Sorin Enache

Considerations regarding dynamic regimes of reluctance synchronous motors

A Matlab-Simulink model for the reluctance synchronous motor is presented in this paper. The synchronous machine equations written in the two axes theory are the starting point. A series of simulations emphasizing some parameters effects on the motor behaviour in dynamic regime have been carried out with the help of this model. A test bench for reluctance synchronous motors is presented further on. The connection schemes corresponding to the steady state and dynamic regimes are detailed. The acquisition program, specially designed and conceived, is also presented. The paper closes with a few suggestive experimental results and conclusions.

Aspects regarding optimal design of high power squirrel cage asynchronous motors

The lately important development of some high precision electrical drives with great response speed, as well as the fact that the electrical machines exploitation is closer and closer to limit of stability have led to intense preoccupations, in the whole world and in our country, for the precise determination of the asynchronous motors parameters and the operation characteristics. This paper has got a novelty character, emphasizes the role of the electromagnetic stresses and the constructive dimensions in the total cost optimization for high power asynchronous motors; it is based on the utilization of the modern numerical methods and the afferent software. There have been performed significant simulations, which bring quantitative and qualitative information necessary for finding the final optimum solution, by considering the customers restrictive conditions regarding the machine gauge. The optimization study has been done by the minimum total cost criterion, by considering twelve variables: A - the current sheet; B - the air gap magnetic induction; J1, J2b, J2i - the current densities into the stator winding, rotor winding and the short-circuit ring; Bj1, Bj2 - the magnetic inductions in the stator and rotor yoke; D - the machine diameter; δ - the air gap; βc1, βc2, βi - the form factors for the stator slot, the rotor slot and the short-circuit ring. The optimization advantages are emphasized by the simultaneous presentation of the three variants of motors: Vm - the existing variant of motor; Vo - the optimum variant; Vd - the unfavourable variant (which has the maximum total cost). The total cost of the optimized motor decreased with 12,2% in comparison to the existing motor (designed by using the known method) and with 27,5% in comparison to the unfavourable variant. Since there are many such motors in use it appears that the saving is significant.

Improvement of pre-determination precision of operation characteristics for asynchronous motor by considering magnetic saturation

The decisive elements establishing the technical and economic success of a constructive solution of an asynchronous motor are the answer characteristics in dynamic regime, the energy consumption, the gauge dimensions, the speed range, the answer time, the noise level, and a final aspect, important in equal extent, is the cost price. All these performances can be performed with the help of the electronic computer on the basis of some adequate programs, leading to an economic fabrication and utilization of the driving electrical equipment fitted out with asynchronous motors.

Modeling and Simulation of Magnetic Saturation in Induction Motors

It is proved that for different combinations of currents and flux linkages as state variables, there is a common theoretical support that simplifies the obtaining of the mathematical models of the saturated induction machine. Three models are compared: the exact one that introduce the cross- inductance Ldq , the classic one and simplified one for the simulation of the speed reversal process. For Ldq ne ct. and random, the exact method appears compulsory.

Aspects Regarding Dynamic Regimes of Induction Motors Control by the Stator Flux

In this paper there are presented the equations defining the mathematical model of the saturated induction machine when considering the magnetising current and the stator flux as state variables. By their means there is analysed the influence of the induction motors parameters upon the transient states duration of the converter-motor assembly when controlling by the stator flux with the implementation of a voltage inverter that is commanded in current.

Aspects Regarding Simulation of the Saturated Induction Motors Control by the Voltage Inverter Commanded in Current

In this paper there is analysed the influence of the induction motors parameters on the transient states duration of the converter-motor assembly when controlling by the stator flux with the implementation of a current controlled inverter. The mathematical model of the saturated induction machine when considering the magnetising current and the stator flux as state variables has been used in this purpose. A Matlab program for the simulation of the analyzed system operation has been carried out with its help. Then the simulations have been confirmed experimentally.

Prediction through simulation of the optimal behavior of the induction machine in complex process

In this paper one uses the theory developed by A.Campeanu (1995) to simulate the operation of induction machine in complex dynamic processes. On this basis one can determine in detail the transient behavior of induction machine and some of the factors which condition the operation. The results are useful in the design stage of induction machine which has to operate in prescribed complex dynamic regimes.

Considerations Regarding Determination of the Induction Motors Parameters

In this paper there is presented a new method for the determination of the induction machine parameters with the help of the data acquired in the no-load starting case. Is detailed the computation method, grounded with the help of the mathematical model in the two axes theory and of the optimisation algorithm SIMPLEX, the connexion schema, the experimental results and the conclusions.

Influence of Cross- Saturation for Modeling and Simulation of the Dynamic Processes in the Induction Motor

In this paper there are obtained mathematical models of the saturated induction machines. It is shown that various sets of state variables have a common theoretical background that simplifies the deduction of the saturated models. The possible combinations of the state variables are grouped in two classes for which are established direct calculus algorithms. (1) The winding currents -flux linkages as state variables. (2) The magnetizing current im -currents (flux linkages) of the windings as state variables. Specific computations are performed and there are written the state equations of the electromagnetic processes for several combinations of the state variables. The major aim of the numerical approach is to compare the computational programs. The simulation results points out that in the presence of saturation the simplified models do not reveal in a correct way the complete evolution of the dynamic electromechanical processes. The dynamic variation of the saturation (Ldqne0) essentially justifies the forced electromechanical oscillations.

Method and device of synchronization for determination of squirrel cage asynchronous motors parameters

This paper presents a method for the squirrel cage asynchronous motors parameters determination, which is the object of a invention proposal. The method involves monitoring a direct-on-line starting and processing, by minimizing an objective function, the data recorded during starting. There are also presented the experimental results obtained, with accent on the synchronization device, which is the object of an invention demand, too.