Soon Moon Jeong

Color Manipulation of Mechanoluminescence from Stress‐Activated Composite Films

The prospective application of luminescence to imaging devices is shown using a combination of color-tunable and patternable mechanoluminescent materials. A white light source is demonstrated by using an alternative color tuning method, induced under high vibration conditions. As the implementation is fairly straightforward, it is expected that the present results will find a number of potential uses in current industrial applications.

Bright, wind-driven white mechanoluminescence from zinc sulphide microparticles embedded in a polydimethylsiloxane elastomer

A variety of mechanoluminescent (ML) materials have recently reinvigorated studies of luminescence activated by mechanical stress, but few practical applications have been demonstrated due to the destructive nature of the process. To overcome these shortcomings, elastico-mechanoluminescent (elastico-ML) materials, which generate luminescence under elastic deformation, have been suggested with a view to their use in practical devices. However, the weak brightness and limited white colour expression of these materials must be resolved before they can be employed in practical applications. Here, we report a wind-driven ML device that produces significant brightness and emits warm/neutral/cool white light over a range of colour temperatures from zinc sulphide (ZnS) microscopic particles embedded in a polydimethylsiloxane (PDMS) composite. Harnessing wind-activated mechanoluminescent devices in practical displays or lighting systems could pave the way to new environmentally friendly lights, which reduce energy waste and promote sustainability.

High performance, transparent a-IGZO TFTs on a flexible thin glass substrate

We investigated electrical properties of transparent amorphous indium gallium zinc oxide (a-IGZO) thin-film transistors (TFTs) with amorphous indium zinc oxide (a-IZO) transparent electrodes on a flexble thin glass substrate. The TFTs show a high field-effect mobility, a good subthreshold slope and a high on/off ratio owing to the high temperature thermal annealing process which cannot be applied to typical transparent polymer-based flexible substrates. Bias stress instability tests applying tensile stress concurrently with the bending radius of up to 40 mm indicated that mechanically and electrically stable a-IGZO TFTs can be fabricated on the transparent thin glass substrate.

High-resolution electrohydrodynamic inkjet printing of stretchable metal oxide semiconductor transistors with high performance

As demands for high pixel densities and wearable forms of displays increase, high-resolution printing technologies to achieve high performance transistors beyond current amorphous silicon levels and to allow low-temperature solution processability for plastic substrates have been explored as key processes in emerging flexible electronics. This study describes electrohydrodynamic inkjet (e-jet) technology for direct printing of oxide semiconductor thin film transistors (TFTs) with high resolution (minimum line width: 2 μm) and superb performance, including high mobility (∼230 cm2 V-1 s-1). Logic operations of the amplifier circuits composed of these e-jet-printed metal oxide semiconductor (MOS) TFTs demonstrate their high performance. Printed In2O TFTs with e-jet printing-assisted high-resolution S/D electrodes were prepared, and the direct printing of passivation layers on these channels enhanced their gate-bias stabilities significantly. Moreover, low process temperatures (<250 °C) enable the use of thin plastic substrates; highly flexible and stretchable TFT arrays have been demonstrated, suggesting promise for next-generation printed electronics.

Enhanced blue photoluminescence realized by copper diffusion doping of ZnO thin films

ZnO thin films with blue photoluminescence (PL) have been fabricated through Cu diffusion doping. A CuOx-ZnO mixture, and Cu/ZnO double layer, films were prepared on amorphous SiOx/Si substrates by pulsed laser deposition (PLD), and electron beam (e-beam) deposition, respectively. After sequential oxygen annealing, CuOx-ZnO mixture films exhibited green emission centered at 523 nm. However, Cu/ZnO double layer films differed in producing a blue emission centered at 480 nm. Detailed analysis identified that this blue shift in the emission center resulted from increased blue emissions attributed to Cu dopants in the film by e-beam deposition. Luminescence intensity was increased to 6 cd/m2 for a sample annealed at 700 °C. Color points were close to the locus of points following the line of a black-body-radiator on the CIE 1931 XY chromaticity diagram. The present results show that Cu-doped ZnO has strong potential as a cost effective phosphor for use in down converting LEDs.

