Stefan Jockenhoevel

Fibrin gel – advantages of a new scaffold in cardiovascular tissue engineering

OBJECTIVE The field of tissue engineering deals with the creation of tissue structures based on patient cells. The scaffold plays a central role in the creation of 3-D structures in cardiovascular tissue engineering like small vessels or heart valve prosthesis. An ideal scaffold should have tissue-like mechanical properties and a complete immunologic integrity. As an alternative scaffold the use of fibrin gel was investigated. METHODS Preliminary, the degradation of the fibrin gel was controlled by the supplementation of aprotinin to the culture medium. To prevent tissue from shrinking a mechanical fixation of the gel with 3-D microstructure culture plates and a chemical fixation with poly-L-lysine in different fixation techniques were studied. The thickness of the gel layer was changed from 1 to 3 mm. The tissue development was analysed by light, transmission and scanning electron microscopy. Collagen production was detected by the measurement of hydroxyproline. Injection molding techniques were designed for the formation of complex 3-D tissue structures. RESULTS The best tissue development was observed at an aprotinin concentration of 20 microg per cc culture medium. The chemical border fixation of the gel by poly-L-lysine showed the best tissue development. Up to a thickness of 3 mm no nutrition problems were observed in the light and transmission electron microscopy. The molding of a simplified valve conduit was possible by the newly developed molding technique. CONCLUSION Fibrin gel combines a number of important properties of an ideal scaffold. It can be produced as a complete autologous scaffold. It is moldable and degradation is controllable by the use of aprotinin.

Donor Age of Human Platelet Lysate Affects Proliferation and Differentiation of Mesenchymal Stem Cells

The regenerative potential declines upon aging. This might be due to cell-intrinsic changes in stem and progenitor cells or to influences by the microenvironment. Mesenchymal stem cells (MSC) raise high hopes in regenerative medicine. They are usually culture expanded in media with fetal calf serum (FCS) or other serum supplements such as human platelet lysate (HPL). In this study, we have analyzed the impact of HPL-donor age on culture expansion. 31 single donor derived HPLs (25 to 57 years old) were simultaneously compared for culture of MSC. Proliferation of MSC did not reveal a clear association with platelet counts of HPL donors or growth factors concentrations (PDGF-AB, TGF-β1, bFGF, or IGF-1), but it was significantly higher with HPLs from younger donors (<35 years) as compared to older donors (>45 years). Furthermore, HPLs from older donors increased activity of senescence-associated beta-galactosidase (SA-βgal). HPL-donor age did not affect the fibroblastoid colony-forming unit (CFU-f) frequency, immunophenotype or induction of adipogenic differentiation, whereas osteogenic differentiation was significantly lower with HPLs from older donors. Concentrations of various growth factors (PDGF-AB, TGF-β1, bFGF, IGF-1) or hormones (estradiol, parathormone, leptin, 1,25 vitamin D3) were not associated with HPL-donor age or MSC growth. Taken together, our data support the notion that aging is associated with systemic feedback mechanisms acting on stem and progenitor cells, and this is also relevant for serum supplements in cell culture: HPLs derived from younger donors facilitate enhanced expansion and more pronounced osteogenic differentiation.

Fibrin-polylactide-based tissue-engineered vascular graft in the arterial circulation

There is a clear clinical requirement for the design and development of living, functional, small-calibre arterial grafts. Here, we investigate the potential use of a small diameter, tissue-engineered artery in a pre-clinical study in the carotid artery position of sheep. Small-calibre ( approximately 5 mm) vascular composite grafts were molded using a fibrin scaffold supported by a poly(L/D)lactide 96/4 (P(L/D)LA 96/4) mesh, and seeded with autologous arterial-derived cells prior to 28 days of dynamic conditioning. Conditioned grafts were subsequently implanted for up to 6 months as interposed carotid artery grafts in the same animals from which the cells were harvested. Explanted grafts (n = 6) were patent in each of the study groups (1 month, 3 months, 6 months), with a significant stenosis in one explant (3 months). There was a complete absence of thrombus formation on the luminal surface of grafts, with no evidence for aneurysm formation or calcification after 6 months in vivo. Histological analyses revealed remodeling of the fibrin scaffold with mature autologous proteins, and excellent cell distribution within the graft wall. Positive vWf and eNOS staining, in addition to scanning electron microscopy, revealed a confluent monolayer of endothelial cells lining the luminal surface of the grafts. The present study demonstrates the successful production and mid-term application of an autologous, fibrin-based small-calibre vascular graft in the arterial circulation, and highlights the potential for the creation of autologous implantable arterial grafts in a number of settings.

