Son-Jong Hwang

Metalloenzyme-like catalyzed isomerizations of sugars by Lewis acid zeolites

Isomerization of sugars is used in a variety of industrially relevant processes and in glycolysis. Here, we show that hydrophobic zeolite beta with framework tin or titanium Lewis acid centers isomerizes sugars, e.g., glucose, via reaction pathways that are analogous to those of metalloenzymes. Specifically, experimental and theoretical investigations reveal that glucose partitions into the zeolite in the pyranose form, ring opens to the acyclic form in the presence of the Lewis acid center, isomerizes into the acyclic form of fructose, and finally ring closes to yield the furanose product. The zeolite catalysts provide processing advantages over metalloenzymes such as an ability to work at higher temperatures and in acidic conditions that allow for the isomerization reaction to be coupled with other important conversions.

Magnesium borohydride: from hydrogen storage to magnesium battery.

Beyond hydrogen storage: The first example of reversible magnesium deposition/stripping onto/from an inorganic salt was seen for a magnesium borohydride electrolyte. High coulombic efficiency of up to 94 % was achieved in dimethoxyethane solvent. This Mg(BH(4))(2) electrolyte was utilized in a rechargeable magnesium battery.

Palladium Catalysts for Dehydrogenation of Ammonia Borane with Preferential B−H Activation

Cationic Pd(II) complexes catalyzed the dehydrogenation of ammonia borane in the most efficient manner with the release of 2.0 equiv of H(2) in less than 60 s at 25 degrees C. Most of the hydrogen atoms were obtained from the boron atom of the ammonia borane. The first step of the dehydrogenation reaction was elaborated using density functional theory calculations.

Ordered Silicon Vacancies in the Framework Structure of the Zeolite Catalyst SSZ-74

Physico-chemical characterization of the high-silica zeolite catalyst SSZ-74 (ref. 1) suggested that it, like the related materials TNU-9 (ref. 2) and IM-5 (ref. 3), has a multidimensional 10-ring channel system. Such pore systems are ideal for many petrochemical applications, and indeed SSZ-74 has been shown to be a good catalyst for a wide variety of reactions. The elucidation of its framework structure, however, proved to be difficult. Comparable problems were encountered with TNU-9 and IM-5, which were synthesized with related structure-directing agents. Their framework structures, which are the two most complex ones known, both have 24 Si atoms in the asymmetric unit, and were finally solved by combining high-resolution powder diffraction data with information derived from high-resolution electron microscopy images. Therefore, a similar approach, using the powder charge-flipping algorithm to combine the two types of data and molecular modelling to help to locate the structure-directing agent, was applied to SSZ-74. This procedure eventually revealed a most unusual 23-Si-atom framework structure (|(C(16)H(34)N(2))(4)&Si(92)(4)O(184)(OH)(8)]) with ordered Si vacancies.

Crystal Structure of Li2B12H12: a Possible Intermediate Species in the Decomposition of LiBH4

The crystal structure of solvent-free Li2B12H12 has been determined by powder X-ray diffraction and confirmed by a combination of neutron vibrational spectroscopy and first-principles calculations. This compound is a possible intermediate in the dehydrogenation of LiBH4, and its structural characterization is crucial for understanding the decomposition and regeneration of LiBH4. Our results reveal that the structure of Li2B12H12 differs from other known alkali-metal (K, Rb, and Cs) derivatives.

Synthesis and Characterization of a Lithium-Doped Fullerane (Lix-C60-Hy) for Reversible Hydrogen Storage

Herein, we present a lithium-doped fullerane (Li(x)-C(60)-H(y)) that is capable of reversibly storing hydrogen through chemisorption at elevated temperatures and pressures. This system is unique in that hydrogen is closely associated with lithium and carbon upon rehydrogenation of the material and that the weight percent of H(2) stored in the material is intimately linked to the stoichiometric ratio of Li:C(60) in the material. Characterization of the material (IR, Raman, UV-vis, XRD, LDI-TOF-MS, and NMR) indicates that a lithium-doped fullerane is formed upon rehydrogenation in which the active hydrogen storage material is similar to a hydrogenated fullerene. Under optimized conditions, a lithium-doped fullerane with a Li:C(60) mole ratio of 6:1 can reversibly desorb up to 5 wt % H(2) with an onset temperature of ~270 °C, which is significantly less than the desorption temperature of hydrogenated fullerenes (C(60)H(x)) and pure lithium hydride (decomposition temperature 500-600 and 670 °C respectively). However, our Li(x)-C(60)-H(y) system does not suffer from the same drawbacks as typical hydrogenated fullerenes (high desorption T and release of hydrocarbons) because the fullerene cage remains mostly intact and is only slightly modified during multiple hydrogen desorption/absorption cycles. We also observed a reversible phase transition of C(60) in the material from face-centered cubic to body-centered cubic at high levels of hydrogenation.

