Srisurang Suttapreyasri

Influence of Platelet-rich Fibrin on Alveolar Ridge Preservation

AimThe aim of this study was to investigate the influence of platelet-rich fibrin (PRF) on early wound healing and preservation of the alveolar ridge shape following tooth extraction. MethodsIn this clinical trial, 20 symmetrical, premolar extraction sockets using split-mouth design were randomly selected with PRF or blood clot. The evaluations of wound healing, alveolar ridge contour changes, and crestal bone resorption were performed in dental casts and periapical radiographs (T0, initial; T1, 1 week; T2, 2 weeks; T4, 4 weeks; T6, 6 weeks; T8, 8 weeks). ResultsPlatelet-rich fibrin clinically showed early healing of soft tissue covering socket orifices in the first 4 weeks. At the first week, the horizontal resorption on buccal aspect of PRF (1.07 ± 0.31 mm) was significantly less than that of the control (1.81 ± 0.88 mm). Platelet-rich fibrin demonstrated the tendency to enter the steady stage after the fourth week following tooth extraction, whereas in the control group the progression of buccal contour contraction was still detected through the eighth week. Radiographically, the overall resorption of marginal bone levels at mesial and distal to the extraction site in PRF (0.70, 1.23 mm) was comparable to that of the control (1.33, 1.14 mm). Although the PRF group demonstrated faster bone healing compared with the control, no statistically significant difference was detected. ConclusionsThis preliminary result demonstrated neither better alveolar ridge preservation nor enhanced bone formation of PRF in the extraction socket. The use of PRF revealed limited effectiveness by accelerated soft-tissue healing on the first 4 weeks.

Fabrication and characterization of novel nano hydroxyapatite/β-tricalcium phosphate scaffolds in three different composition ratios†

The biphasic calcium phosphate (BCP) concept was introduced to overcome disadvantages of single phase biomaterials. Different composition ratios of BCP bioceramics have been studied, yet controversies regarding the effects of ratio on biomaterial behavior still exist. In this study, BCP scaffolds were prepared from nano hydroxyapatite (HA) and β-tricalcium phosphate (β-TCP) that were synthesized via a solid state reaction. Three different composition ratios of pure BCP and collagen-based BCP scaffolds (%HA/%β-TCP; 30/70, 40/60, and 50/50) were produced using a polymeric sponge method. Physical and mechanical properties of all materials and scaffolds were investigated. SEM showed overall distribution of both macropores (80-200 μm) and micropores (0.5-2 μm) with high interconnected porosities. Total porosity of pure BCP (90% ± 3%) was found to be higher than collagen-based BCP (85% ± 2%). It was observed that following sintering process, dimensional shrinkage of large scaffolds (39% ± 4%) was lower than small ones (42% ± 5%) and scaffolds with high HA ratios (50%) experienced higher dimensional changes than those with higher β-TCP (70%) ratios (45% ± 3% and 36% ± 1%, respectively). Compressive strength of both groups was less than 0.1 MPa and collagen coating had almost no influence on mechanical behavior. Further studies may improve the physical properties of these scaffolds and investigate their exact biological behaviors.

Biodegradable polycaprolactone-chitosan three-dimensional scaffolds fabricated by melt stretching and multilayer deposition for bone tissue engineering: assessment of the physical properties and cellular response

Fabrication of polycaprolactone (PCL)-chitosan (CS) three-dimensional (3D) scaffolds using the novel technique of melt stretching and multilayer deposition was introduced. In brief, firstly, the PCL-CS monofilaments containing 0% (pure PCL), 10%, 20% and 30% CS by weight were fabricated by melting and stretching processes. Secondly, the desired multilayer (3D) scaffolds were fabricated by arranging and depositing the filaments. Physical properties of the filaments and the scaffolds were evaluated. MC3T3-E1 cell lines were seeded on the scaffolds to assess their proliferation. A typical micro-groove pattern was found on the surfaces of pure PCL filaments due to stretching. The filaments of PCL-30%CS had the highest tendency of fracture during stretching and could not be used to form the scaffold. Increasing CS proportions tended to reduce the micro-groove pattern, surface roughness, tensile strength and elasticity of the filaments, whilst compressive strength of the PCL-CS scaffolds was not affected. The average pore size and porosity of the scaffolds were 536.90 ± 17.91 µm and 45.99 ± 2.8% respectively. Over 60 days, degradation of the scaffolds gradually increased (p > 0.05). The more CS containing scaffolds were found to increase in water uptake, but decrease in degradation rate. During the culture period, the growth of the cells in PCL-CS groups was significantly higher than in the pure PCL group (p < 0.05). On culture-day 21, the growth in the PCL-20%CS group was significantly higher than the other groups (p < 0.05). In conclusion, the PCL-20%CS scaffolds obtained the optimum results in terms of physical properties and cellular response.

In vitro biocompatibility analysis of novel nano-biphasic calcium phosphate scaffolds in different composition ratios.

