Soshan Cheong

Ultrafast Growth of Highly Branched Palladium Nanostructures for Catalysis

Palladium is widely used as a catalyst in pharmaceutical and chemical syntheses as well as in the reduction of harmful exhaust emissions. Therefore, the development of high performance palladium catalysts is an area of major concern. In this paper, we present the synthesis of highly branched palladium nanostructures in a simple solution phase reaction at room temperature. By varying the nature of the organic stabilizer system we demonstrate control over the reaction kinetics and hence the shape of the nanostructures. Investigations into the structural evolution of the nanostructures show that they form from multiply twinned face centered cubic (fcc) nanoparticle nuclei. Reaction kinetics then determine the resulting shape where ultrafast growth is shown to lead to the highly branched nanostructures. These results will contribute greatly to the understanding of complex nanoparticle growth from all fcc metals. The nanostructures then show excellent catalytic activity for the hydrogenation of nitrobenzene to aniline.

In Situ and Ex Situ Studies of Platinum Nanocrystals: Growth and Evolution in Solution

In situ studies on the growth and evolution of platinum nanocrystals in solution were carried out using synchrotron-based X-ray diffraction (XRD) techniques. Ex situ low- and high-resolution transmission electron microscopy (TEM) were used to investigate the nanocrystal morphologies through the different growth stages. In a reaction with low precursor concentration, both XRD and TEM results show that growth occurs at a relatively slow rate and yields faceted morphologies, which are characteristic of a thermodynamically controlled regime. In contrast, the platinum nanocrystals in the high-concentration reaction form branched structures and grow at much greater rates under a kinetically controlled regime. Additionally the growth mechanism of the high-concentration reaction involves a morphology transformation from octapod-like shapes to porous nanostructures, which is brought about by a novel mechanism involving selective growth and etching processes that occur simultaneously and at comparable rates.

Simple synthesis and functionalization of iron nanoparticles for magnetic resonance imaging.

Magnetic nanoparticles (NPs) are increasingly important in many biomedical applications, such as drug delivery, hyperthermia, and magnetic resonance imaging (MRI) contrast enhancement. For MRI, iron oxide NPs are the only commercial T2 or negative contrast agents, due to their biocompatibility and ease of synthesis and research in the area is highly active. The efficacy of these contrast agents depends mainly on the surface chemistry and magnetic properties of the NPs. Materials with larger magnetization could induce more efficient transverse (T2) relaxation of protons and result in greater contrast enhancement. As iron has the highest saturation magnetization at room temperature among all elements, and is biocompatible, it is an ideal candidate for MRI contrast enhancement. Nevertheless, the development of using iron NPs for magnetic applications has been challenging and limited compared to those of its oxides, due to the difficulty in preparing stable iron NPs with simple synthesis methods and precursors. 6] Under ambient conditions, iron NPs of 8 nm or smaller oxidize completely upon exposure to air. For larger NPs, an oxide shell of 3–4 nm forms instantly on the surface, forming iron/iron oxide core/shell NPs. Groundbreaking studies for the synthesis of iron NPs of larger than 8 nm has largely been achieved by decomposition of iron pentacarbonyl, [Fe(CO)5]. [6,8] Additional reports include the use of other precursors in forming iron nanocubes. However, all of these processes are limited in terms of ease of synthesis and scalability; [Fe(CO)5] is volatile and highly toxic, [5] and other processes involve precursors that are expensive and airsensitive, or require high decomposition temperatures. Here, we chose an easy to handle iron organometallic sandwich compound as the precursor and prepared singlecrystal iron NPs using a simple, low-temperature synthesis method. The iron nanocrystals oxidized naturally to form highly crystalline iron/iron oxide core/shell NPs. The ease of this synthesis facilitates the larger-scale application of stabilized iron NPs. To enable the use of these NPs in biological applications, the NP surface was modified to make the NPs water soluble. The strongly magnetic core/shell NPs are shown to be more effective T2 contrast agents for in vivo MRI and small tumor detection, compared to pure iron oxides. The successful detection of small tumors in vivo demonstrated here holds a great promise for accurate detection of early metastases in human lymph nodes, which has a large impact on the treatment and prognosis of a range of cancers. The iron/iron oxide core/shell NPs were prepared by first synthesizing iron nanocrystals by decomposition of the iron precursor [Fe(C5H5)(C6H7)], in the presence of oleylamine (OLA) stabilizing molecules. The non-carbonyl, sandwich compound was chosen for its simple preparation and ease of decomposition compared to other more stable sandwich compounds such as ferrocene. The synthesis was carried out in a closed reaction vessel under a mild hydrogen atmosphere, at 130 8C. The temperature required was lower than the usual temperature range (150–300 8C) needed for decomposition of other iron precursors in previous studies. Once [*] Dr. K. W. Feindel, Prof. P. T. Callaghan, Prof. R. D. Tilley School of Chemical and Physical Sciences and The MacDiarmid Institute for Advanced Materials and Nanotechnology, Victoria University of Wellington, Wellington 6012 (New Zealand) Fax: (+ 64)4-463-5237 E-mail: richard.tilley@vuw.ac.nz Dr. S. Cheong, Dr. B. Ingham Industrial Research Limited and The MacDiarmid Institute for Advanced Materials and Nanotechnology P. O. Box 31-310, Lower Hutt 5040 (New Zealand) Dr. P. Ferguson, Dr. I. F. Hermans Malaghan Institute of Medical Research P. O. Box 7060, Wellington 6012 (New Zealand)