Diquaternary ammonium compounds in zeolite synthesis: cyclic and polycyclic N-heterocycles connected by methylene chains.

An additional dimension has been added to our long-standing studies in high silica zeolite synthesis via a guest/host synergism. We have created and studied the impact of making symmetric diquaternary ammonium compounds, by varying the chain length between nitrogen charge centers, and the heterocycle size and geometry containing the nitrogen. This allows the introduction of a second spatial parameter in the use of the charged organo-cation guest in the zeolite synthesis. The series of 15 diquaternary ammonium compounds (5 heterocycles synthesized onto chain lengths of C4-C6) were tested in a total of 135 zeolite syntheses reactions. Nine screening reactions were employed for each guest molecule, and the conditions built upon past successes in finding novel high silica zeolites via introduction of boron, aluminum, or germanium as substituting tetrahedral framework atoms for silicon. Eighteen different zeolite structures emerged from the studies. The use of specific chain lengths for derivatives of the pyrrolidine ring system produced novel zeolite materials SSZ-74 and 75.

Delamination of Layered Zeolite Precursors under Mild Conditions: Synthesis of UCB-1 via Fluoride/Chloride Anion-Promoted Exfoliation

New material UCB-1 is synthesized via the delamination of zeolite precursor MCM-22 (P) at pH 9 using an aqueous solution of cetyltrimethylammonium bromide, tetrabutylammonium fluoride, and tetrabutylammonium chloride at 353 K. Characterization by powder X-ray diffraction, transmission electron microscopy, and nitrogen physisorption at 77 K indicates the same degree of delamination in UCB-1 as previously reported for delaminated zeolite precursors, which require a pH of greater than 13.5 and sonication in order to achieve exfoliation. UCB-1 consists of a high degree of structural integrity via (29)Si MAS NMR and Fourier transform infrared spectroscopies, and no detectable formation of amorphous silica phase via transmission electron microscopy. Porosimetry measurements demonstrate a lack of hysteresis in the N(2) adsorption/desorption isotherms and macroporosity in UCB-1. The new method is generalizable to a variety of Si:Al ratios and leads to delaminated zeolite precursor materials lacking amorphization.

Pressure and temperature dependence of the decomposition pathway of LiBH4

The decomposition pathway is crucial for the applicability of LiBH(4) as a hydrogen storage material. We discuss and compare the different decomposition pathways of LiBH(4) according to the thermodynamic parameters and show the experimental ways to realize them. Two pathways, i.e. the direct decomposition into boron and the decomposition via Li(2)B(12)H(12), were realized under appropriate conditions, respectively. By applying a H(2) pressure of 50 bar at 873 K or 10 bar at 700 K, LiBH(4) is forced to decompose into Li(2)B(12)H(12). In a lower pressure range of 0.1 to 10 bar at 873 K and 800 K, the concurrence of both decomposition pathways is observed. Raman spectroscopy and (11)B MAS NMR measurements confirm the formation of an intermediate Li(2)B(12)H(12) phase (mostly Li(2)B(12)H(12) adducts, such as dimers or trimers) and amorphous boron.

Synthesis of ∗BEA-type molecular sieves using mesoporous materials as reagents

Abstract A new method for synthesizing ∗ BEA-type molecular sieves that involves the use of mesoporous materials as reagents is presented. Si-Beta (pure-silica, ∗ BEA-type molecular sieve) is synthesized by heating TEAOH-impregnated Si-MCM-41 to 150°C for several days. The Si-Beta obtained has a small number of Q 3 sites that are mostly siloxy groups that balance the charge of TEA cations. TEA cations can easily be removed by contacting the Si-Beta with acetic acid solution, and as a result, a highly hydrophobic Si-Beta is formed. Ti-Beta is synthesized from Ti-containing mesoporous silica or Ti-impregnated Si-MCM-41 without adding Al 3+ , alkali-metal cations and seeds. The incorporation of Ti into the ∗ BEA structure is confirmed by UV–vis data. ∗ BEA-type materials that contain other species such as Al, B, V, Zr and Zn can also be prepared.