Steven Antonie Willem Fokkenrood

Real-time lesion assessment using a novel combined ultrasound and radiofrequency ablation catheter

BACKGROUND Assessment of lesion size and transmurality is currently via indirect measures. Real-time image assessment may allow ablation parameters to be titrated to achieve transmurality and reduce recurrences due to incomplete lesions. OBJECTIVE The purpose of this study was to visualize lesion formation in real time using a novel combined ultrasound and externally irrigated ablation catheter. METHODS In an in vivo open-chest sheep model, 144 lesions were delivered in 11 sheep to both the atria and the ventricles, while lesion development was monitored in real time. Energy was delivered for a minimum of 15 seconds and a maximum of 60 seconds, with a range of powers, to achieve different lesion depths. Twenty-two lesions were also delivered endocardially. The ultrasound appearance was assessed and compared with the pathological appearance by four independent blinded observers. RESULTS For the ventricular lesions (n = 126), the mean power delivered was 6.1 ± 2.0 W, with a mean impedance of 394.7 ± 152.4 Ω and with an impedance drop of 136.4 ± 100.1 Ω. Lesion depths varied from 0 to 10 mm, with a median depth of 3.5 mm. At tissue depths up to 5 mm, changes in ultrasound contrast correlated well (r = 0.79, R(2) = 0.62) with tissue necrosis. The depth of ultrasound contrast correlated poorly with the depth of the zone of hemorrhage (r = 0.33, R(2) = 0.11), and impedance change correlated poorly with lesion depth (r = 0.29, R(2) = 0.08). CONCLUSION Real-time lesion assessment using high-frequency ultrasound integrated into an ablation catheter is feasible and allows differentiation between true necrosis and hemorrhage. This may lead to safer and more efficient power delivery, allowing more effective lesion formation.

Visualizing intramyocardial steam formation with a radiofrequency ablation catheter incorporating near-field ultrasound.

Steam pops are a risk of irrigated RF ablation even when limiting power delivery. There is currently no way to predict gas formation during ablation. It would be useful to visualize intramyocardial gas formation prior to a steam pop occurring using near‐field ultrasound integrated into a RF ablation catheter.

Near-Field Ultrasound Imaging During Radiofrequency Catheter Ablation: Tissue Thickness and Epicardial Wall Visualization and Assessment of Radiofrequency Ablation Lesion Formation and Depth

Background Safe and successful radiofrequency catheter ablation depends on creation of transmural lesions without collateral injury to contiguous structures. Near-field ultrasound (NFUS) imaging through transducers in the tip of an ablation catheter may provide important information about catheter contact, wall thickness, and ablation lesion formation. Methods and Results NFUS imaging was performed using a specially designed open-irrigated radiofrequency ablation catheter incorporating 4 ultrasound transducers. Tissue/phantom thickness was measured in vitro with varying contact angles. In vivo testing was performed in 19 dogs with NFUS catheters positioned in 4 chambers. Wall thickness measurements were made at 222 sites (excluding the left ventricle) and compared with measurements from intracardiac echocardiography. Imaging was used to identify the epicardium with saline infusion into the pericardial space at 39 sites. In vitro, the measured exceeded actual tissue/phantom thickness by 13% to 20%. In vivo, NFUS reliably visualized electrode-tissue contact, but sensitivity of epicardial imaging was 92%. The chamber wall thickness measured by NFUS correlated well with intracardiac echocardiography (r=0.86; P<0.0001). Sensitivity of lesion identification by NFUS was 94% for atrial and 95% for ventricular ablations. NFUS was the best parameter to predict lesion depth in right and left ventricle (r=0.47; P<0.0001; multiple regression P=0.0025). Lesion transmurality was correctly identified in 87% of atrial lesions. Conclusions NFUS catheter imaging reliably assesses electrode-tissue contact and wall thickness. Its use during radiofrequency catheter ablation may allow the operator to assess the depth of ablation required for transmural lesion formation to optimize power delivery.