Stephan Handschuh

A correlative approach for combining microCT, light and transmission electron microscopy in a single 3D scenario.

BackgroundIn biomedical research, a huge variety of different techniques is currently available for the structural examination of small specimens, including conventional light microscopy (LM), transmission electron microscopy (TEM), confocal laser scanning microscopy (CLSM), microscopic X-ray computed tomography (microCT), and many others. Since every imaging method is physically limited by certain parameters, a correlative use of complementary methods often yields a significant broader range of information. Here we demonstrate the advantages of the correlative use of microCT, light microscopy, and transmission electron microscopy for the analysis of small biological samples.ResultsWe used a small juvenile bivalve mollusc (Mytilus galloprovincialis, approximately 0.8 mm length) to demonstrate the workflow of a correlative examination by microCT, LM serial section analysis, and TEM-re-sectioning. Initially these three datasets were analyzed separately, and subsequently they were fused in one 3D scene. This workflow is very straightforward. The specimen was processed as usual for transmission electron microscopy including post-fixation in osmium tetroxide and embedding in epoxy resin. Subsequently it was imaged with microCT. Post-fixation in osmium tetroxide yielded sufficient X-ray contrast for microCT imaging, since the X-ray absorption of epoxy resin is low. Thereafter, the same specimen was serially sectioned for LM investigation. The serial section images were aligned and specific organ systems were reconstructed based on manual segmentation and surface rendering. According to the region of interest (ROI), specific LM sections were detached from the slides, re-mounted on resin blocks and re-sectioned (ultrathin) for TEM. For analysis, image data from the three different modalities was co-registered into a single 3D scene using the software AMIRA®. We were able to register both the LM section series volume and TEM slices neatly to the microCT dataset, with small geometric deviations occurring only in the peripheral areas of the specimen. Based on co-registered datasets the excretory organs, which were chosen as ROI for this study, could be investigated regarding both their ultrastructure as well as their position in the organism and their spatial relationship to adjacent tissues. We found structures typical for mollusc excretory systems, including ultrafiltration sites at the pericardial wall, and ducts leading from the pericardium towards the kidneys, which exhibit a typical basal infolding system.ConclusionsThe presented approach allows a comprehensive analysis and presentation of small objects regarding both the overall organization as well as cellular and subcellular details. Although our protocol involves a variety of different equipment and procedures, we maintain that it offers savings in both effort and cost. Co-registration of datasets from different imaging modalities can be accomplished with high-end desktop computers and offers new opportunities for understanding and communicating structural relationships within organisms and tissues. In general, the correlative use of different microscopic imaging techniques will continue to become more widespread in morphological and structural research in zoology. Classical TEM serial section investigations are extremely time consuming, and modern methods for 3D analysis of ultrastructure such as SBF-SEM and FIB-SEM are limited to very small volumes for examination. Thus the re-sectioning of LM sections is suitable for speeding up TEM examination substantially, while microCT could become a key-method for complementing ultrastructural examinations.

Functional morphology of the feeding apparatus and evolution of proboscis length in metalmark butterflies (Lepidoptera: Riodinidae)

An assessment of the anatomical costs of extremely long proboscid mouthparts can contribute to the understanding of the evolution of form and function in the context of insect feeding behaviour. An integrative analysis of expenses relating to an exceptionally long proboscis in butterflies includes all organs involved in fluid feeding, such as the proboscis plus its musculature, sensilla, and food canal, as well as organs for proboscis movements and the suction pump for fluid uptake. In the present study, we report a morphometric comparison of derived long-tongued (proboscis approximately twice as long as the body) and short-tongued Riodinidae (proboscis half as long as the body), which reveals the non-linear scaling relationships of an extremely long proboscis. We found no elongation of the tip region, low numbers of proboscis sensilla, short sensilla styloconica, and no increase of galeal musculature in relation to galeal volume, but a larger food canal, as well as larger head musculature in relation to the head capsule. The results indicate the relatively low extra expense on the proboscis musculature and sensilla equipment but significant anatomical costs, such as reinforced haemolymph and suction pump musculature, as well as thick cuticular proboscis walls, which are functionally related to feeding performance in species possessing an extremely long proboscis.