This study aimed to evaluate in vitro biocompatibility of a composite of nanoscale biphasic calcium phosphate (BCP) and collagen (C) compared to pure BCP (P) in different composition ratios of nanohydroxyapatite to nano-β-tricalcium phosphate (HA/β-TCP). Each study group comprised of three ratios of BCP (30/70, 40/60, and 50/50). For evaluation of cellular response toward each ratio, mouse osteoblast (MC3T3-E1) cell line was cultivated on the scaffolds for 19 days. Analysis of cell proliferation, cell viability, cell attachment and morphology, alkaline phosphatase (ALP) activity, and osteocalcin synthesis were done on culture days 1, 3, 7, 13, 15, and 19, appropriately. The scanning electron microscopy showed that the osteoblasts attached successfully to scaffolds surfaces in both BCP groups and in all different ratios by spreading their filopodia and expressing similar viability that was confirmed by confocal laser scanning electron microscope. BCP scaffold (P3070) showed remarkable ALP activity, whereas BCP (P5050) showed highest osteocalcin activity. Collagen coating supported high cell proliferation on culture day 1 and possessed limited benefit restricted to early phase of cell differentiation. In conclusion, the fabricated nanoscale BCP scaffolds offered high biocompatibility and supported well the cell proliferation and differentiation regardless the composition ratio. Furthermore, higher ratio of TCP supported the early phase of cell proliferation, whereas higher HA ratio influenced the later phase. Finally, BCP scaffolds P5050 and C4060 were suggested as candidates for clinical applications.

A preliminary study of the effect of low intensity pulsed ultrasound on new bone formation during mandibular distraction osteogenesis in rabbits

This study assesses the effect of low intensity pulsed ultrasound (LIPUS) on new bone formation during mandibular distraction osteogenesis (DO) in rabbits. 24 rabbits underwent DO on the right side of the mandible. 12 rabbits received a daily 20-min LIPUS (1.5 MHz, 30 mW/cm2) treatment on the first day of the distraction until they were killed at week 0 (immediately after the distraction), week 2 and week 4 after the distraction. Four rabbits were killed at each time point. The other 12 rabbits followed the same protocol without the ultrasound treatment. A plain radiography, a micro-CT scan, a microhardness test and a histological examination were used to evaluate new bone formation in the distraction gap. At week 0 and week 2 after the distraction, the treatment groups showed higher radiopacity and microhardness (p<0.05), and more bone formation was detected by the histological examination. At week 4 after the distraction, there was no statistical difference between the two groups. In this study, LIPUS accelerated new bone formation during the distraction period and 2 weeks after the distraction, which implies that the effective time for using LIPUS is in the early stage of DO.

Bone Regeneration Potential of Biphasic Nanocalcium Phosphate with High Hydroxyapatite/Tricalcium Phosphate Ratios in Rabbit Calvarial Defects.

PURPOSE This study aimed to evaluate the effect of biphasic calcium phosphate (BCP) with high hydroxyapatite/tricalcium phosphate (HA/TCP) ratios on bone formation in rabbit calvarial defects. MATERIALS AND METHODS Sixteen New Zealand white rabbits were randomly divided into two groups, a control group and an experimental group. In each animal, bilateral circular defects (10-mm diameter) were created on the calvarium. In the control group (three rabbits per time frame), defects were grafted with autogenous bone chips in one side and left empty in the other side. In the experimental group (five rabbits per time frame), defects were grafted with BCP1 (HA:TCP, 8:2) in one side and BCP2 (HA:TCP, 9:1) in the contralateral side. The animals were sacrificed at 2 and 8 weeks as designated. Bone formation and residual grafting material were assessed by radiographic densitometry, microcomputed tomography (micro-CT), and histomorphometric analysis. RESULTS Histologic observation revealed that BCP1, BCP2, and the autogenous bone group preserved good contours of the defect, while the unfilled defect group showed connective tissue healing. Micro-CT analysis at 8 weeks showed the comparable percentages of bone volume fraction (% BV/TV) of BCP1 (20.70% ± 2.76%) and BCP2 (20.72% ± 3.97%) and two times higher than that of 2 weeks (9.90% ± 0.75%, 10.57% ± 0.85%). The autogenous group had a significantly (P < .005) greater % BV/TV (34.58% ± 8.85%) than other groups. The percentage of the material volume fraction of BCP1 and BCP2 was not different. The histomorphometry demonstrated a higher increase in newly formed bone from 2 to 8 weeks in all groups, and all were comparable (autogenous: 4.30% ± 0.76%, 12.83% ± 7.74%; unfilled: 2.82% ± 1.19%, 8.14% ± 6.35%; BCP1: 3.01% ± 2.57%, 8.81% ± 3.86%; BCP2: 3.24% ± 1.09%, 10.27% ± 3.98%). CONCLUSION BCP with a high ratio of HA presented good osteoconductive properties and space-maintaining capacity and would be beneficial for long-term preservation or when stable graft volume is essential.

