Song Tu

Liquefaction of bamboo shoot shell for the production of polyols

Bamboo (Dendrocalamus latiflorus Munro) shoot shell (BSS) was liquefied in polyethylene glycol 400 (PEG400) and ethylene glycol (EG) catalyzed by sulfuric acid under atmospheric pressure. The effects of liquefaction conditions such as liquid-solid ratio, temperature, time, catalyst, solvents ratio, and material size on the liquefaction yield of BSS have been investigated. Methods including Elemental analysis, Thermogravimetric analysis, Fourier transform infrared spectroscopy, nuclear magnetic resonance and gas chromatography-mass spectrometry were selected to analyze the characteristics of products in three fractions: an aqueous fraction (AQ), an acetone-soluble fraction (AS) and a residue (RS), respectively. Results showed that the highest liquefaction percentage was 99.79% under the optimal conditions (liquid-solid ratio 6:1; temperature 150°C; reaction time 80min; raw size more than 40 mesh; catalyst mass percentage of solvent 4%; solvent volume ratio 3:1). Polyols could be obtained effectively by the liquefaction of BSS, an agricultural by-product.

Synthesis and fungicidal activities of novel indene-substituted oxime ether strobilurins

Nineteen novel indene-substituted oxime ether strobilurins, which used an indene group to stabilize the ( E)-styryl group in SYP-Z071 (an unsaturated oxime strobilurin fungicide under development by the Shenyang Research Institute of Chemical Industry), were designed and synthesized. The biological assay results showed that all compounds possessed good or excellent fungicidal activities. It was found that most of the compounds showed higher fungicidal activities against Pyricularia oryzae, Phytophthora infestans, Erysiphe graminis, and Colletotrichum lagenarium than SYP-Z071 at the tested concentration. The biological assay results also indicated that most of the compounds exhibited higher in vivo fungicidal activities against cucumber Pseudoperonospora cubensis and C. lagenarium than the commercial fungicides trifloxystrobin and kresoxim-methyl at a concentration of 6.25 mg/L. Furthermore, it was found that alpha-(methoxyimino)- N-methylphenylacetamide oxime ethers 6m- s exhibited a broad spectrum and remarkably higher activities against all tested fungi. Especially, the 6-methylindene-substituted compound 6p was identified as the most promising candidate for further study.

Surface-Enhanced Raman Scattering Active Plasmonic Nanoparticles with Ultrasmall Interior Nanogap for Multiplex Quantitative Detection and Cancer Cell Imaging

Due to its large enhancement effect, nanostructure-based surface-enhanced Raman scattering (SERS) technology had been widely applied for bioanalysis and cell imaging. However, most SERS nanostructures suffer from poor signal reproducibility, which hinders the application of SERS nanostructures in quantitative detection. We report an etching-assisted approach to synthesize SERS-active plasmonic nanoparticles with 1 nm interior nanogap for multiplex quantitative detection and cancer cell imaging. Raman dyes and methoxy poly(ethylene glycol) thiol (mPEG-SH) were attached to gold nanoparticles (AuNPs) to prepare gold cores. Next, Ag atoms were deposited on gold cores in the presence of Pluronic F127 to form a Ag shell. HAuCl4 was used to etch the Ag shell and form an interior nanogap in Au@AgAuNPs, leading to increased Raman intensity of dyes. SERS intensity distribution of Au@AgAuNPs was found to be more uniform than that of aggregated AuNPs. Finally, Au@AgAuNPs were used for multiplex quantitative detection and cancer cell imaging. With the advantages of simple and rapid preparation of Au@AgAuNPs with highly uniform, stable, and reproducible Raman intensity, the method reported here will widen the applications of SERS-active nanoparticles in diagnostics and imaging.

