Stevo Najman

A study of HAp/PLLA composite as a substitute for bone powder, using FT-IR spectroscopy.

Chemically synthesized hydroxyapatite/poly-L-lactide (HAp/PLLA) composite biomaterial was studied in vivo. The biocomposite was implanted into Balb/c Singen mice and after 1 and 3 weeks removed from their organisms and analyzed by the FT-IR spectroscopy. After 1 week of testing in vivo the implanted sample gave a spectrum in which absorption bands arising from newly formed functional groups of amine and peptide can be seen. After 3 weeks, a spectrum with pronounced absorption bands at 3420 and 1650cm(-1) assigned to newly generated collagen, a component of the extracellular connective-tissue matrix, was registered. Also, decrease of the intensity absorption band at 1760cm(-1) originating from the C=O group of PLLA indicates bioresorption of the PLLA used. Analysis of the microstructure of the sample surface by scanning electron microscopy before and after implantation revealed bioresorption of the PLLA polymer phase and generation of collagen fibers at the sites of implanted bioresorptive PLLA. A mixture of autologous bone powder and HAp/PLLA biocomposite was also examined. After implantation, the same final products as in the case of HAp/PLLA composite biomaterial used alone were found.

REVERSAL OF EXPERIMENTAL MYOGLOBINURIC ACUTE RENAL FAILURE WITH BIOFLAVONOIDS FROM SEEDS OF GRAPE

Rhabdomyolysis may account for about 10% of all cases of acute renal failure (ARF). This study was performed to explore the protective influence of proanthocyanidins from seeds of grape in an experimental model of myoglobinuric ARF. Rats were injected with 50% glycerol (8 mL/Kg, im) followed immediately and daily in the next three days by ip proanthocyanidins (20 mg/kg) or saline. After 96 h rats were sacrificed and kidney morphology, kidney cortex peptidase activities, and malondialdehyde (MDA) content were determined. A moderate renal failure was produced by glycerol injection with blood urea of 31.8 ± 11.0 vs. 7.68 ± 0.24 mmol/L, and serum creatinine of 153.6 ± 38.2 vs. 39.6 ± 9.0 μmol/L, in glycerol-induced ARF vs. control rats, respectively. Rats that received proanthocyanidins in addition to glycerol had significantly lower (p < 0.01) blood urea and serum creatinine levels compared to those receiving glycerol alone. These functional differences between the glycerol and glycerol plus proanthocianidins groups were also confirmed histologically. Kidney cortex dipeptidylpeptidase IV (DPP IV) activity was not significantly changed in glycerol-induced ARF, however, markedly increased after proanthocyanidins treatment. Kidney cortex malondialdehyde content was found significantly increased in glycerol-induced ARF over control level, and was markedly reduced by proanthocyanidin treatment. Taken together, these results provide strong evidence for the protective role of proanthocyanidins from seeds of grape in glycerol-induced ARF. The effect is probably due to the antioxidant activity of proanthocyanidins and to increased expression of kidney cortex DPP IV with effective degradation of TNF-α. This may provide therapeutic opportunities of preventing and/or treating myoglobinuric ARF in humans.

Repair of bone tissue affected by osteoporosis with hydroxyapatite-poly-L-lactide (HAp-PLLA) with and without blood plasma

The aim of this study is to examine the reparatory ability of the synthetic biomaterial hydroxyapatite-poly-L-lactide (HAp-PLLA), the replacement of alveolar ridge, and rehabilitation of bone defects caused by osteoporosis, in an experimental group of animals. The experiments are performed on syngeneic Sprague Dawley rats. Osteoporosis is induced by glucocorticoids in rats during a 12-week period. After this, the experimental group of animals is divided into five subgroups. An artificial defect is made in the alveolar bone on the left side of the mandible. In one group of animals, the defect is left to heal by itself, while in other groups, pure HAp-PLLA or one mixed with plasma is implanted. The best results are achieved by the implantation of the HAp-PLLA composite biomaterial mixed with autologous plasma. Formation of a new mandibular bone is seen, growing intensely, leading to rapid osteogenesis.