Biomechanical properties of novel biodegradable poly ε-caprolactone–chitosan scaffolds

AIM To investigate the biomechanical properties of poly ε-caprolactone (PCL)-chitosan (CS) scaffolds fabricated by the melt stretching and multilayer deposition technique. METHODS The PCL-CS scaffolds containing CS at 0% (pure PCL), 10%, and 20% by weight were prepared. For the monolayer scaffolds, shear and blending tests simulating the reconstruction of orbital floor defects (situation A) and mandibular defects (situation B) were conducted. For the 3-D scaffolds, compression tests of their superior and lateral aspects were done. RESULTS For the monolayer scaffolds, the pure PCL group had remarkably lower shear strength than the other groups (P > 0.05). In situation A, all groups withstood the forces without any significant difference. In situation B, the pure PCL group could withstand the forces remarkably lower than those of the other group (P < 0.05). The 3-D scaffolds of all groups could withstand compressive forces directed towards their superior aspects. However, they could not withstand the forces directed towards their lateral aspects at the limited strain. CONCLUSIONS The monolayer scaffolds were suitable for reconstruction of the orbital floor and mandibular defects under light load-bearing conditions. The 3-D scaffolds could be used in the high load bearing-areas only if the forces were directed at their superior aspects.

The Fabricated Collagen-Based Nano-Hydroxyapatite/β-Tricalcium Phosphate Scaffolds

The biphasic calcium phosphate (BCP) concept was introduced to overcome disadvantages of single phase biomaterials. In this study, we prepared BCP from nanoHA and β-TCP that were synthesized via a solid state reaction. Three different ratios of pure BCP and collagen-based BCP scaffolds (%HA/%β-TCP; 30/70, 40/60 and 50/50) were produced using a polymeric sponge method. Physical and mechanical properties of all materials and scaffolds were investigated. XRD pattern proved the purity of each HA, β-TCP and BCP. SEM showed overall distribution of macropores (80-200 µm) with appropriate interconnected porosities. Total porosity of pure BCP (93% ± 2) was found to be higher than collagen-based BCP (85%± 3). It was observed that dimensional shrinkage of larger scaffold (39% ± 4) is lower than smaller one (42% ± 5) and scaffolds with higher HA (50%) ratio experienced greater shrinkage than those with higher β-TCP (70%) ratio (45% ±3 and 36% ±1 respectively). Mechanical properties of both groups tend to be very low and collagen coating had no influence on mechanical behavior. Further studies may improve the physical properties of these composite BCP.

The effect of compressive force combined with mechanical vibration on human alveolar bone osteoblasts

Objective This study aimed to investigate the effects of compressive force combined with mechanical vibration on the expression of pro-inflammatory cytokines that promote osteoclastogenesis and related to orthodontic tooth movement acceleration in human alveolar bone osteoblasts in vitro. Methods Osteoblasts were subjected to compressive force (C), mechanical vibration (V), compressive force combined with mechanical vibration (CV), or no force as a control for 12, 24 and 48 h. Interleukin-1 beta (IL-1β), interleukin-6 (IL-6), receptor activator of nuclear factor kappa-Β ligand (RANKL) and osteoprotegerin (OPG) mRNA and protein expression were assessed using quantitative real-time polymerase chain reaction and enzyme-linked immunosorbent assays. Results In C and CV groups, IL-1β and IL-6 mRNA and protein expression were significantly higher and OPG mRNA and protein expression were significantly lower than control and V groups. However, the expressions were not different between C and CV groups. RANKL mRNA and protein expression were not different between any groups. While, OPG mRNA and protein expression in V group were significantly higher than control group. Conclusions Vibration neither enhanced nor inhibited the expression of IL-1β, IL-6, RANKL and OPG in compressed human alveolar bone osteoblasts.

Iliac and mandible osteoblasts exhibit varied responses to LMHF vibration: Sites affect bone cell responses to vibration

The facial and long bones have distinct developmental origins, structures, and cellular compositions. This study aimed to compare the in vitro responses of human mandible and long bone osteoblasts to low‐magnitude, high‐frequency (LMHF) mechanical vibration in terms of expression of mediators of bone remodeling. Osteoblast‐like cell cultures were prepared from iliac crest and mandibular bone specimens from three individuals and cultured in osteogenic induction media. Induction of mature osteoblastic phenotypes was confirmed by analysis of DNA content, alkaline phosphatase activity and gene expression every 3 days for 27 days. Based on gene expression, mature osteoblasts formed by day 15 of induction culture. After 15 days of culture in induction media, mature osteoblasts were subjected to vibration (0, 30, or 60 Hz) for 30 min every 24 h. After 48 h, RANKL, OPG, IL‐1β, IL‐6 and TGF‐β gene, and protein expression were determined by real‐time PCR analysis of total cellular mRNA and ELISAs of the cell supernatants. Both iliac and mandible osteoblasts responded to LMHF vibration: IL‐1β and RANKL mRNA were downregulated and IL‐6 mRNA was upregulated. However, TGF‐ β mRNA was unaltered and OPG mRNA was upregulated in iliac osteoblasts, whereas both TGF‐β and OPG mRNA were downregulated in mandible osteoblasts. As a result, LMHF reduced the RANKL/OPG mRNA ratio in iliac osteoblasts but did not alter the RANKL/OPG mRNA ratio in mandible osteoblasts. This study suggests mature iliac osteoblasts exhibit a more potent anti‐resorptive response to vibration, while this tendency was not obviously apparent in mature mandible osteoblasts.