Synthesis, Alignment, and Magnetic Properties of Monodisperse Nickel Nanocubes

This Communication describes the synthesis of highly monodispersed 12 nm nickel nanocubes. The cubic shape was achieved by using trioctylphosphine and hexadecylamine surfactants under a reducing hydrogen atmosphere to favor thermodynamic growth and the stabilization of {100} facets. Varying the metal precursor to trioctylphosphine ratio was found to alter the nanoparticle size and shape from 5 nm spherical nanoparticles to 12 nm nanocubes. High-resolution transmission electron microscopy showed that the nanocubes are protected from further oxidation by a 1 nm NiO shell. Synchrotron-based X-ray diffraction techniques showed the nickel nanocubes order into [100] aligned arrays. Magnetic studies showed the nickel nanocubes have over 4 times enhancement in magnetic saturation compared to spherical superparamagnetic nickel nanoparticles.

Gold–Palladium Core–Shell Nanocrystals with Size and Shape Control Optimized for Catalytic Performance

Right to the core: The design of nanocatalysts with maximized catalytic performance relies on control of size, shape, and composition. The shell thickness of nanocrystals with core–shell structures can be controlled, thus enabling control over the nanocrystal electronic structure and catalytic properties. Monodisperse faceted icosahedral Au–Pd core–shell nanocrystals (see picture) were synthesized, and optimized for the oxidation of benzyl alcohol to benzaldehyde.

Can Polymorphism be Used to form Branched Metal Nanostructures

Branched metal nanostructures are of great technological importance because of their unique size- and shape-dependent properties. A kinetically controlled synthesis that uses polymorphism to produce branched nickel nanoparticles is presented. These nanoparticles consist of a face-centred cubic (fcc) core and extended arms of alternating fcc and hexagonal close-packed (hcp) nickel phases.

Shape Control from Thermodynamic Growth Conditions: The Case of hcp Ruthenium Hourglass Nanocrystals

Recent successes in forming different shaped face centered cubic (fcc) metal nanostructures has enabled a greater understanding of nanocrystal growth mechanisms. Here we extend this understanding to the synthesis of hexagonally close packed (hcp) metal nanostructures, to form uniquely faceted ruthenium nanocrystals with a well-defined hourglass shape. The hourglass nanocrystals are formed in a three-step thermodynamic growth process with dodecylamine as the organic stabilizer. The hourglass nanocrystals are then shown to readily self-assemble to form a new type of nanocrystal superlattice.

Au-Pd core-shell nanoparticles as alcohol oxidation catalysts: effect of shape and composition.

The right combination: Shape and composition are two important factors governing the catalytic properties of bimetallic nanocatalysts. Combining gold and palladium in a Au-core–Pd-shell structure coupled with an icosahedral morphology is shown to maximize catalytic performance for the selective oxidation of the biorenewable sources glycerol and 1,2-propanediol to glyceric and lactic acids, respectively.

One-pot synthesis of water soluble iron nanoparticles using rationally-designed peptides and ligand release

Herein we report the rational design of new phosphopeptides for control of nucleation, growth and aggregation of water-soluble, superparamagnetic iron-iron oxide core-shell nanoparticles. The use of the designed peptides enables a one-pot synthesis that avoids utilizing unstable or toxic iron precursors, organic solvents, and the need for exchange of capping agent after synthesis of the NPs.

Nanomaterials: Earthworms lit with quantum dots

Yeast, bacteria and fungi have been used to synthesize a variety of nanocrystals. Now, the metal detoxification process in the gut of an earthworm is exploited to produce biocompatible cadmium telluride quantum dots.