Synergetic Approach for Simple and Rapid Conjugation of Gold Nanoparticles with Oligonucleotides

Attaching thiolated DNA on gold nanoparticles (AuNPs) has been extremely important in nanobiotechnology because DNA-AuNPs combine the programmability and molecular recognition properties of the biopolymers with the optical, thermal, and catalytic properties of the inorganic nanomaterials. However, current standard protocols to attach thiolated DNA on AuNPs involve time-consuming, tedious steps and do not perform well for large AuNPs, thereby greatly restricting applications of DNA-AuNPs. Here we demonstrate a rapid and facile strategy to attach thiolated DNA on AuNPs based on the excellent stabilization effect of mPEG-SH on AuNPs. AuNPs are first protected by mPEG-SH in the presence of Tween 20, which results in excellent stability of AuNPs in high ionic strength environments and extreme pHs. A high concentration of NaCl can be applied to the mixture of DNA and AuNP directly, allowing highly efficient DNA attachment to the AuNP surface by minimizing electrostatic repulsion. The entire DNA loading process can be completed in 1.5 h with only a few simple steps. DNA-loaded AuNPs are stable for more than 2 weeks at room temperature, and they can precisely hybridize with the complementary sequence, which was applied to prepare core-satellite nanostructures. Moreover, cytotoxicity assay confirmed that the DNA-AuNPs synthesized by this method exhibit lower cytotoxicity than those prepared by current standard methods. The proposed method provides a new way to stabilize AuNPs for rapid and facile loading thiolated DNA on AuNPs and will find wide applications in many areas requiring DNA-AuNPs, including diagnosis, therapy, and imaging.

Investigation to biodiesel production by the two-step homogeneous base-catalyzed transesterification

For the two-step transesterification biodiesel production made from the sunflower oil, based on the kinetics model of the homogeneous base-catalyzed transesterification and the liquid-liquid phase equilibrium of the transesterification product, the total methanol/oil mole ratio, the total reaction time, and the split ratios of methanol and reaction time between the two reactors in the stage of the two-step reaction are determined quantitatively. In consideration of the transesterification intermediate product, both the traditional distillation separation process and the improved separation process of the two-step reaction product are investigated in detail by means of the rigorous process simulation. In comparison with the traditional distillation process, the improved separation process of the two-step reaction product has distinct advantage in the energy duty and equipment requirement due to replacement of the costly methanol-biodiesel distillation column.

Simple and Rapid Functionalization of Gold Nanorods with Oligonucleotides Using an mPEG-SH/Tween 20-Assisted Approach

DNA conjugated gold nanorods (AuNRs) are widely applied for nanostructure assembly, gene therapy, biosensing, and drug delivery. However, it is still a great challenge to attach thiolated DNA on AuNRs, because the positively charged AuNRs readily aggregate in the presence of negatively charged DNA. This article reports an mPEG-SH/Tween 20-assisted method to load thiolated DNA on AuNRs in 1 h. Tween 20 and mPEG-SH are used to synergistically displace CTAB on the surface of AuNRs by repeated centrifugation and resuspension, and thiolated DNA are attached to AuNRs in the presence of 1 M NaCl, 100 mM MgCl2, or 100 mM citrate. AuNRs with different sizes and aspect ratios can be functionalized with DNA by this method. The number of DNA loaded on each AuNR can be easily controlled by the concentrations of mPEG-SH and Tween 20 or the ratio between DNA and AuNR. Functionalized AuNRs were used for nanoparticle assembly and cancer cell imaging to confirm that DNA anchored on the surface of AuNRs retains its hybridization and molecular recognition capability. The new method is easy, rapid, and robust for the preparation of DNA functionalized AuNRs for a variety of applications such as cancer therapy, drug delivery, self-assembly, and imaging.