Addition of blood to a phycogenic bone substitute leads to increased in vivo vascularization

The present study aimed to analyze the effects of the addition of blood to the phycogenic bone substitute Algipore(®) on the severity of in vivo tissue reaction. Initially, Fourier-transform infrared spectroscopy (FTIR) of the bone substitute was conducted to analyze its chemical composition. The subcutaneous implantation model in Balb/c mice was then applied for up to 30 d to analyze the tissue reactions on the basis of specialized histochemical, immunohistochemical, and histomorphometrical methods. The data of the FTIR analysis showed that the phycogenic bone substitute material is mainly composed of hydroxyapatite with some carbonate content. The in vivo analyses revealed that the addition of blood to Algipore(®) had a major impact on both angiogenesis and vessel maturation. The higher vascularization seemed to be based on significantly higher numbers of multinucleated TRAP-positive cells. However, mostly macrophages and a relatively low number of multinucleated giant cells were involved in the tissue reaction to Algipore(®). The presented data show that the addition of blood to a bone substitute impacts the tissue reaction to it. In particular, the immune response and the vascularization were influenced, and these are believed to have a major impact on the regenerative potential of the process of bone tissue regeneration.

Osteogenic potential of in vitro osteo-induced adipose-derived mesenchymal stem cells combined with platelet-rich plasma in an ectopic model

PurposeThe osteogenic potential of in vitro osteo-induced adipose-derived mesenchymal stem cells (ADSCs) combined with platelet-rich plasma (PRP) and implanted on bone mineral matrix (BMM) carrier was examined in a subcutaneous model in Balb/c mice.MethodsIn vitro osteogenic differentiation of ADSCs was monitored by relative bone-related gene expression and osteocalcin expression at the third, seventh and 15th day. Test implants consisting of in vitro osteo-induced ADSCs, PRP and BMM (OPC implants) and control implants consisting of PRP and BMM (PC implants) were examined. The relative expression of the bone-related genes encoding osterix, osteocalcin, collagen type I α1 and alkaline phosphatase was examined in implants extracted at one, two, four and eight weeks. Histochemical, immunohistochemical and histomorphometric analyses of implants extracted at two and eight weeks were performed.ResultsThe highest relative expression of bone-related genes and osteocalcin expression was found at the 15th day of in vitro osteogenic induction of the ADSCs. Permanent and continuous increased expression of bone-related genes was noticed in OPC implants at eight weeks. Expression peaks of bone-related genes in PC implants were at two and four weeks, but they significantly decreased at eight weeks. The signs of resorption, formation of callus-like tissue positive for osteocalcin and increased presence of bone cells were found in OPC implants compared with PC implants. A higher percentage of infiltrated tissue and vascularisation was found in OPC than in PC implants.ConclusionsThe combination of in vitro osteo-induced ADSCs and PRP on BMM carrier represents a promising approach for bone regeneration.

Analysis of In Vivo Substitution of Bone Tissue by HAp/PLLA Composite Biomaterial with PLLA of Different Molecular Weights Using FTIR Spectroscopy

Hydroxyapatite/poly-L-lactide (HAp/PLLA) composite biomaterial with PLLA of 50,000 and 430,000 g/mole molecular weight was studied in vivo. The biocomposite with PLLA of both molecular weights was implanted into mice and after 1 and 3 weeks removed from their organisms and analyzed by the FT-IR spectroscopy. After one week of testing in vivo, the implanted samples gave spectra in which absorption bands arising from new-formed functional groups of amine and peptide can be seen. Analysis of the spectra revealed faster formation of peptide compounds when the biocomposite with PLLA of lower molecular weight was used. After 3 weeks, the spectra of the biocomposite of both compositions were registered with pronounced absorption bands at about 3420 and 1650 cm -1 assigned to new-generated collagen, a component of the extracellular connective-tissue matrix. Also, in the case of the biocomposite sample with PLLA of lower molecular weight, disappearance of the previously present absorption band at about 1760 cm -1 originating from the C=O group of PLLA indicates complete bioresorption of the PLLA used. Analysis of the microstructures of the sample surfaces by scanning electron microscopy before and after implantation revealed bioresorption of the PLLA polymer phase in the system with PLLA of lower molecular weight and generation of collagen fibers at the sites of implanted bioresorptive PLLA. A mixture of autologous bone powder and HAp/PLLA biocomposite was also examined. After implantation, the same final products as in the case of HAp/PLLA composite biomaterial alone were found.

