Stephanus Axnanda

Importance of the Metal–Oxide Interface in Catalysis: In Situ Studies of the Water–Gas Shift Reaction by Ambient-Pressure X-ray Photoelectron Spectroscopy†

The traditional approach to the optimization of metal/oxide catalysts has focused on the properties of the metal and the selection of the proper oxide for its dispersion. The importance of metal–oxide interfaces has long been recognized, [1] but the molecular determination of their properties and role is only now emerging. [2] Atoms with properties ranging from metallic to ionic are available at the interface and create unique reaction sites. We show herein how sites associated with a metal–ceria interface can dramatically change the reaction mechanism of the water–gas shift reaction (WGSR; CO + H2O!H2 + CO2). The WGSR is critical in the production of hydrogen. Multiple reaction mechanisms have been proposed. [3] In the redox mechanism, CO reacts with oxygen derived from the dissociation of H2O. In the associative process, the formation of a carbonaceous COxHy intermediate must precede the production of H2 and CO2. In situ studies are essential for the detection of surface species and active phases only present under the reaction conditions. [4] We present a combination of near-ambient-pressure X-ray photoelectron spectroscopy (NAP XPS), infrared reflection absorption spectroscopy (IRRAS), and density functional theory (DFT) calculations used to study the WGSR on CeOx nanoparticles deposited on Cu(111) and Au(111). Under WGSR conditions, adsorbed bent carboxylate (CO2 d� ) species were identified over both CeOx/Cu(111) and CeOx/ Au(111), with the ceria in a highly reduced state. By combining in situ experimental results with calculations, we

Using “Tender” X-ray Ambient Pressure X-Ray Photoelectron Spectroscopy as A Direct Probe of Solid-Liquid Interface

We report a new method to probe the solid-liquid interface through the use of a thin liquid layer on a solid surface. An ambient pressure XPS (AP-XPS) endstation that is capable of detecting high kinetic energy photoelectrons (7 keV) at a pressure up to 110 Torr has been constructed and commissioned. Additionally, we have deployed a “dip & pull” method to create a stable nanometers-thick aqueous electrolyte on platinum working electrode surface. Combining the newly constructed AP-XPS system, “dip & pull” approach, with a “tender” X-ray synchrotron source (2 keV–7 keV), we are able to access the interface between liquid and solid dense phases with photoelectrons and directly probe important phenomena occurring at the narrow solid-liquid interface region in an electrochemical system. Using this approach, we have performed electrochemical oxidation of the Pt electrode at an oxygen evolution reaction (OER) potential. Under this potential, we observe the formation of both Pt2+ and Pt4+ interfacial species on the Pt working electrode in situ. We believe this thin-film approach and the use of “tender” AP-XPS highlighted in this study is an innovative new approach to probe this key solid-liquid interface region of electrochemistry.

Direct Work Function Measurement by Gas Phase Photoelectron Spectroscopy and Its Application on PbS Nanoparticles

Work function is a fundamental property of a materials surface. It is playing an ever more important role in engineering new energy materials and efficient energy devices, especially in the field of photovoltaic devices, catalysis, semiconductor heterojunctions, nanotechnology, and electrochemistry. Using ambient pressure X-ray photoelectron spectroscopy (APXPS), we have measured the binding energies of core level photoelectrons of Ar gas in the vicinity of several reference materials with known work functions (Au(111), Pt(111), graphite) and PbS nanoparticles. We demonstrate an unambiguously negative correlation between the work functions of reference samples and the binding energies of Ar 2p core level photoelectrons detected from the Ar gas near the sample surface region. Using this experimentally determined linear relationship between the surface work function and Ar gas core level photoelectron binding energy, we can measure the surface work function of different materials under different gas environments. To demonstrate the potential applications of this ambient pressure XPS technique in nanotechnology and solar energy research, we investigate the work functions of PbS nanoparticles with various capping ligands: methoxide, mercaptopropionic acid, and ethanedithiol. Significant Fermi level position changes are observed for PbS nanoparticles when the nanoparticle size and capping ligands are varied. The corresponding changes in the valence band maximum illustrate that an efficient quantum dot solar cell design has to take into account the electrochemical effect of the capping ligand as well.

