Steven L. Neale

Three-dimensional nanopillar-array photovoltaics on low-cost and flexible substrates

Solar energy represents one of the most abundant and yet least harvested sources of renewable energy. In recent years, tremendous progress has been made in developing photovoltaics that can be potentially mass deployed. Of particular interest to cost-effective solar cells is to use novel device structures and materials processing for enabling acceptable efficiencies. In this regard, here, we report the direct growth of highly regular, single-crystalline nanopillar arrays of optically active semiconductors on aluminium substrates that are then configured as solar-cell modules. As an example, we demonstrate a photovoltaic structure that incorporates three-dimensional, single-crystalline n-CdS nanopillars, embedded in polycrystalline thin films of p-CdTe, to enable high absorption of light and efficient collection of the carriers. Through experiments and modelling, we demonstrate the potency of this approach for enabling highly versatile solar modules on both rigid and flexible substrates with enhanced carrier collection efficiency arising from the geometric configuration of the nanopillars.

Parallel single-cell light-induced electroporation and dielectrophoretic manipulation

Electroporation is a common technique for the introduction of exogenous molecules across the, otherwise, impermeant cell membrane. Conventional techniques are limited by either low throughput or limited selectivity. Here we present a novel technique whereby we use patterned light to create virtual electrodes which can induce the parallel electroporation of single cells. This technique seamlessly integrates with optoelectronic tweezers to provide a single cell manipulation platform as well. We present evidence of parallel, single cell electroporation using this method through use of fluorescent dyes and dielectrophoretic responses. Additionally, through the use of integrated microfluidic channels, we show that cells remain viable following treatment in the device. Finally, we determine the optimal field dosage to inject propidium iodide into a HeLa cell and maintain cellular viability.

NanoPen: Dynamic, Low-Power, and Light-Actuated Patterning of Nanoparticles

We introduce NanoPen, a novel technique for low optical power intensity, flexible, real-time reconfigurable, and large-scale light-actuated patterning of single or multiple nanoparticles, such as metallic spherical nanocrystals, and one-dimensional nanostructures, such as carbon nanotubes. NanoPen is capable of dynamically patterning nanoparticles over an area of thousands of square micrometers with light intensities <10 W/cm(2) (using a commercial projector) within seconds. Various arbitrary nanoparticle patterns and arrays (including a 10 x 10 array covering a 0.025 mm(2) area) are demonstrated using this capability. One application of NanoPen is presented through the creation of surface-enhanced Raman spectroscopy hot-spots by patterning gold nanoparticles of 90 nm diameter with enhancement factors exceeding 10(7) and picomolar concentration sensitivities.

Motile and non-motile sperm diagnostic manipulation using optoelectronic tweezers

Optoelectronic tweezers was used to manipulate human spermatozoa to determine whether their response to OET predicts sperm viability among non-motile sperm. We review the electro-physical basis for how live and dead human spermatozoa respond to OET. The maximal velocity that non-motile spermatozoa could be induced to move by attraction or repulsion to a moving OET field was measured. Viable sperm are attracted to OET fields and can be induced to move at an average maximal velocity of 8.8 ± 4.2 µm s(-1), while non-viable sperm are repelled to OET, and are induced to move at an average maximal velocity of -0.8 ± 1.0 µm s(-1). Manipulation of the sperm using OET does not appear to result in increased DNA fragmentation, making this a potential method by which to identify viable non-motile sperm for assisted reproductive technologies.

Trap profiles of projector based optoelectronic tweezers (OET) with HeLa cells

In this paper we present trap profile measurements for HeLa cells in Optoelectronic Tweezers (OET) based on a data projector. The data projector is used as a light source to illuminate amorphous Si creating virtual electrodes which are used to trap particles through dielectrophoresis. We show that although the trap stiffness is typically greater at the edges of the optical spot it is possible to create a trap with constant trap stiffness by reducing the traps size until it is similar to the object being trapped. We have successfully created a trap for HeLa cells with a constant trap stiffness of 3 x 10(-6) Nm-1 (capable of moving the cell up to 50 microms-1) with a 12 microm diameter trap. We also calculate the depth of the potential well that the cell will experience due to the trap and find that it to be 1.6 x 10(-16)J (4 x 10(4) kBT).

Miniaturized optoelectronic tweezers controlled by GaN micro-pixel light emitting diode arrays.

A novel, miniaturized optoelectronic tweezers (OET) system has been developed using a CMOS-controlled GaN micro-pixelated light emitting diode (LED) array as an integrated micro-light source. The micro-LED array offers spatio-temporal and intensity control of the emission pattern, enabling the creation of reconfigurable virtual electrodes to achieve OET. In order to analyse the mechanism responsible for particle manipulation in this OET system, the average particle velocity, electrical field and forces applied to the particles were characterized and simulated. The capability of this miniaturized OET system for manipulating and trapping multiple particles including polystyrene beads and live cells has been successfully demonstrated.

Light-actuated digital microfluidics for large-scale, parallel manipulation of arbitrarily sized droplets

We report on a new light-actuated digital microfluidics device which is capable of using on demand, ‘virtual’ electrodes formed by a data projector to enable large-scale, parallel manipulation of arbitrarily sized droplets. The device features a thin, high-quality Al2O3 film deposited via atomic layer deposition (ALD) which allows aggressive scaling of the dielectric thickness, while maintaining high device reliability. We demonstrate the splitting, merging and parallel manipulation of droplets at high actuation speeds (2 cm/s). Due to the thin ALD dielectric layer, this high actuation speed is achieved at 85x lower optical power and 5x lower voltage than our previous device.

Optoelectronic tweezers system for single cell manipulation and fluorescence imaging of live immune cells.

A compact optoelectronic tweezers system for combined cell manipulation and analysis is presented. CMOS-controlled gallium nitride micro-LED arrays are used to provide simultaneous spatio-temporal control of dielectrophoresis traps within an optoelectronic tweezers device and fluorescence imaging of contrasting dye labelled cells. This capability provides direct identification, selection and controlled interaction of single T-lymphocytes and dendritic cells. The trap strength and profile for two emission wavelengths of micro-LED array have been measured and a maximum trapping force of 13.1 and 7.6 pN was achieved for projected micro-LED devices emitting at λmax 520 and 450 nm, respectively. A potential application in biological research is demonstrated through the controlled interaction of live immune cells where there is potential for this method of OET to be implemented as a compact device.

Parallel assembly of nanowires using lateral-field optoelectronic tweezers

We report on the parallel manipulation and assembly of nanowires using paired virtual optical tips projected on lateral-field optoelectronic tweezers. Precise position and angular control has been demonstrated on four 80-nm-diameter silver nanowires.

Trapping and manipulation of microparticles using laser-induced convection currents and photophoresis.

In this work we demonstrate optical trapping and manipulation of microparticles suspended in water due to laser-induced convection currents. Convection currents are generated due to laser light absorption in an hydrogenated amorphous silicon (a:Si-H) thin film. The particles are dragged towards the beams center by the convection currents (Stokes drag force) allowing trapping with powers as low as 0.8 mW. However, for powers >3 mW trapped particles form a ring around the beam due to two competing forces: Stokes drag and thermo-photophoretic forces. Additionally, we show that dynamic beam shaping can be used to trap and manipulate multiple particles by photophotophoresis without the need of lithographically created resistive heaters.