Stefano Bornigia

Performance Assessment of Two Commercial Amplification Assays for Direct Detection of Mycobacterium tuberculosis Complex from Respiratory and Extrapulmonary Specimens

ABSTRACT The new BDProbeTec ET Mycobacterium tuberculosis Complex Direct Detection Assay (DTB) was compared with the enhanced M. tuberculosis Amplified Direct Test (AMTDII). The system is an automated walkaway system characterized by simultaneous DNA amplification (strand displacement amplification) and real-time fluorometric detection. It also contains an internal amplification control (IAC) designed to identify inhibition from the processed samples. The AMTDII assay amplifies rRNA by transcription-mediated amplification; it uses hybridization with a chemoluminescent probe as a detection system and is entirely manual. A total of 515 N-acetyl-l-cysteine-sodium hydroxide-decontaminated respiratory (n = 331) and extrapulmonary (n = 184) sediments (from 402 patients) were tested in parallel by both assays. The results were compared with those of acid-fast staining and culture (solid plus liquid media), setting the combination of culture and clinical diagnosis as the “gold standard.” Culture results from the tested specimens were as follows: 121 Mycobacterium tuberculosis complex (MTB) (98 smear-positive), 46 nontuberculous mycobacteria (38 smear-positive), and 338 culture-negative results. After resolution of the discrepant results, the percent sensitivity, percent specificity, and positive and negative likelihood ratios for AMTDII were 88%, 99.2%, 110, and 0.11 for respiratory specimens and 74.3%, 100%, 740, and 0.26 for extrapulmonary specimens, respectively. The corresponding values for DTB were 94.5%, 99.6%, 235, and 0.05 for respiratory specimens and 92.3%, 100%, 920, and 0.07 for extrapulmonary specimens, respectively. The cumulative difference for all tuberculosis-positive extrapulmonary specimens was significant (P = 0.03). The overall inhibition rate for DTB was 5% (26 specimens). We conclude that both amplification assays proved to be rapid and specific for the detection of MTB in clinical samples and particularly feasible for a routine laboratory work flow. DTB combines a labor-intensive specimen preparation procedure with a completely automated amplification and detection. Finally, differences between AMTDII and DTB sensitivities were associated with the presence of inhibitory samples that the former assay, lacking IAC, could not detect.

Comparison of MB/BacT ALERT 3D System with Radiometric BACTEC System and Löwenstein-Jensen Medium for Recovery and Identification of Mycobacteria from Clinical Specimens: a Multicenter Study

ABSTRACT The MB/BacT ALERT 3D System (MB/BacT) (Organon Teknika, Boxtel, The Netherlands) is a fully automated, nonradiometric system with a revised antibiotic supplement kit designed for the recovery of mycobacteria from clinical specimens. In a multicenter study, the recovery rate of acid-fast bacilli (AFB) and the mean time to their detection from clinical specimens was determined by using the MB/BacT system. Data were compared to those assessed by the radiometric BACTEC 460 system (B460) and by culture on Löwenstein-Jensen (L-J) solid medium. A total of 2,859 respiratory and extrapulmonary specimens were processed by the N-acetyl-l-cysteine (NALC)-NaOH method using two different concentrations of sodium hydroxide; 1.5% was adopted in study design A (1,766 specimens), and 1.0% was used in study design B (1,093 specimens). The contamination rates for MB/BacT were 4.6% (study design A) and 7.1% (study design B). One hundred seventy-nine mycobacterial isolates were detected by study design A, with 148 Mycobacterium tuberculosis complex (MTB) isolates and 31 nontuberculous mycobacteria (NTM) isolates. Overall recovery rates were 78.8% for MB/BacT (P = 0.0049), 64.2% for L-J (P < 0.0001), and 87.1% for B460, whereas they were 84.5, 70.9, and 91.2%, respectively, for MTB alone. A total of 125 mycobacteria were detected by study design B, with 46 MTB and 79 NTM. Overall recovery rates by the individual systems were 57.6% (P = 0.0002), 56.8% (P = 0.0001), and 80% for MB/BacT, L-J, and B460, respectively, whereas the rates were 91.3, 78.3, and 97.8% for MTB alone. By study design A, the mean times to detection of smear-positive MTB, smear-negative MTB, and NTM were 11.5, 19.9, and 19.6 days, respectively, with the MB/BacT; 8.3, 16.8, and 16.6 days, respectively, with the B460; and 20.6, 32.1, and 27.8 days, respectively, with L-J medium. By study design B, the mean times were 15.1, 26.7, and 26 days with the MB/BacT; 11.7, 21.3, and 24.8 days with the B460; and 20.4, 28.7, and 28.4 days with L-J medium. Identification was attempted by probing (Accuprobe) MB/BacT-positive bottles within the first working day following instrument positive flag. Results were compared to those obtained in the B460 positive vials by thep-nitro-α-acetylamino-β-hydroxypropiophenone (NAP) test (study design A) or by the Accuprobe assay (study design B). About 90% of MTB and 100% of NTM could be identified, showing turnaround times closely related to those obtained by combining B460 and the NAP test or the Accuprobe assay. In conclusion, even though recovery rates were shown to be lower than B460, especially for NTM, and contaminants were somewhat higher, MB/BacT represents a valuable alternative to the radiometric system, especially in those laboratories where disposal of radioactive waste is restricted. Finally, when AFB are cultured in nonradiometric liquid media, our data (detection times and bacterial overgrowth rates) suggest that decontamination with 1.5% NaOH may be more suitable than the standard NALC-NaOH.