One proboscis, two tasks: Adaptations to blood-feeding and nectar-extracting in long-proboscid horse flies (Tabanidae, Philoliche)

Female Pangoniinae in the tabanid fly genus Philoliche can display remarkably elongated proboscis lengths, which are adapted for both blood- and nectar-feeding. Apart from their role as blood-sucking pests, they represent important pollinators of the South African flora. This study examines the morphology of the feeding apparatus of two species of long-proboscid Tabanidae: Philoliche rostrata and Philoliche gulosa – both species display adaptations for feeding from a diverse guild of long-tubed flowers, and on vertebrate blood. The heavily sclerotised proboscis can be divided into two functional units. The short, proximal piercing part is composed of the labrum-epipharynx unit, the hypopharynx and paired mandible and maxilla. The foldable distal part is composed of the prementum of the labium which solely forms the food canal and is responsible for nectar uptake via the apical labella. The proboscis works as a drinking straw, relying on a pressure gradient provided by a two-part suction pump in the head. Both proboscis and body lengths and suction pump dimensions show a significantly correlated allometric relationship with each other. This study provides detailed insights into the adaptations for a dual diet using an elongated sucking proboscis, and considers these adaptations in the context of the evolution of nectar feeding in Brachycera.

Genetic Ablation of Fgf23 or Klotho Does not Modulate Experimental Heart Hypertrophy Induced by Pressure Overload.

Left ventricular hypertrophy (LVH) ultimately leads to heart failure in conditions of increased cardiac pre- or afterload. The bone-derived phosphaturic and sodium-conserving hormone fibroblast growth factor-23 (FGF23) and its co-receptor Klotho have been implicated in the development of uremic LVH. Using transverse aortic constriction (TAC) in gene-targeted mouse models, we examine the role of Fgf23 and Klotho in cardiac hypertrophy and dysfunction induced by pressure overload. TAC profoundly increases serum intact Fgf23 due to increased cardiac and bony Fgf23 transcription and downregulation of Fgf23 cleavage. Aldosterone receptor blocker spironolactone normalizes serum intact Fgf23 levels after TAC by reducing bony Fgf23 transcription. Notably, genetic Fgf23 or Klotho deficiency does not influence TAC-induced hypertrophic remodelling, LV functional impairment, or LV fibrosis. Despite the profound, aldosterone-mediated increase in circulating intact Fgf23 after TAC, our data do not support an essential role of Fgf23 or Klotho in the pathophysiology of pressure overload-induced cardiac hypertrophy.

Time management and nectar flow: flower handling and suction feeding in long-proboscid flies (Nemestrinidae: Prosoeca)

A well-developed suction pump in the head represents an important adaptation for nectar-feeding insects, such as Hymenoptera, Lepidoptera and Diptera. This pumping organ creates a pressure gradient along the proboscis, which is responsible for nectar uptake. The extremely elongated proboscis of the genus Prosoeca (Nemestrinidae) evolved as an adaptation to feeding from long, tubular flowers. According to the functional constraint hypothesis, nectar uptake through a disproportionately elongated, straw-like proboscis increases flower handling time and consequently lowers the energy intake rate. Due to the conspicuous length variation of the proboscis of Prosoeca, individuals with longer proboscides are hypothesised to have longer handling times. To test this hypothesis, we used field video analyses of flower-visiting behaviour, detailed examinations of the suction pump morphology and correlations of proboscis length with body length and suction pump dimensions. Using a biomechanical framework described for nectar-feeding Lepidoptera in relation to proboscis length and suction pump musculature, we describe and contrast the system in long-proboscid flies. Flies with longer proboscides spent significantly more time drinking from flowers. In addition, proboscis length and body length showed a positive allometric relationship. Furthermore, adaptations of the suction pump included an allometric relationship between proboscis length and suction pump muscle volume and a combination of two pumping organs. Overall, the study gives detailed insight into the adaptations required for long-proboscid nectar feeding, and comparisons with other nectar-sucking insects allow further considerations of the evolution of the suction pump in insects with sucking mouthparts.