Tissue-Engineered Small-Caliber Vascular Graft Based on a Novel Biodegradable Composite Fibrin-Polylactide Scaffold

Small-caliber vascular grafts (< or =5 mm) constructed from synthetic materials for coronary bypass or peripheral vascular repair below the knee have poor patency rates, while autologous vessels may not be available for harvesting. The present study aimed to create a completely autologous small-caliber vascular graft by utilizing a bioabsorbable, macroporous poly(L/D)lactide 96/4 [P(L/D)LA 96/4] mesh as a support scaffold system combined with an autologous fibrin cell carrier material. A novel molding device was used to integrate a P(L/D)LA 96/4 mesh in the wall of a fibrin-based vascular graft, which was seeded with arterial smooth muscle cells (SMCs)/fibroblasts and subsequently lined with endothelial cells. The mold was connected to a bioreactor circuit for dynamic mechanical conditioning of the graft over a 21-day period. Graft cell phenotype, proliferation, extracellular matrix (ECM) content, and mechanical strength were analyzed. alpha-SMA-positive SMCs and fibroblasts deposited ECM proteins into the graft wall, with a significant increase in both cell number and collagen content over 21 days. A luminal endothelial cell lining was evidenced by vWf staining, while the grafts exhibited supraphysiological burst pressure (>460 mmHg) after dynamic cultivation. The results of our study demonstrated the successful production of an autologous, biodegradable small-caliber vascular graft in vitro, with remodeling capabilities and supraphysiological mechanical properties after 21 days in culture. The approach may be suitable for a variety of clinical applications, including coronary artery and peripheral artery bypass procedures.

Neutrophil-Derived Cathelicidin Protects from Neointimal Hyperplasia

Cathelicidin-coated stents limit neointima formation. A Narrow Escape for Stents A heart-healthy diet may reduce your risk of atherosclerosis and heart attack, but what if the damage is already done? For severe cases of atherosclerosis, a cardiologist can implant a device called a stent to widen or even open a blocked artery. Ironically, however, stent implantation can activate an immune response, which leads to restenosis—a narrowing of the blood vessels that restricts flow. Stents that elute drugs such as antiproliferative or anti-inflammatory agents have decreased this risk, but at the same time, they increase the risk of blood clot formation. Now, Soehnlein et al. find that stents coated with an antimicrobial peptide produced by innate immune cells promote vascular healing. In an animal model of atherosclerosis, the authors observed that neutrophils could decrease vessel narrowing by secreting the antimicrobial peptide cathelicidin (mouse CRAMP, human LL-37). When deposited by neutrophils at the site of vascular injury, CRAMP recruited new blood vessel–producing cells and promoted the regrowth of vascular endothelial cells in damaged regions. The authors then translated this observation to clinically applicable technology by coating vascular stents with cathelicidin. Indeed, cathelicidin-coated stents reduced in-stent restenosis in their mouse model of atherosclerosis. Although it remains to be seen whether this effect will be reproduced in humans, cathelicidin coating may prevent stents from causing the very problem they’re supposed to treat and thus improve therapy for severe atherosclerosis. Percutaneous transluminal angioplasty with stent implantation is used to dilate arteries narrowed by atherosclerotic plaques and to revascularize coronary arteries occluded by atherothrombosis in myocardial infarction. Commonly applied drug-eluting stents release antiproliferative or anti-inflammatory agents to reduce the incidence of in-stent stenosis. However, these stents may still lead to in-stent stenosis; they also show increased rates of late stent thrombosis, an obstacle to optimal revascularization possibly related to endothelial recovery. Here, we examined the contribution of neutrophils and neutrophilic granule proteins to arterial healing after injury. We found that neutrophil-borne cathelicidin (mouse CRAMP, human LL-37) promoted reendothelization and thereby limited neointima formation after stent implantation. We then translated these findings to an animal model using a neutrophil-instructing, biofunctionalized, miniaturized Nitinol stent coated with LL-37. This stent reduced in-stent stenosis in a mouse model of atherosclerosis, suggesting that LL-37 may promote vascular healing after interventional therapy.

Cardiovascular tissue engineering: a new laminar flow chamber for in vitro improvement of mechanical tissue properties.

A new in vitro flow system was developed to investigate the impact of laminar flow on extracellular matrix formation and tissue development. The dynamic in vitro system was designed to provide a cross flow arrangement of main flow induced by a dialysis roller pump (500 ml/min), and nutrition flow by a perfusion pump (3 ml/hr). Poly-L-lysine precoated polyglycolic acid (PGA) scaffolds (3.14 cm2) were seeded with myofibroblasts of human aortic origin (3.0 × 106 cells/mesh) and incubated for 14 days under static conditions. The tissue was exposed to shear stress over a time period of 14 days (n = 4). The control group was seeded under static conditions (n = 4). To obtain a CO2 independent medium, 25 mM HEPES and 1 mM bicarbonate buffer was supplemented to modified MEM without bicarbonate. Gas samples were collected from the medium, and hydroxyproline assay was performed as a marker of collagen production. The newly developed flow system maintained stable cell culture conditions, with the hydroxyproline concentration significantly higher in group F (p < 0.05). These preliminary experiences with a new in vitro tissue culture system demonstrate the feasibility of using flow induced mechanical stress to enhance extracellular matrix formation.

