Stephen A. Shevlin

Band alignment of rutile and anatase TiO2

The most widely used oxide for photocatalytic applications owing to its low cost and high activity is TiO₂. The discovery of the photolysis of water on the surface of TiO₂ in 1972 launched four decades of intensive research into the underlying chemical and physical processes involved. Despite much collected evidence, a thoroughly convincing explanation of why mixed-phase samples of anatase and rutile outperform the individual polymorphs has remained elusive. One long-standing controversy is the energetic alignment of the band edges of the rutile and anatase polymorphs of TiO₂ (ref. ). We demonstrate, through a combination of state-of-the-art materials simulation techniques and X-ray photoemission experiments, that a type-II, staggered, band alignment of ~ 0.4 eV exists between anatase and rutile with anatase possessing the higher electron affinity, or work function. Our results help to explain the robust separation of photoexcited charge carriers between the two phases and highlight a route to improved photocatalysts.

Visible-light driven heterojunction photocatalysts for water splitting – a critical review

Solar driven catalysis on semiconductors to produce clean chemical fuels, such as hydrogen, is widely considered as a promising route to mitigate environmental issues caused by the combustion of fossil fuels and to meet increasing worldwide demands for energy. The major limiting factors affecting the efficiency of solar fuel synthesis include; (i) light absorption, (ii) charge separation and transport and (iii) surface chemical reaction; therefore substantial efforts have been put into solving these problems. In particular, the loading of co-catalysts or secondary semiconductors that can act as either electron or hole acceptors for improved charge separation is a promising strategy, leading to the adaptation of a junction architecture. Research related to semiconductor junction photocatalysts has developed very rapidly and there are a few comprehensive reviews in which the strategy is discussed (A. Kudo and Y. Miseki, Chemical Society Reviews, 2009, 38, 253–278, K. Li, D. Martin, and J. Tang, Chinese Journal of Catalysis, 2011, 32, 879–890, R. Marschall, Advanced Functional Materials, 2014, 24, 2421–2440). This critical review seeks to give an overview of the concept of heterojunction construction and more importantly, the current state-of-the art for the efficient, visible-light driven junction water splitting photo(electro)catalysts reported over the past ten years. For water splitting, these include BiVO4, Fe2O3, Cu2O and C3N4, which have attracted increasing attention. Experimental observations of the proposed charge transfer mechanism across the semiconductor/semiconductor/metal junctions and the resultant activity enhancement are discussed. In parallel, recent successes in the theoretical modelling of semiconductor electronic structures at interfaces and how these explain the functionality of the junction structures is highlighted.

Highly Efficient Photocatalytic H2 Evolution from Water using Visible Light and Structure‐Controlled Graphitic Carbon Nitride

The major challenge of photocatalytic water splitting, the prototypical reaction for the direct production of hydrogen by using solar energy, is to develop low-cost yet highly efficient and stable semiconductor photocatalysts. Herein, an effective strategy for synthesizing extremely active graphitic carbon nitride (g-C3N4) from a low-cost precursor, urea, is reported. The g-C3N4 exhibits an extraordinary hydrogen-evolution rate (ca. 20 000 μmol h−1 g−1 under full arc), which leads to a high turnover number (TON) of over 641 after 6 h. The reaction proceeds for more than 30 h without activity loss and results in an internal quantum yield of 26.5 % under visible light, which is nearly an order of magnitude higher than that observed for any other existing g-C3N4 photocatalysts. Furthermore, it was found by experimental analysis and DFT calculations that as the degree of polymerization increases and the proton concentration decreases, the hydrogen-evolution rate is significantly enhanced.

Strain and Orientation Modulated Bandgaps and Effective Masses of Phosphorene Nanoribbons

Passivated phosphorene nanoribbons, armchair (a-PNR), diagonal (d-PNR), and zigzag (z-PNR), were investigated using density functional theory. Z-PNRs demonstrate the greatest quantum size effect, tuning the bandgap from 1.4 to 2.6 eV when the width is reduced from 26 to 6 Å. Strain effectively tunes charge carrier transport, leading to a sudden increase in electron effective mass at +8% strain for a-PNRs or hole effective mass at +3% strain for z-PNRs, differentiating the (mh*/me*) ratio by an order of magnitude in each case. Straining of d-PNRs results in a direct to indirect band gap transition at either -7% or +5% strain and therein creates degenerate energy valleys with potential applications for valleytronics and/or photocatalysis.

Switching effective oxygen reduction and evolution performance by controlled graphitization of a cobalt–nitrogen–carbon framework system

We report a purposely designed route for the synthesis of a promising carbon-based electrocatalyst for both ORR (oxygen reduction reaction) and OER (oxygen evolution reaction) from zeolitic imidazolate frameworks (ZIFs). Firstly, precursor ZIFs are rationally designed with a blend of volatile zinc to induce porosity and stable cobalt to induce graphitic domains. Secondly, the self-modulated cobalt–nitrogen–carbon system (SCNCS) is shown to be an effective ORR catalyst after graphitization at mild temperatures. Finally, the best OER catalyst is developed by enhancing graphitization of the SCNCS. For the first time, solely by switching the graphitization conditions of SCNCS, excellent ORR or OER performance is realized. This approach not only opens up a simple protocol for simultaneous optimization of nitrogen doping and graphitization at controlled cobalt concentrations, but also provide a facile method of developing such active catalysts without the use of extensive synthesis procedures.