Organogenesis in the budding process of the freshwater bryozoan Cristatella mucedo Cuvier, 1798 (Bryozoa, Phylactolaemata).

The phylogenetic position of bryozoans has been disputed for decades, and molecular phylogenetic analyzes have not unequivocally clarified their position within the Bilateria. As probably the most basal bryozoans, Phylactolaemata is the most promising taxon for large‐scale phylogenetic comparisons. These comparisons require extending the morphological and developmental data by investigating different phylactolaemate species to identify basal characters and resolve in‐group phylogeny. Accordingly, we analyzed the bud development and the organogenesis of the freshwater bryozoan Cristatella mucedo, with special focus on the formation of the digestive tract and differentiation of the coelomic compartments. Most parts of the digestive tract are formed as an outpocketing at the future anal side growing towards the mouth area. The ganglion is formed by an invagination between the anlagen of the mouth and anus. The lophophoral arms develop as paired lateral protrusions into the lumen of the bud and are temporarily connected by a median, thin bridge. All coelomic compartments are confluent during their development and also in the adult. The epistome coelom develops by fusion of two peritoneal infolds between the gut loop and overgrows the ganglion medially. The coelomic ring canal on the oral side develops by two lateral ingrowths and supplies the oral tentacles. On the forked canal, supplying the innermost row of tentacles above the epistome, a bladder‐shaped swelling, probably with excretory function, is present in some adults. It remains difficult to draw comparisons to other phyla because only few studies have dealt with budding of potentially related taxa in more detail. Nonetheless, our results show that comparative organogenesis can contribute to phylactolaemate systematics and, when more data are available, possibly to that of other bryozoan classes and bilaterian phyla. J. Morphol., 2011.

Musculoskeletal architecture of the prey capture apparatus in salamandrid newts with multiphasic lifestyle : does anatomy change during the seasonal habitat switches?

Some newt species change seasonally between an aquatic and a terrestrial life as adults, and are therefore repeatedly faced with different physical circumstances that affect a wide range of functions of the organism. For example, it has been observed that seasonally habitat‐changing newts display notable changes in skin texture and tail fin anatomy, allowing one to distinguish an aquatic and a terrestrial morphotype. One of the main functional challenges is the switch between efficient aquatic and terrestrial prey capture modes. Recent studies have shown that newts adapt quickly by showing a high degree of behavioral flexibility, using suction feeding in their aquatic stage and tongue prehension in their terrestrial stage. As suction feeding and tongue prehension place different functional demands on the prey capture apparatus, this behavioral flexibility may clearly benefit from an associated morphological plasticity. In this study, we provide a detailed morphological analysis of the musculoskeletal system of the prey capture apparatus in the two multiphasic newt species Ichthyosaura alpestris and Lissotriton vulgaris by using histological sections and micro‐computed tomography. We then test for quantitative changes of the hyobranchial musculoskeletal system between aquatic and terrestrial morphotypes, The descriptive morphology of the cranio‐cervical musculoskeletal system provides new insights on form and function of the prey capture apparatus in newts, and the quantitative approach shows hypertrophy of the hyolingual musculoskeletal system in the terrestrial morphotype of L. vulgaris but hypertrophy in the aquatic morphotype of I. alpestris. It was therefore concluded that the seasonal habitat shifts are accompanied by a species‐dependent muscular plasticity of which the potential effect on multiphasic feeding performance in newts remains unclear.

Insights into the organization of plumatellid larvae (lophotrochozoa, Bryozoa) by means of 3D-imaging and confocal microscopy