Direct observation of the energetics at a semiconductor/liquid junction by operando X-ray photoelectron spectroscopy

Photoelectrochemical (PEC) cells based on semiconductor/liquid interfaces provide a method of converting solar energy to electricity or fuels. Currently, the understanding of semiconductor/liquid interfaces is inferred from experiments and models. Operando ambient-pressure X-ray photoelectron spectroscopy (AP-XPS) has been used herein to directly characterize the semiconductor/liquid junction at room temperature under real-time electrochemical control. X-ray synchrotron radiation in conjunction with AP-XPS has enabled simultaneous monitoring of the solid surface, the solid/electrolyte interface, and the bulk electrolyte of a PEC cell as a function of the applied potential, U. The observed shifts in binding energy with respect to the applied potential have directly revealed ohmic and rectifying junction behavior on metallized and semiconducting samples, respectively. Additionally, the non-linear response of the core level binding energies to changes in the applied electrode potential has revealed the influence of defect-derived electronic states on the Galvani potential across the complete cell.

PbS Nanoparticles Capped with Tetrathiafulvalenetetracarboxylate: Utilizing Energy Level Alignment for Efficient Carrier Transport

We fabricate a field-effect transistor by covalently functionalizing PbS nanoparticles with tetrathiafulvalenetetracarboxylate. Following experimental results from cyclic voltammetry and ambient-pressure X-ray photoelectron spectroscopy, we postulate a near-resonant alignment of the PbS 1Sh state and the organic HOMO, which is confirmed by atomistic calculations. Considering the large width of interparticle spacing, we observe an abnormally high field-effect hole mobility, which we attribute to the postulated resonance. In contrast to nanoparticle devices coupled through common short-chained ligands, our system maintains a large degree of macroscopic order as revealed by X-ray scattering. This provides a different approach to the design of hybrid organic-inorganic nanomaterials, circumvents the problem of phase segregation, and holds for versatile ways to design ordered, coupled nanoparticle thin films.

Oxidation and reduction of size-selected subnanometer Pd clusters on Al2O3 surface.

In this paper, we investigate uniformly dispersed size-selected Pd(n) clusters (n = 4, 10, and 17) on alumina supports. We study the changes of clustered Pd atoms under oxidizing and reducing (O2 and CO, respectively) conditions in situ using ambient pressure XPS. The behavior of Pd in the clusters is quite different from that of Pd foil under the same conditions. For all Pd clusters, we observe only one Pd peak. The binding energy of this Pd 3d peak is ~1-1.4 eV higher than that of metallic Pd species and changes slightly in CO and O2 environments. On the Pd foil however many different Pd species co-exist on the surface and change their oxidation states under different conditions. We find that the Pd atoms in direct contact with Al2O3 differ in oxidation state from the surface Pd atoms in a foil under reaction conditions. Compared to previous literature, we find that Pd 3d peak positions are greatly influenced by the different types of Al2O3 supports due to the combination of both initial and final state effects.

Observing the Electrochemical Oxidation of Co Metal at the Solid/Liquid Interface Using Ambient Pressure X-ray Photoelectron Spectroscopy

Recent advances of ambient pressure X-ray photoelectron spectroscopy (AP-XPS) have enabled the chemical composition and the electrical potential profile at a liquid/electrode interface under electrochemical reaction conditions to be directly probed. In this work, we apply this operando technique to study the surface chemical composition evolution on a Co metal electrode in 0.1 M KOH aqueous solution under various electrical biases. It is found that an ∼12.2 nm-thick layer of Co(OH)2 forms at a potential of about -0.4 VAg/AgCl, and upon increasing the anodic potential to about +0.4 VAg/AgCl, this layer is partially oxidized into cobalt oxyhydroxide (CoOOH). A CoOOH/Co(OH)2 mixture layer is formed on the top of the electrode surface. Finally, the oxidized surface layer can be reduced to Co0 at a cathodic potential of -1.35 VAg/Cl. These observations indicate that the ultrathin layer containing cobalt oxyhydroxide is the active phase for oxygen evolution reaction (OER) on a Co electrode in an alkaline electrolyte, consistent with previous studies.

Direct Mapping of Band Positions in Doped and Undoped Hematite during Photoelectrochemical Water Splitting

Photoelectrochemical water splitting is a promising pathway for the direct conversion of renewable solar energy to easy to store and use chemical energy. The performance of a photoelectrochemical device is determined in large part by the heterogeneous interface between the photoanode and the electrolyte, which we here characterize directly under operating conditions using interface-specific probes. Utilizing X-ray photoelectron spectroscopy as a noncontact probe of local electrical potentials, we demonstrate direct measurements of the band alignment at the semiconductor/electrolyte interface of an operating hematite/KOH photoelectrochemical cell as a function of solar illumination, applied potential, and doping. We provide evidence for the absence of in-gap states in this system, which is contrary to previous measurements using indirect methods, and give a comprehensive description of shifts in the band positions and limiting processes during the photoelectrochemical reaction.