Design, Synthesis, and Biological Activity of Oxime Ether Strobilurin Derivatives Containing Indole Moiety as Novel Fungicide

Twenty‐one novel oxime ether strobilurins containing indole moiety, which employed an indole group to stabilize the E‐styryl group in Enoxastrobin, were designed and synthesized. The biological assay indicated that most compounds exhibited potent fungicidal activities. The structure–activity relationship study demonstrated that the synthesized methyl 3‐methoxypropenoate oxime ethers 7b–e exhibited remarkably high activities among all the synthesized oxime ether compounds 7. Moreover, the fungicidal activities of methyl α‐(methoxyimino)benzeneacetate oxime ethers compounds 7f–i and N‐methoxy‐carbamic acid methyl esters compounds 7j–m showed significant differences compared to the corresponding products of ammonolysis.

Design, synthesis and structure-activity relationship of novel oxime ether strobilurin derivatives containing substituted benzofurans.

BACKGROUND Strobilurins are one of the most important classes of agricultural fungicides. To discover new strobilurin analogues with broad spectrum and high activity, a series of novel oxime ether strobilurin derivatives containing substituted benzofurans in the side chain were synthesised and bioassayed. RESULTS The synthesised compounds were characterised by (1) H NMR, (13) C NMR, MS and HRMS. Bioassays demonstrated that most target compounds possessed good or excellent fungicidal activities, especially against Erysiphe graminis and Pyricularia oryzae. Furthermore, methyl 3-methoxypropenoate oxime ethers exhibited remarkably higher activities against E. graminis, Colletotrichum lagenarium and Puccinia sorghi Schw. Notably, (E,E)-methyl 3-methoxy-2-{2-[({[5-fluoro-1-(benzofuran-2-yl)ethylidene]amino}oxy)methyl]phenyl}propenoate (BSF2) and (E,E)-methyl 3-methoxy-2-{2-[({[5-chloro-1-(benzofuran-2-yl)ethylidene]amino}oxy)methyl]phenyl}propenoate (BSF3) were identified as the most promising candidates for further study. CONCLUSION The present work demonstrates that oxime ether strobilurin derivatives containing benzofurans can be used as possible lead compounds for developing novel fungicides.

DNA‐Mediated Morphological Control of Silver Nanoparticles

It is demonstrated that DNA can be used to control the synthesis of silver nanoplates with different morphologies using spherical silver seeds. UV-vis spectroscopy, transmission electron microscopy, scanning electron microscopy, X-ray photoelectron spectroscopy, and Raman spectroscopy are used to characterize the synthesized nanoparticles. Silver nanoprisms are encoded by poly C and poly G, while silver flower bouquets and silver nanodiscs are synthesized using poly A and poly T, respectively. The length of DNA is found to have little effect on the morphology of silver nanoparticles. Moreover, the synthesized silver nanoplates are found to have high surface enhanced Raman scattering enhancement ability, good antibacterial activity, and good biocompatibility. These discoveries will broaden the application of DNA in nanoscience and will provide a new platform to investigate the interaction between DNA sequences and silver nanoparticles.

Synthesis and fungicidal activities of novel benzothiophene-substituted oxime ether strobilurins.

Twenty-one novel benzothiophene-substituted oxime ether strobilurins, which employed a benzothiophene group to stabilise the E-styryl group in Enoxastrobin (an unsaturated oxime strobilurin fungicide developed by Shenyang Research Institute of Chemical Industry, China) were designed and synthesised. The biological assay indicated that most compounds exhibited good or excellent fungicidal activities, especially against Colletotrichum lagenarium and Puccinia sorghi Schw. In addition, methyl 3-methoxypropenoate oxime ethers and N-methoxy-carbamic acid methyl esters exhibited good in vivo fungicidal activities against Erysiphe graminis, Colletotrichum lagenarium and Puccinia sorghi Schw. under the tested concentrations. Notably, (E,E)-methyl 3-methoxy-2-(2-((((6-chloro-1-(1H-benzo[b]thien-2-yl)ethylidene)amino)oxy)methyl)phenyl)propenoate (5E) exhibited more potent in vivo fungicidal activities against nearly all of the tested fungi at a concentration of 0.39 mg/L compared to Enoxastrobin.