Within the Lophotrochozoa, the Bryozoa or Ectoprocta remain one of the phyla whose phylogenetic relation to other lophotrochozoans is still controversely discussed. To complement existing data and to gain more insight into bryozoan character evolution, we analyzed the morphology of the larva of the phylactolaemate Plumatella sp. The larva of Plumatella spp. consists of an outer ciliated mantle that covers two differentiated polypides. The muscular and serotonergic nervous system of the polypides correspond to previous studies. The two polypides and their corresponding buds differ in size, which, together with a comparison among bryozoans, indicates that a single polypide is the basal condition. The whole larval mantle and mantle fold are supplied with circular and longitudinal muscles, the former being more pronounced in the mantle fold. The apical plate on the anterior side contains a diffuse mesh of crossing fibers and thus differs from previous descriptions, which recognized a regular muscular grid. The serotonergic nervous system in the mantle and mantle fold consists of a diffuse basiepidermal nerve net with its highest concentration at the apical plate. Serotonin immunoreactivity so far has not been detected in the mantle fold. However, the presence of other neurotransmitters in the mantle fold shown by previous studies indicates that this nerve net is a common feature of phylactolaemate larvae. The main difference between currently analyzed phylactolaemate larvae seems to be the complexity of the larval mantle musculature, which most likely plays an important role during metamorphosis. This study confirms previous interpretations that the apical plate pole does not correspond to the apical pole of gymnolaemate larvae but to their oral side. Accelerated asexual development on the aboral pole leads to the suggestion that an apical organ is never formed and the apical plate compensates for its absence in the free‐swimming period. J. Morphol. 276:109–120, 2015.

Osteoblast-specific overexpression of amphiregulin leads to transient increase in femoral cancellous bone mass in mice

The epidermal growth factor receptor ligand amphiregulin (AREG) has been implicated in bone physiology and in bone anabolism mediated by intermittent parathyroid hormone treatment. However, the functions of AREG in bone have been only incipiently evaluated in vivo. Here, we generated transgenic mice overexpressing AREG specifically in osteoblasts (Col1-Areg). pQCT analysis of the femoral metaphysis revealed increased trabecular bone mass at 4, 8, and 10weeks of age in Col1-Areg mice compared to control littermates. However, the high bone mass phenotype was transient and disappeared in older animals. Micro-CT analysis of the secondary spongiosa confirmed increased trabecular bone volume and trabecular number in the distal femur of 4-week-old AREG-tg mice compared to control littermates. Furthermore, μ-CT analysis of the primary spongiosa revealed unaltered production of new bone trabeculae in distal femora of Col1-Areg mice. Histomorphometric analysis revealed a reduced number of osteoclasts in 4-week-old Col1-Areg mice, but not at later time points. Cancellous bone formation rate remained unchanged in Col1-Areg mice at all time points. In addition, bone mass and bone turnover in lumbar vertebral bodies were similar in Col1-Areg and control mice at all ages examined. Proliferation and differentiation of osteoblasts isolated from neonatal calvariae did not differ between Col1-Areg and control mice. Taken together, these data suggest that AREG overexpression in osteoblasts induces a transient high bone mass phenotype in the trabecular compartment of the appendicular skeleton by a growth-related, non-cell autonomous mechanism, leading to a positive bone balance with unchanged bone formation and lowered bone resorption.

Analysis of Vestibular Labyrinthine Geometry and Variation in the Human Temporal Bone

Stable posture and body movement in humans is dictated by the precise functioning of the ampulla organs in the semi-circular canals. Statistical analysis of the interrelationship between bony and membranous compartments within the semi-circular canals is dependent on the visualization of soft tissue structures. Thirty-one human inner ears were prepared, post-fixed with osmium tetroxide and decalcified for soft tissue contrast enhancement. High resolution X-ray microtomography images at 15 μm voxel-size were manually segmented. This data served as templates for centerline generation and cross-sectional area extraction. Our estimates demonstrate the variability of individual specimens from averaged centerlines of both bony and membranous labyrinth. Centerline lengths and cross-sectional areas along these lines were identified from segmented data. Using centerlines weighted by the inverse squares of the cross-sectional areas, plane angles could be quantified. The fit planes indicate that the bony labyrinth resembles a Cartesian coordinate system more closely than the membranous labyrinth. A widening in the membranous labyrinth of the lateral semi-circular canal was observed in some of the specimens. Likewise, the cross-sectional areas in the perilymphatic spaces of the lateral canal differed from the other canals. For the first time we could precisely describe the geometry of the human membranous labyrinth based on a large sample size. Awareness of the variations in the canal geometry of the membranous and bony labyrinth would be a helpful reference in designing electrodes for future vestibular prosthesis and simulating fluid dynamics more precisely.