Stanisław Fic

Processes of Fatigue Destruction in Nanopolymer-Hydrophobised Ceramic Bricks

The article presents a proposal of a model of fatigue destruction of hydrophobised ceramic brick, i.e., a basic masonry material. The brick surface was hydrophobised with two inorganic polymers: a nanopolymer preparation based on dialkyl siloxanes (series 1–5) and an aqueous silicon solution (series 6–10). Nanosilica was added to the polymers to enhance the stability of the film formed on the brick surface. To achieve an appropriate blend of the polymer liquid phase and the nano silica solid phase, the mixture was disintegrated by sonication. The effect of the addition of nano silica and sonication on changes in the rheological parameters, i.e., viscosity and surface tension, was determined. Material fatigue was induced by cyclic immersion of the samples in water and drying at a temperature of 100 °C, which caused rapid and relatively dynamic movement of water. The moisture and temperature effect was determined by measurement of changes in surface hardness performed with the Vickers method and assessment of sample absorbability. The results provided an approximate picture of fatigue destruction of brick and hydrophobic coatings in relation to changes in their temporal stability. Additionally, SEM images of hydrophobic coatings in are shown.

Hydrophobization of Lime Composites with Lignocellulosic Raw Materials from Flax

ABSTRACT The aim of the study was to evaluate the possibility of applying lime binder together with flax fibers and straw to the production of wall materials. Properties of the composites were modified by additives and admixtures. The following laboratory tests were performed: the analysis of the physical characteristics, compressive strength, a water droplet absorption test, water absorption of hydrophobized and standard samples, drying time, and analysis of the structure using scanning electron microscope (SEM). In the paper, there was examined the effectiveness of two formulations differing in the degree of hydrolytic polycondensation, viscosity, and concentration, as these are the factors that determine the final impregnation effect.

Effect of Polysiloxanes on Roughness and Durability of Basalt Fibres–Reinforced Cement Mortar

The influence of roughness and the way it affects the adhesion properties and surface free energy (SFE) of polysiloxanes hydrophobised basalt fibres–reinforced cement mortars were determined in this article. The physical properties of mortars were investigated in the experimental part, which also explored the impact of hydrophobisation and basalt fibres (BF) addition on SFE, frost resistance, contact angle (CA), and roughness. A device capable of calculating all parameters was used to indicate the surface roughness and 3D topography. Prior to and after conducting surface and weight hydrophobisation, the contact angle of mortars was specified. Subsequently, it was used for carrying out SFE calculation by means of Neumann’s method, enabling us to characterize the adhesion properties and wettability of mortars. The research indicated that the surface roughness was substantially decreased, in turn raising the frost resistance. The corrosion resistance drops when the surface roughness, water absorption, and number of fibres in the mortar increase. The SEM images presenting the structure of polysiloxane coating and mortars were provided.