Stephen M. Mansell

Small Molecule Activation by Uranium Tris(aryloxides): Experimental and Computational Studies of Binding of N-2, Coupling of CO, and Deoxygenation Insertion of CO2 under Ambient Conditions

Previously unanticipated dinitrogen activation is exhibited by the well-known uranium tris(aryloxide) U(ODtbp)(3), U(OC(6)H(3)-Bu(t)(2)-2,6)(3), and the tri-tert-butyl analogue U(OTtbp)(3), U(OC(6)H(2)-Bu(t)(3)-2,4,6)(3), in the form of bridging, side-on dinitrogen complexes [U(OAr)(3)](2)(μ-η(2):η(2)-N(2)), for which the tri-tert-butyl N(2) complex is the most robust U(2)(N(2)) complex isolated to date. Attempted reduction of the tris(aryloxide) complex under N(2) gave only the potassium salt of the uranium(III) tetra(aryloxide) anion, K[U(OAr)(4)], as a result of ligand redistribution. The solid-state structure is a polymeric chain formed by each potassium cation bridging two arenes of adjacent anions in an η(6) fashion. The same uranium tris(aryloxides) were also found to couple carbon monoxide under ambient conditions to give exclusively the ynediolate [OCCO](2-) dianion in [U(OAr)(3)](2)(μ-η(1):η(1)-C(2)O(2)), in direct analogy with the reductive coupling recently shown to afford [U{N(SiMe(3))(2)}(3)](2)(μ-η(1):η(1)-C(2)O(2)). The related U(III) complexes U{N(SiPhMe(2))(2)}(3) and U{CH(SiMe(3))(2)}(3) however do not show CO coupling chemistry in our hands. Of the aryloxide complexes, only the U(OC(6)H(2)-Bu(t)(3)-2,4,6)(3) reacts with CO(2) to give an insertion product containing bridging oxo and aryl carbonate moieties, U(2)(OTtbp)(4)(μ-O)(μ-η(1):η(1)-O(2)COC(6)H(2)-Bu(t)(3)-2,4,6)(2), which has been structurally characterized. The presence of coordinated N(2) in [U(OTtbp)(3)](2)(N(2)) prevents the occurrence of any reaction with CO(2), underscoring the remarkable stability of the N(2) complex. The di-tert-butyl aryloxide does not insert CO(2), and only U(ODtbp)(4) was isolated. The silylamide also reacts with carbon dioxide to afford U(OSiMe(3))(4) as the only uranium-containing material. GGA and hybrid DFT calculations, in conjunction with topological analysis of the electron density, suggest that the U-N(2) bond is strongly polar, and that the only covalent U→N(2) interaction is π backbonding, leading to a formal (U(IV))(2)(N(2))(2-) description of the electronic structure. The N-N stretching wavenumber is preferred as a metric of N(2) reduction to the N-N bond length, as there is excellent agreement between theory and experiment for the former but poorer agreement for the latter due to X-ray crystallographic underestimation of r(N-N). Possible intermediates on the CO coupling pathway to [U(OAr)(3)](2)(μ-C(2)O(2)) are identified, and potential energy surface scans indicate that the ynediolate fragment is more weakly bound than the ancillary ligands, which may have implications in the development of low-temperature and pressure catalytic CO chemistry.

Iron(I) in Negishi Cross-Coupling Reactions

Herein we demonstrate both the importance of Fe(I) in Negishi cross-coupling reactions with arylzinc reagents and the isolation of catalytically competent Fe(I) intermediates. These complexes, [FeX(dpbz)(2)] [X = 4-tolyl (7), Cl (8a), Br (8b); dpbz = 1,2-bis(diphenylphosphino)benzene], were characterized by crystallography and tested for activity in representative reactions. The complexes are low-spin with no significant spin density on the ligands. While complex 8b shows performance consistent with an on-cycle intermediate, it seems that 7 is an off-cycle species.

Coordination Chemistry of N-Heterocyclic Stannylenes: A Combined Synthetic and Mössbauer Spectroscopy Study

The N-heterocyclic stannylenes (NHSns), [(Dipp) N(CH(2))(n)N(Dipp)S n] (Dipp = 2,6- (i)Pr(2)C(6)H(3); n = 2, 1; n = 3, 5) and [((t)Bu) N(CHMe)(2)N((t)Bu)S n] (10) are competent ligands toward a variety of transition metal centers, as seen in the complexes [W(CO)(5)·1] (2), [(OC)(4)Fe(μ-1)(2)Fe(CO)(4)] (3), [(OC)(4)Fe(μ-1)Fe(CO)(4)] (4), [Fe(CO)(4)·5](n) (6, n = 1 or 2), [(OC)(4)Fe(μ-5)Fe(CO)(4)] (7), [Ph(3)PPt(μ-1)(2)PtPPh(3)] (8), [Fe(CO)(4)·10] (11), and [(η(5)-C(5)H(5))(OC)(2)Mn·10] (12). X-ray crystallographic studies show that the NHSns are structurally largely unperturbed binding to the metal, but in contrast to the parent NHCs, NHSns often adopt a bridging position across dinuclear metal units. The balance between terminal and bridging positions for the stannylene is evidently closely balanced as shown by the observation of both monomers and dimers for 6 in the solid state and in solution. (119)Sn and (57)Fe Mössbauer spectroscopy of the complexes shows the tin atoms in such complexes to be consistent with electron deficient Sn(II) centers.