Luminance enhancement of electroluminescent devices using highly dielectric UV-curable polymer and oxide nanoparticle composite

A flexible hybrid structure electroluminescent (HSEL) device was fabricated from ZnS:Cu phosphor microparticles dispersed in a UV-curable polymer matrix. We observed a maximum luminance of 111 cd/m2 at 10 kHz and 170 V from a device wherein the mixing ratio between the phosphor particles and highly dielectric polymer binder was 70:30 wt%. Furthermore, by uniformly dispersing highly dielectric BaTiO3 nanoparticles within the polymer matrix, we were able to obtain a luminance of up to 211 cd/m2 in the HSEL device. Compared to the conventional thermal curing process, this UV process greatly simplifies the fabrication steps by combining phosphors and dielectric materials at room temperature. This process also demonstrates a promising pathway toward creating flexible and printed EL devices in the future.

Coherent Raman Imaging of Live Muscle Sarcomeres Assisted by SFG Microscopy

In this study, we used spectrally focused coherent anti-Stokes Raman scattering (spCARS) microscopy assisted by sum-frequency generation (SFG) to monitor the variations in the structural morphology and molecular vibrations of a live muscle of Caenorhabditis elegans. The subunits of the muscle sarcomeres, such as the M-line, myosin, dense body, and α-actinin, were alternatively observed using spCARS microscopy for different sample orientations, with the guidance of a myosin positional marker captured by SFG microscopy. Interestingly enough, the beam polarization dependence of the spCARS contrasts for two parallel subunits (dense body and myosin) showed a ~90° phase difference. The chemically sensitive spCARS spectra induced by the time-varying overlap of two pulses allowed (after a robust subtraction of the non-resonant background using a modified Kramers–Krönig transformation method) high-fidelity detection of various genetically modified muscle sarcomeres tuned to the C-H vibration (2800–3100 cm−1). Conversely, SFG image mapping assisted by phase-retrieved spCARS spectra also facilitated label-free monitoring of the changes in the muscle content of C. elegans that are associated with aging, based on the hypothesis that the C-H vibrational modes could serve as qualitative chemical markers sensitive to the amount and/or structural modulation of the muscle.

Conductive, flexible transparent electrodes based on mechanically rubbed nonconductive polymer containing silver nanowires

This paper explores the use of rubbing for alleviating the problem of lost electrical conductivity, which is typically caused by the use of nonconductive polymers, to improve the substrate adhesion and surface roughness of metal nanowire networks. This process is used to create composite transparent electrodes based on a network of silver nanowires (AgNWs) fully-embedded in PVA, which, after mechanical rubbing, exhibit both a smoother surface and superior electromechanical stability.

Novel Gated-Multiprobe Method for Measuring a Back Electrode Effect in Amorphous Oxide-Based Thin-Film Transistors

In this paper, we investigated the variations in electrical characteristics of amorphous indium-gallium-zinc-oxide thin-film transistors using a gated-multiprobe method when additional probe electrodes are on the back-channel region. We found that the resistance of the probe region is much smaller than that of the nonprobe region, which can be modeled by a series connection of transistors and resistors indicating that the probe region is independent of VGS and induces a decrease in effective channel length. We also performed technology computer aided design (TCAD) simulations and found that the effective channel length decreases and drain current increases, which is consistent with the experiments.

Bidirectional two colored light emission from stress-activated ZnS-microparticles-embedded polydimethylsiloxane elastomer films

Bidirectional two-colored mechanoluminescent light emission has been demonstrated by unifying two polydimethylsiloxane elastomer layers functionalized with zinc sulfide doped with Cu (ZnS:Cu) or Cu and Mn (ZnS:Cu,Mn). The bilayered composite films are simply fabricated by dispensing uncured ZnS:Cu,Mn + PDMS onto previously spin-coated and hardened ZnS:Cu + PDMS film. The robust PDMS-PDMS bonding yields a film which can simultaneously emit light with color coordinates of (0.25, 0.56) and (0.50, 0.48), similar to the intrinsic colors of ZnS:Cu and ZnS:Cu,Mn, respectively. Composite films can emit light in upper and lower directions without fracture when it is stretched.