Stefano Benazzi

Early dispersal of modern humans in Europe and implications for Neanderthal behaviour

The appearance of anatomically modern humans in Europe and the nature of the transition from the Middle to Upper Palaeolithic are matters of intense debate. Most researchers accept that before the arrival of anatomically modern humans, Neanderthals had adopted several ‘transitional’ technocomplexes. Two of these, the Uluzzian of southern Europe and the Châtelperronian of western Europe, are key to current interpretations regarding the timing of arrival of anatomically modern humans in the region and their potential interaction with Neanderthal populations. They are also central to current debates regarding the cognitive abilities of Neanderthals and the reasons behind their extinction. However, the actual fossil evidence associated with these assemblages is scant and fragmentary, and recent work has questioned the attribution of the Châtelperronian to Neanderthals on the basis of taphonomic mixing and lithic analysis. Here we reanalyse the deciduous molars from the Grotta del Cavallo (southern Italy), associated with the Uluzzian and originally classified as Neanderthal. Using two independent morphometric methods based on microtomographic data, we show that the Cavallo specimens can be attributed to anatomically modern humans. The secure context of the teeth provides crucial evidence that the makers of the Uluzzian technocomplex were therefore not Neanderthals. In addition, new chronometric data for the Uluzzian layers of Grotta del Cavallo obtained from associated shell beads and included within a Bayesian age model show that the teeth must date to ∼45,000–43,000 calendar years before present. The Cavallo human remains are therefore the oldest known European anatomically modern humans, confirming a rapid dispersal of modern humans across the continent before the Aurignacian and the disappearance of Neanderthals.

Using occlusal wear information and finite element analysis to investigate stress distributions in human molars

Simulations based on finite element analysis (FEA) have attracted increasing interest in dentistry and dental anthropology for evaluating the stress and strain distribution in teeth under occlusal loading conditions. Nonetheless, FEA is usually applied without considering changes in contacts between antagonistic teeth during the occlusal power stroke. In this contribution we show how occlusal information can be used to investigate the stress distribution with 3D FEA in lower first molars (M1). The antagonistic crowns M1 and P2–M1 of two dried modern human skulls were scanned by μCT in maximum intercuspation (centric occlusion) contact. A virtual analysis of the occlusal power stroke between M1 and P2–M1 was carried out in the Occlusal Fingerprint Analyser (OFA) software, and the occlusal trajectory path was recorded, while contact areas per time‐step were visualized and quantified. Stress distribution of the M1 in selected occlusal stages were analyzed in strand7, considering occlusal information taken from OFA results for individual loading direction and loading area. Our FEA results show that the stress pattern changes considerably during the power stroke, suggesting that wear facets have a crucial influence on the distribution of stress on the whole tooth. Grooves and fissures on the occlusal surface are seen as critical locations, as tensile stresses are concentrated at these features. Properly accounting for the power stroke kinematics of occluding teeth results in quite different results (less tensile stresses in the crown) than usual loading scenarios based on parallel forces to the long axis of the tooth. This leads to the conclusion that functional studies considering kinematics of teeth are important to understand biomechanics and interpret morphological adaptation of teeth.

The makers of the Protoaurignacian and implications for Neandertal extinction

Cultural prehistory in southern Europe The Protoaurignacian culture appeared in the southern European archeological record around 42,000 years ago and was characterized by artefacts including personal ornaments and bladelets. Archaeologists have debated whether it was ancestral Homo sapiens or Neandertals who made these tools and ornaments. Benazzi et al. analyzed dental remains from two Protoaurignacian sites in Italy and confirm that they were H. sapiens. The arrival of this culture may have led to the demise of Neandertals in these areas (see the Perspective by Conard et al.). Science, this issue p. 793; see also p. 754 The Protoaurignacian culture in southern Europe involved anatomically modern humans and overlapped in time with the last Neandertals. [Also see Perspective by Conard] The Protoaurignacian culture is pivotal to the debate about the timing of the arrival of modern humans in western Europe and the demise of Neandertals. However, which group is responsible for this culture remains uncertain. We investigated dental remains associated with the Protoaurignacian. The lower deciduous incisor from Riparo Bombrini is modern human, based on its morphology. The upper deciduous incisor from Grotta di Fumane contains ancient mitochondrial DNA of a modern human type. These teeth are the oldest human remains in an Aurignacian-related archaeological context, confirming that by 41,000 calendar years before the present, modern humans bearing Protoaurignacian culture spread into southern Europe. Because the last Neandertals date to 41,030 to 39,260 calendar years before the present, we suggest that the Protoaurignacian triggered the demise of Neandertals in this area.