Scaffold Precoating with Human Autologous Extracellular Matrix for Improved Cell Attachment in Cardiovascular Tissue Engineering

Cell attachment to a scaffold is a precondition for the development of bioengineered valves and vascular substitutes. This attachment is generally facilitated by the use of precoating factors, but some can cause toxic or immunologic side effects. Autologous extracellular matrix (ECM) is used as a precoating factor in our study. Ascending aortic tissue was cultured to obtain human myofibroblasts. Autologous ECM was extracted from the same aortic tissue. Poly(glycolic acid) (PGA) scaffolds were precoated with autologous ECM, human serum, or poly-L-lysine; the control group was pretreated with phosphate buffered saline (PBS). Myofibroblasts were seeded onto each scaffold, and the cell attachment was assayed and compared. Compared with the control group, precoating with human serum, poly-L-lysine, and ECM increased number of attached cells by 24%, 53%, and 48%, respectively. Differences between precoating groups were significant (p < 0.01), except for ECM versus poly-L-lysine. Scanning electron microscopy also demonstrated the high degree of cell attachment to the PGA fibers on scaffolds precoated with ECM and poly-L-lysine. Precoating polymeric scaffold with autologous human extracellular matrix is a very effective method of improving cell attachment in cardiovascular tissue engineering without the potential risk of immunologic reactions.

Development of a composite degradable/nondegradable tissue-engineered vascular graft.

The present study aimed to determine the feasibility of constructing a reinforced autologous vascular graft by combining the advantages of fibrin gel as an autologous cell carrier material with the inherent mechanical strength of an integrated mesh structure. It was hypothesized that the mesh and dynamic culture conditions could be combined to generate mechanically stable and implantable vascular grafts within a shorter cultivation period than traditional methods. A two-step moulding technique was developed to integrate a polyvinylidene fluoride (PVDF) mesh (pore size: 1-2 mm) in the wall of a fibrin-based vascular graft (I.D. 5 mm) seeded with carotid myofibroblasts. The graft was cultured under increasing physiological flow conditions for 2 weeks. Histology, burst strength, and suture retention strength were evaluated. Cell growth and tissue development was excellent within the fibrin gel matrix surrounding the PVDF fibers, and tissue structure demonstrated remarkable similarity to native tissue. The grafts were successfully subjected to physiological flow rates and pressure gradients from the outset, and mechanical properties were enhanced by the mesh structure. Mean suture retention strength of the graft tissue was 6.3 N and the burst strength was 236 mm Hg. Using the vascular composite graft technique, the production of tissue engineered, small-caliber vascular grafts with good mechanical properties within a conditioning period of 14 days is feasible.

Fabrication of fibrin scaffolds with controlled microscale architecture by a two-photon polymerization?micromolding technique

Fabrication of three-dimensional (3D) fibrin scaffolds with tightly controllable pore sizes and interconnections has been investigated. The scaffolds were produced using a combination of two-photon polymerization (2PP) and micromolding techniques. Master structures were fabricated by 2PP and regenerated in fibrin by a two-step microreplication procedure. Scanning electron and optical microscopy observations showed that the fibrin scaffolds exhibited a highly porous and interconnected structure. Seeding of endothelial cells in fibrin scaffolds resulted in their directed lining and spreading within network of microreplicated pores, whereas encapsulation of endothelial cells in fibrin gel blocks led to their chaotic and irregular distribution within constructs. These results demonstrate that the 2PP-micromolding technique is suitable for fabrication of complex 3D structures from natural proteins for tissue engineering applications.

Elastin-like recombinamer-covered stents: Towards a fully biocompatible and non-thrombogenic device for cardiovascular diseases

We explored the use of recently developed gels obtained by the catalyst free click reaction of elastin-like recombinamers (ELRs) to fabricate a new class of covered stents. The approach consists in embedding bare metal stents in the ELR gels by injection molding, followed by endothelialization under dynamic pressure and flow conditions in a bioreactor. The mechanical properties of the gels could be easily tuned by choosing the adequate concentration of the ELR components and their biofunctionality could be tailored by inserting specific sequences (RGD and REDV). The ELR-covered stents exhibited mechanical stability under high flow conditions and could undergo crimping and deployment without damage. The presence of RGD in the ELR used to cover the stent supported full endothelialization in less than 2weeks in vitro. Minimal platelet adhesion and fibrin adsorption were detected after exposure to blood, as shown by immunostaining and scanning electron microscopy. These results prove the potential of this approach towards a new and more effective generation of covered stents which exclude the atherosclerotic plaque from the blood stream and have high biocompatibility, physiological hemocompatibility and reduced response of the immune system.