Synthesis and Structural Characterization of Tin Analogues of N-Heterocyclic Carbenes

The synthesis and X-ray crystal structures of five N-heterocyclic stannylenes are reported. These compounds, containing a variety of backbones, were prepared by the salt metathesis of the appropriate dilithiated diamide with SnCl(2) and show a high degree of thermal stability compared to the corresponding species with unsaturated backbones. If bulky diisopropylphenyl groups are attached to the nitrogen centers then the structures are monomeric, but when the less bulky mesityl groups are employed the solid-state structure was shown to be dimeric.

Syntheses and molecular structures of some saturated N-heterocyclic plumbylenes.

Cyclic diamino plumbylenes derived from saturated heterocycles are obtained from deprotonation of diamines and subsequent reaction with PbCl(2), or by reaction of a suitable diamine with Pb[N(SiMe(3))(2)](2). Single crystal X-ray studies have been used to probe the solid state structures of a range of these complexes and have shown the fine balance between monomer and dimer formation which is related to the bulk of the organic group attached to the nitrogen atoms. Dimerisation is also shown to effect structural changes within the core of the heterocyclic plumbylene.

White phosphorus as a ligand for the coinage metals

Reaction of equimolar quantities of MX (M = Au, Cu, X = Cl; M = Ag, X = OTf) and GaCl(3) in CH(2)Cl(2) with P(4) leads to phosphorus ligating a cationic coinage metal centre. For Cu and Ag, ion-contacted coordination polymers are formed; for Au, an ion-separated complex is observed that features the [Au(η(2)-P(4))(2)](+) cation, which is the first homoleptic Au-P(4) complex to be characterised in the condensed phase.

Racemic N-aryl bis(amidines) and bis(amidinates): on the trail of enantioselective organolanthanide catalysts

A series of racemic N-aryl-substituted trans-1,2-diaminocyclohexyl (t-1,2-DACH)-linked bis(amidines) were synthesised and their solution behaviour, and solid-state structures were investigated. The amidine functionalities within these compounds were extremely sterically hindered, with ortho-aryl substitution found to hinder N-Ar bond rotation. The results of these studies were used to rationalise the lack of reactivity of these compounds with [Y{N(SiMe(3))(2)}(3)]. Dilithiation of the t-1,2-DACH linked bis(amidines) did, however, proceed easily and the solution behaviour and solid-state structures of the resulting THF-solvated lithium amidinates were investigated. All the compounds showed similar structures in the solid-state, while NMR experiments indicated that the solid-state structures were likely to be maintained in solution. Attempted metathesis reactions with YCl(3) did not, however, yield the desired yttrium chloride complexes.

Characterizing pressure-induced uranium C-H agostic bonds

The diuranium(III) compound [UN′′2]2(μ-η6:η6-C6H6) (N′′=N(SiMe3)2) has been studied using variable, high-pressure single-crystal X-ray crystallography, and density functional theory. In this compound, the low-coordinate metal cations are coupled through π- and δ-symmetric arene overlap and show close metal=CH contacts with the flexible methyl CH groups of the sterically encumbered amido ligands. The metal–metal separation decreases with increasing pressure, but the most significant structural changes are to the close contacts between ligand CH bonds and the U centers. Although the interatomic distances are suggestive of agostic-type interactions between the U and ligand peripheral CH groups, QTAIM (quantum theory of atoms-in-molecules) computational analysis suggests that there is no such interaction at ambient pressure. However, QTAIM and NBO analyses indicate that the interaction becomes agostic at 3.2 GPa.

1,1- and 1,2-isomers of the diborane(4) compound B2{1,2-(NH)2C6H4}2 and a TCNQ Co-crystal of the 1,1-isomer

The synthesis and X-ray crystal structures of the diborane(4) isomers 1,1-B(2){1,2-(NH)(2)C(6)H(4)}(2) and 1,2-B(2){1,2-(NH)(2)C(6)H(4)}(2) are described together with the results of quantum chemical calculations which shed light on their relative stabilities and degree of aromaticity. Spectroscopic data are also provided for both isomers of the 4-methyl aryl derivative. The compound 1,1-B(2){1-O-2-(NH)C(6)H(4)}(2) has also been prepared and structurally characterised but no evidence was obtained for the corresponding 1,2-isomer. The compound 1,1-B(2){1,2-(NH)(2)C(6)H(4)}(2) forms a co-crystal with TCNQ, the structure of which is also reported.

Coordination chemistry of trimethylsilylphosphaalkyne: a phosphaalkyne bearing a reactive substituent.

Trimethylsilylphosphaalkyne binds readily to a variety of transition metals. Binding can take place using either the end-on or side-on mode and to either mononuclear or multinuclear metal complexes. The synthesis, structure and characterisation of eight such complexes, [Cp(2)Zr(PMe(3))(Me(3)SiC≡P)], [(C(6)F(5))(2)FB(C(6)F(4))PCSiMe(3))ZrCp(2)(PMe(3))], [(C(6)F(5))(2)XB(C(6)F(4))(ZrCp(2))(2)P(2)(CSiMe(3))(2)] (X = F/H), [(Me(3)Si-C≡P)(2)Mo(dppe)(2)], [CpMo(CO)(2)PC(SiMe(3))Mo(CO)(2)Cp], [(Ph(3)P)(2)Pt(Me(3)SiC≡P)], [{(dppe)Pd}(2)(Me(3)SiC≡P)] and [Pd(5)(PPh(3))(5)(Me(3)SiC≡P)(3)] are described together with attempts to desilylate some of these complexes.