Molar Macrowear Reveals Neanderthal Eco-Geographic Dietary Variation

Neanderthal diets are reported to be based mainly on the consumption of large and medium sized herbivores, while the exploitation of other food types including plants has also been demonstrated. Though some studies conclude that early Homo sapiens were active hunters, the analyses of faunal assemblages, stone tool technologies and stable isotopic studies indicate that they exploited broader dietary resources than Neanderthals. Whereas previous studies assume taxon-specific dietary specializations, we suggest here that the diet of both Neanderthals and early Homo sapiens is determined by ecological conditions. We analyzed molar wear patterns using occlusal fingerprint analysis derived from optical 3D topometry. Molar macrowear accumulates during the lifespan of an individual and thus reflects diet over long periods. Neanderthal and early Homo sapiens maxillary molar macrowear indicates strong eco-geographic dietary variation independent of taxonomic affinities. Based on comparisons with modern hunter-gatherer populations with known diets, Neanderthals as well as early Homo sapiens show high dietary variability in Mediterranean evergreen habitats but a more restricted diet in upper latitude steppe/coniferous forest environments, suggesting a significant consumption of high protein meat resources.

Viewpoints: Diet and Dietary Adaptations in Early Hominins: The Hard Food Perspective

Recent biomechanical analyses examining the feeding adaptations of early hominins have yielded results consistent with the hypothesis that hard foods exerted a selection pressure that influenced the evolution of australopith morphology. However, this hypothesis appears inconsistent with recent reconstructions of early hominin diet based on dental microwear and stable isotopes. Thus, it is likely that either the diets of some australopiths included a high proportion of foods these taxa were poorly adapted to consume (i.e., foods that they would not have processed efficiently), or that aspects of what we thought we knew about the functional morphology of teeth must be wrong. Evaluation of these possibilities requires a recognition that analyses based on microwear, isotopes, finite element modeling, and enamel chips and cracks each test different types of hypotheses and allow different types of inferences. Microwear and isotopic analyses are best suited to reconstructing broad dietary patterns, but are limited in their ability to falsify specific hypotheses about morphological adaptation. Conversely, finite element analysis is a tool for evaluating the mechanical basis of form-function relationships, but says little about the frequency with which specific behaviors were performed or the particular types of food that were consumed. Enamel chip and crack analyses are means of both reconstructing diet and examining biomechanics. We suggest that current evidence is consistent with the hypothesis that certain derived australopith traits are adaptations for consuming hard foods, but that australopiths had generalized diets that could include high proportions of foods that were both compliant and tough.

Technical note: Occlusal fingerprint analysis: Quantification of tooth wear pattern

Information about food ingestion and mastication behavior during the lifespan of an individual is encoded in the dental occlusal wear pattern. To decode this information, we describe a new method called occlusal fingerprint analysis (OFA). Structural parameters of wear facets on the occlusal surface of teeth are quantified from digitized casts for the interpretation of occlusal aspects. The OFA provides an individual three-dimensional dental occlusal compass that indicates the major pathways of interaction between antagonists, revealing information about development, spatial position, and enlargement of wear facets. Humans develop a very similar overall pattern of crown contacts, although specific characteristics of wear facets reflect an individuals occlusal relationships and masticatory behavior. We hypothesize that the wear pattern is a unique character and therefore valuable for individual identification. Furthermore we suggest that OFA, when further developed, may be useful for identification of behavioral, biological, and chemical factors affecting crown morphology.

3D restitution, restoration and prototyping of a medieval damaged skull

Purpose – The purpose of this paper is to describe the method of virtually and physically reconstructing the missing part of a badly damaged medieval skull by means of reverse engineering, computer‐aided design (CAD) and rapid prototyping (RP) techniques.Design/methodology/approach – Laser scanning data were used to create the 3D model of the damaged skull. Starting from this digital model, a virtual reconstruction of the missing part of the skull, based on the ideal symmetry with respect to the mid‐sagittal plane, was achieved in a CAD environment. Finally, the custom‐designed model was directly fabricated by means of the RP process.Findings – The result shows that the designed missing part of the skull fits very well with the existing skeletal remains. The final physical assembly of the prototyped element on the damaged skull was tested, restoring it to its whole original shape.Research limitations/implications – The entire process was time‐consuming and may be applied just to the most representative sk...