Flexible and Binder-Free Organic Cathode for High-Performance Lithium-Ion Batteries

Fabrication of a flexible organic electrode by growing polyimide nanoflakes on single-wall carbon nanotube films is presented. The flexible electrode exhibits high capacity and outstanding rate capability. This electrode is promising for the application in high-power flexible lithium-Ion batteries.

Coherent electron-phonon coupling and polaronlike transport in molecular wires

We present a technique to calculate the transport properties through one-dimensional models of molecular wires. The calculations include inelastic electron scattering due to electron-lattice interaction. The coupling between the electron and the lattice is crucial to determine the transport properties in one-dimensional systems subject to Peierls transition since it drives the transition itself. The electron-phonon coupling is treated as a quantum coherent process, in the sense that no random dephasing due to electron-phonon interactions is introduced in the scattering wave functions. We show that charge-carrier injection, even in the tunneling regime, induces lattice distortions localized around the tunneling electron. The transport in the molecular wire is due to polaronlike propagation. We show typical examples of the lattice distortions induced by charge injection into the wire. In the tunneling regime, the electron transmission is strongly enhanced in comparison with the case of elastic scattering through the undistorted molecular wire. We also show that although lattice fluctuations modify the electron transmission through the wire, the modifications are qualitatively different from those obtained by the quantum electron-phonon inelastic scattering technique. Our results should hold in principle for other one-dimensional atomic-scale wires subject to Peierls transitions.

Advances in computational studies of energy materials

We review recent developments and applications of computational modelling techniques in the field of materials for energy technologies including hydrogen production and storage, energy storage and conversion, and light absorption and emission. In addition, we present new work on an Sn2TiO4 photocatalyst containing an Sn(II) lone pair, new interatomic potential models for SrTiO3 and GaN, an exploration of defects in the kesterite/stannite-structured solar cell absorber Cu2ZnSnS4, and report details of the incorporation of hydrogen into Ag2O and Cu2O. Special attention is paid to the modelling of nanostructured systems, including ceria (CeO2, mixed CexOy and Ce2O3) and group 13 sesquioxides. We consider applications based on both interatomic potential and electronic structure methodologies; and we illustrate the increasingly quantitative and predictive nature of modelling in this field.

Fe2O3–TiO2 Nanocomposites for Enhanced Charge Separation and Photocatalytic Activity

Photocatalysis provides a cost effective method for both renewable energy synthesis and environmental purification. Photocatalytic activity is dominated by the material design strategy and synthesis methods. Here, for the first time, we report very mild and effective photo-deposition procedures for the synthesis of novel Fe2 O3 -TiO2 nanocomposites. Their photocatalytic activities have been found to be dramatically enhanced for both contaminant decomposition and photoelectrochemical water splitting. When used to decompose a model contaminant herbicide, 2,4-dichlorophenoxyacetic acid (2,4-D), monitored by both UV/Vis and total organic carbon (TOC) analysis, 10% Fe-TiO2 -H2 O displayed a remarkable enhancement of more than 200 % in the kinetics of complete mineralisation in comparison to the commercial material P25 TiO2 photocatalyst. Furthermore, the photocurrent is nearly double that of P25. The mechanism for this improvement in activity was determined using density functional theory (DFT) and photoluminescence. These approaches ultimately reveal that the photoelectron transfer is from TiO2 to Fe2 O3 . This favours O2 reduction which is the rate-determining step in photocatalytic environmental purification. This in situ charge separation also allows for facile migration of holes from the valence band of TiO2 to the surface for the expected oxidation reactions, leading to higher photocurrent and better photocatalytic activity.

Modeling Excited States in TiO2 Nanoparticles: On the Accuracy of a TD-DFT Based Description.

We have investigated the suitability of Time-Dependent Density Functional Theory (TD-DFT) to describe vertical low-energy excitations in naked and hydrated titanium dioxide nanoparticles. Specifically, we compared TD-DFT results obtained using different exchange-correlation (XC) potentials with those calculated using Equation-of-Motion Coupled Cluster (EOM-CC) quantum chemistry methods. We demonstrate that TD-DFT calculations with commonly used XC potentials (e.g., B3LYP) and EOM-CC methods give qualitatively similar results for most TiO2 nanoparticles investigated. More importantly, however, we also show that, for a significant subset of structures, TD-DFT gives qualitatively different results depending upon the XC potential used and that only TD-CAM-B3LYP and TD-BHLYP calculations yield results that are consistent with those obtained using EOM-CC theory. Moreover, we demonstrate that the discrepancies for such structures originate from a particular combination of defects that give rise to charge-transfer excitations, which are poorly described by XC potentials that do not contain sufficient Hartree–Fock like exchange. Finally, we consider that such defects are readily healed in the presence of ubiquitously present water and that, as a result, the description of vertical low-energy excitations for hydrated TiO2 nanoparticles is nonproblematic.