Network


Latest external collaboration on country level. Dive into details by clicking on the dots.

Hotspot


Dive into the research topics where Stefan Schuldt is active.

Publication


Featured researches published by Stefan Schuldt.


ACS Applied Materials & Interfaces | 2012

Dynamic moisture sorption characteristics of xerogels from water-swellable oligo(oxyethylene) lignin derivatives.

Lars Passauer; Marlene Struch; Stefan Schuldt; Joern Appelt; Yvonne Schneider; Doris Jaros; Harald Rohm

Highly swellable lignin derivatives were prepared by cross-linking of oxidatively preactivated spruce organosolv lignin (OSL) with poly(ethylene) glycol diglycidyl ether (PEGDGE). The lignin gels obtained are considered to be an environmentally friendly alternative to synthetic hydrogels and superabsorbents and represent a novel type of lignin based functional materials. For their application, it is not only the absorption of water in terms of hydrogel swelling that plays an important role, but also the adsorption and retention of moisture by the corresponding xerogels. To reveal the mechanisms involved in moistening and reswelling of the lignin gels, the interaction of water vapor with lyophilized xerogels was investigated and compared with sorption characteristics of parent lignin. The chemical structure of PEGDGE-modified lignin was investigated using attenuated total reflectance Fourier-transformed infrared spectroscopy and selective aminolysis and was related to its sorption and swelling characteristics. Bound and free water in hydrogels was determined by differential scanning calorimetry and by measuring the free swelling capacity of the gels. Moisture sorption of OSL and PEGDGE-modified lignin xerogels was determined using dynamic vapor sorption analysis. In order to determine monolayer and multilayer sorption parameters, sorption data were fitted to the Brunauer-Emmett-Teller and the Guggenheim-Anderson-de Boer model. Swelling properties of the hydrogels and moisture sorption of the corresponding xerogels were found to be strongly dependent on the degree of chemical modification with PEGDGE: Total and free water content of hydrogels decrease with increasing cross-linking density; on the other hand, water bound in hydrogels and moisture sorption of xerogels at high levels of water activity strongly increase, presumably because of the hydration of hydrophilic oligo(oxyethylene) and oligo(oxyethylene) glycol substituents, which lead to moisture diffusion into the xerogel matrix, plasticization, and swelling of the gels.


Biomacromolecules | 2011

Dynamic moisture sorption characteristics of enzyme-resistant recrystallized cassava starch.

Christopher Mutungi; Stefan Schuldt; Calvin Onyango; Yvonne Schneider; Doris Jaros; Harald Rohm

The interaction of moisture with enzyme-resistant recrystallized starch, prepared by heat-moisture treatment of debranched acid-modified or debranched non-acid-modified cassava starch, was investigated in comparison with the native granules. Crystallinities of the powdered products were estimated by X-ray diffraction. Moisture sorption was determined using dynamic vapor sorption analyzer and data fitted to various models. Percent crystallinities of native starch (NS), non-acid-modified recrystallized starch (NAMRS), and acid-modified recrystallized starch (AMRS) were 39.7, 51.9, and 56.1%, respectively. In a(w) below 0.8, sorption decreased in the order NS > NAMRS > AMRS in line with increasing sample crystallinities but did not follow this crystallinity dependence at higher a(w) because of condensation and polymer dissolution effects. Adsorbed moisture became internally absorbed in NS but not in NAMRS and AMRS, which might explain the high resistance of the recrystallized starches to digestion because enzyme and starch cannot approach each other over fairly sufficient surface at the molecular level.


Colloids and Surfaces A: Physicochemical and Engineering Aspects | 2013

The impact of lecithin on rheology, sedimentation and particle interactions in oil-based dispersions

G. Arnold; Stefan Schuldt; Yvonne Schneider; Jens Friedrichs; Frank Babick; Carsten Werner; Harald Rohm


Wear | 2013

Defined abrasion procedures for cutting blades and comparative mechanical and geometrical wear characterization

Stefan Schuldt; G. Arnold; J. Roschy; Yvonne Schneider; Harald Rohm


Journal of Food Engineering | 2016

Analysis of the sharpness of blades for food cutting

Stefan Schuldt; G. Arnold; J. Kowalewski; Yvonne Schneider; Harald Rohm


Lwt - Food Science and Technology | 2014

Acid-induced formation of soy protein gels in the presence of NaCl

Stefan Schuldt; Norbert Raak; Doris Jaros; Harald Rohm


Journal of Food Engineering | 2016

Pre-crack cutting properties of viscoelastic food models

Stefan Schuldt; L. Boden; Yvonne Schneider; Harald Rohm


Journal of Food Engineering | 2016

Experimental characterisation and numerical modelling of cutting processes in viscoelastic solids

Martin Boisly; Stefan Schuldt; Markus Kästner; Yvonne Schneider; Harald Rohm


Journal of Food Engineering | 2018

High-speed cutting of foods: Development of a special testing device

Stefan Schuldt; Tilman Witt; Carolin Schmidt; Yvonne Schneider; Thomas Nündel; Jens-Peter Majschak; Harald Rohm


Food Biophysics | 2018

Thermo-Mechanical Properties of Soft Candy: Application of Time-Temperature Superposition to Mimic Response at High Deformation Rates

Carolin Schmidt; Romy Bornmann; Stefan Schuldt; Yvonne Schneider; Harald Rohm

Collaboration


Dive into the Stefan Schuldt's collaboration.

Top Co-Authors

Avatar

Harald Rohm

Dresden University of Technology

View shared research outputs
Top Co-Authors

Avatar

Yvonne Schneider

Dresden University of Technology

View shared research outputs
Top Co-Authors

Avatar

G. Arnold

Dresden University of Technology

View shared research outputs
Top Co-Authors

Avatar

Doris Jaros

Dresden University of Technology

View shared research outputs
Top Co-Authors

Avatar

Carolin Schmidt

Dresden University of Technology

View shared research outputs
Top Co-Authors

Avatar

J. Kowalewski

Dresden University of Technology

View shared research outputs
Top Co-Authors

Avatar

Calvin Onyango

Dresden University of Technology

View shared research outputs
Top Co-Authors

Avatar
Top Co-Authors

Avatar

Frank Babick

Dresden University of Technology

View shared research outputs
Top Co-Authors

Avatar

J. Roschy

Dresden University of Technology

View shared research outputs
Researchain Logo
Decentralizing Knowledge