD cells cultured with COL scaffolds showed significantly higher cell adhesion and proliferation than those with COL/DBP scaffolds. In contrast, COL/DBP scaffolds exhibited greater osteoinductive potential than COL scaffolds. The PD cells with COL/DBP scaffolds possessed higher ALP activity than those with COL scaffolds. PD cells cultured with COL/DBP scaffolds with 250–500 μm particle size yielded the maximum calcium deposition. In conclusion, PD cells cultured on the scaffolds could exhibit osteoinductive potential. The composite scaffold of COL/DBP with 250–500 μm particle size could be considered a potential bone tissue engineering implant.