Prevention of False Resistance Results Obtained in Testing the Susceptibility of Mycobacterium tuberculosis to Pyrazinamide with the Bactec MGIT 960 System Using a Reduced Inoculum

ABSTRACT The susceptibility of 211 clinical isolates of Mycobacterium tuberculosis complex (201 M. tuberculosis and 10 Mycobacterium bovis isolates) to pyrazinamide (PZA) was assessed by the nonradiometric Bactec MGIT 960 system (M960). Detection of PZA resistance was followed by a repeat testing using a reduced inoculum (RI) of 0.25 ml instead of 0.5 ml. According to the first M960 analysis, resistance was observed in 55 samples. In the RI assay, 32 samples turned out to be susceptible and 23 proved to be resistant (58.2% false positivity). The Bactec 460 assay confirmed as resistant those strains detected by the RI assay, while discrepant results were found susceptible. Mutation analysis performed on 13 M. tuberculosis isolates detected pncA mutations in 11 samples. On the basis of our data, we suggest using the RI assay to confirm all PZA resistance results obtained with the standard M960 assay. Further studies are required to confirm our findings.

Mycobacterium celatum Pulmonary Infection in the Immunocompetent: Case Report and Review

Mycobacterium celatum has been shown to cause disease in immunocompromised patients. We report a case of serious pulmonary infection caused by M. celatum in an apparently immunocompetent patient and review the characteristics of two other reported cases. Clinical and radiologic symptoms and signs included cough, malaise, and weight loss associated with cavitary lesions and pulmonary infiltrates. Although M. celatum is easy to detect in clinical specimens by liquid and solid media, it may be misidentified as a member of the M. tuberculosis complex or as M. xenopi. M. celatum pulmonary infection appears to respond to antimycobacterial chemotherapy, particularly with clarithromycin.

Mycobacterium lentiflavum as an Emerging Causative Agent of Cervical Lymphadenitis

ABSTRACT A lymph node excision was performed on a 45-year-old woman with left cervical swelling. The disorder which developed after the patient had undergone oral surgery for a severe periodontal disease failed to respond to antimicrobial chemotherapy. A mycobacterial strain subsequently identified by high-performance liquid chromatography analysis of cell wall mycolic acids as Mycobacterium lentiflavum grew from the excised specimen. This case and previously published reports highlight the relevance of M. lentiflavum as an emerging causative agent of mycobacterial cervical lymphadenitis.

Unreliable detection of Mycobacterium xenopi by the nonradiometric Bactec MGIT 960 culture system.

From June 2006 to December 2007, 3,648 clinical specimens consecutively received for mycobacterial culture were investigated. Each processed sample was inoculated into Bactec MGIT 960 liquid medium and a Löwenstein-Jensen slant. Tubes that were flagged as positive by the instrument as well as those determined to be negative after 42 days of incubation were removed, visually inspected for growth, and checked for the presence of acid-fast bacilli. Three hundred sixty-nine mycobacterial strains were recovered; of the 44 Mycobacterium xenopi isolates recovered by MGIT medium, only 13 were detected by the instrument (P < 0.0001). Most tubes yielding M. xenopi exhibited a peculiar pattern of growth characterized by a scant number of round, yellow-pigmented granules instead of the fine, evenly dispersed clumps usually observed for mycobacteria. It is suggested to check all individual tubes discarded by the MGIT 960 system at the end of the incubation period to prevent a significant amount of previously undetected growth from being missed.

Performance of a commercial nucleic acid amplification test with extrapulmonary specimens for the diagnosis of tuberculosis

The laboratory diagnosis of tuberculosis (TB) on extrapulmonary specimens is particularly challenging. A number of commercial nucleic acid amplification tests able to detect and identify Mycobacterium tuberculosis (MTB) complex directly from respiratory secretions have been developed, but their use on extrapulmonary samples still calls for validation. The BDProbeTec ET Mycobacterium tuberculosis Complex Direct Detection Assay (DTB) was applied to 918 consecutive extrapulmonary specimens (collected from 863 patients), including 84 gastric aspirates, 145 urine, 136 sterile body fluids, 83 cerebrospinal (CSF) fluids, 237 fine-needle aspirates, 175 pus, 56 biopsies, and two stool specimens. The results were compared with those of acid-fast staining and culture (solid plus liquid media), setting the combination of culture and clinical diagnosis as the gold standard. Ninety-two specimens yielded culture positive for MTB and 24 (smear- and culture-negative) were from patients with TB clinical diagnosis. Of these, 96 were DTB-positive, including all of those from culture-negative TB cases. From 26 specimens, nontuberculous mycobacteria were grown. Two of these specimens were positive by the DTB assay. Finally, of the 776 samples that were smear- and culture-negative for acid-fast bacilli (AFB), collected from patients for whom the diagnosis of TB was excluded, six were DTB-positive. The overall sensitivity, specificity, and positive and negative predictive values (PPV and NPV, respectively) of extrapulmonary samples were 82.7, 99.0, 92.3, and 97.8%, respectively. Although, at present, amplification assays cannot replace culture techniques, DTB proved to be rapid and specific for the detection of MTB in extrapulmonary samples.

Evolution of Resistance to Erythromycin, Norfloxacin, and Tetracycline in Thermophylic Campylobacters

Thermophylic campylobacters are important enteric pathogens and have emerged as one of the leading causes of bacterial diarrhoea worldwide. Campylobacter enteritis is usually a mild to moderate self-limited disease and does not require antibiotic treatment except in severe cases when serious symptoms, relapses or a prolonged course of infection occur.