Geometric morphometric methods for three-dimensional virtual reconstruction of a fragmented cranium: the case of Angelo Poliziano

The process of forensic identification of missing individuals is frequently reliant on the superimposition of cranial remains onto an individuals picture and/or facial reconstruction. In the latter, the integrity of the skull or a cranium is an important factor in successful identification. Here, we recommend the usage of computerized virtual reconstruction and geometric morphometrics for the purposes of individual reconstruction and identification in forensics. We apply these methods to reconstruct a complete cranium from facial remains that allegedly belong to the famous Italian humanist of the fifteenth century, Angelo Poliziano (1454–1494). Raw data was obtained by computed tomography scans of the Poliziano face and a complete reference skull of a 37-year-old Italian male. Given that the amount of distortion of the facial remains is unknown, two reconstructions are proposed: The first calculates the average shape between the original and its reflection, and the second discards the less preserved left side of the cranium under the assumption that there is no deformation on the right. Both reconstructions perform well in the superimposition with the original preserved facial surface in a virtual environment. The reconstruction by means of averaging between the original and reflection yielded better results during the superimposition with portraits of Poliziano. We argue that the combination of computerized virtual reconstruction and geometric morphometric methods offers a number of advantages over traditional plastic reconstruction, among which are speed, reproducibility, easiness of manipulation when superimposing with pictures in virtual environment, and assumptions control.

Comparison of dental measurement systems for taxonomic assignment of first molars

Morphometrics of the molar crown is based traditionally on diameter measurements but is nowadays more often based on 2D image analysis of crown outlines. An alternative approach involves measurements at the level of the cervical line. We compare the information content of the two options in a three-dimensional (3D) digital sample of lower and upper first molars (M(1) and M(1) ) of modern human and Neanderthal teeth. The cervical outline for each tooth was created by digitizing the cervical line and then sectioning the tooth with a best fit plane. The crown outline was projected onto this same plane. The curves were analyzed by direct extraction of diameters, diagonals, and area and also by principal component analysis either of the residuals obtained by regressing out these measurements from the radii (shape information) or directly by the radii (size and shape information). For M(1) , the crown and cervical outline radii allow us to discriminate between Neanderthals and modern humans with 90% and 95% accuracy, respectively. Fairly good discrimination between the groups (80-82.5%) was also obtained using cervical measurements. With respect to M(1) , general overlap of the two groups was obtained by both crown and cervical measurements; however, the two taxa were differentiable by crown outline residuals (90-97%). Accordingly, while crown diameters or crown radii should be used for taxonomic analysis of unworn or slightly worn M(1) s, the crown outline, after regressing out size information, could be promising for taxonomic assignment of lower M1s.

Brief communication: Comparing loading scenarios in lower first molar supporting bone structure using 3D finite element analysis

Finite element analysis (FEA) is a widespread technique to evaluate the stress/strain distributions in teeth or dental supporting tissues. However, in most studies occlusal forces are usually simplified using a single vector (i.e., point load) either parallel to the long tooth axis or oblique to this axis. In this pilot study we show how lower first molar occlusal information can be used to investigate the stress distribution with 3D FEA in the supporting bone structure. The LM(1) and the LP(2) -LM(1) of a dried modern human skull were scanned by μCT in maximum intercuspation contact. A kinematic analysis of the surface contacts between LM(1) and LP(2) -LM(1) during the power stroke was carried out in the occlusal fingerprint analyzer (OFA) software to visualize contact areas during maximum intercuspation contact. This information was used for setting the occlusal molar loading to evaluate the stress distribution in the supporting bone structure using FEA. The output was compared to that obtained when a point force parallel to the long axis of the tooth was loaded in the occlusal basin. For the point load case, our results indicate that the buccal and lingual cortical plates do not experience notable stresses. However, when the occlusal contact areas are considered, the disto-lingual superior third of the mandible experiences high tensile stresses, while the medio-lingual cortical bone is subjected to high compressive stresses. Developing a more realistic loading scenario leads to better models to understand the relationship between masticatory function and mandibular shape and structures. Am J Phys Anthropol, 2012.