Instrumental methods and techniques for structural and physicochemical characterization of biomaterials and bone tissue: A review

A review of recent advances in instrumental methods and techniques for structural and physicochemical characterization of biomaterials and bone tissue is presented in this paper. In recent years, biomaterials attracted great attention primarily because of the wide range of biomedical applications. This paper focuses on the practical aspects of instrumental methods and techniques that were most often applied (X-ray methods, vibrational spectroscopy (IR and Raman), magnetic-resonance spectroscopy (NMR and ESR), mass spectrometry (MS), atomic absorption spectrometry (AAS) and inductively coupled plasma-atomic emission spectrometry (ICP-AES), thermogravimetry (TG), differential thermal analysis (DTA) and differential scanning calorimetry (DSC), scanning electron microscopy (SEM), transmission electron microscopy (TEM)) in the structural investigation and physicochemical characterization of biomaterials and bone tissue. The application of some other physicochemical methods was also discussed. Hands-on information is provided about these valuable research tools, emphasizing practical aspects such as typical measurement conditions, their limitations and advantages, interpretation of results and practical applications.

Analysis of the in vitro degradation and the in vivo tissue response to bi-layered 3D-printed scaffolds combining PLA and biphasic PLA/bioglass components – Guidance of the inflammatory response as basis for osteochondral regeneration

The aim of the present study was the in vitro and in vivo analysis of a bi-layered 3D-printed scaffold combining a PLA layer and a biphasic PLA/bioglass G5 layer for regeneration of osteochondral defects in vivo Focus of the in vitro analysis was on the (molecular) weight loss and the morphological and mechanical variations after immersion in SBF. The in vivo study focused on analysis of the tissue reactions and differences in the implant bed vascularization using an established subcutaneous implantation model in CD-1 mice and established histological and histomorphometrical methods. Both scaffold parts kept their structural integrity, while changes in morphology were observed, especially for the PLA/G5 scaffold. Mechanical properties decreased with progressive degradation, while the PLA/G5 scaffolds presented higher compressive modulus than PLA scaffolds. The tissue reaction to PLA included low numbers of BMGCs and minimal vascularization of its implant beds, while the addition of G5 lead to higher numbers of BMGCs and a higher implant bed vascularization. Analysis revealed that the use of a bi-layered scaffold shows the ability to observe distinct in vivo response despite the physical proximity of PLA and PLA/G5 layers. Altogether, the results showed that the addition of G5 enables to reduce scaffold weight loss and to increase mechanical strength. Furthermore, the addition of G5 lead to a higher vascularization of the implant bed required as basis for bone tissue regeneration mediated by higher numbers of BMGCs, while within the PLA parts a significantly lower vascularization was found optimally for chondral regeneration. Thus, this data show that the analyzed bi-layered scaffold may serve as an ideal basis for the regeneration of osteochondral tissue defects. Additionally, the results show that it might be able to reduce the number of experimental animals required as it may be possible to analyze the tissue response to more than one implant in one experimental animal.

Chemopreventive potential of alpha lipoic acid in the treatment of colon and cervix cancer cell lines.

OBJECTIVES The nuclear factor κB regulates the expression of genes involved in many processes that play a key role in the development and progression of cancer. The aim of this study was to examine the influence of the alpha lipoic acid in the chemoprevention of colon and cervix carcinoma in vitro. BACKGROUND In recent years, special attention has been paid to the potential chemopreventive properties of antioxidants. There are no published data on the impact of alpha lipoc acid of chemoprevention of cervix and colon cancer. METHODS We examined the effect of alpha lipoic acid alone or in combination with cisplatin and 5-fluorouracil on proliferation of the two cell lines, HeLa (human cervical carcinoma cells) and Caco-2 (human colon cancer cells) by MTT test. The measurement of the level of transcription factor NF-κB was also performed in the cells of both cell lines. RESULTS At least one of the mechanisms of the antiproliferative and/or cytotoxic effect of alpha lipoic acid on Caco-2 and HeLa cells at high concentrations, the transcription factor NF-κB, may be involved, as well as the products of transcription of genes that are under its control. CONCLUSION The alpha lipoic acid has proven to be a promising candidate in the combat arena against cancer (Tab. 4, Ref. 31).

Stem Cell-Based Dental Tissue Engineering

The development of biological and biomaterial sciences profiled tissue engineering as a new and powerful tool for biological replacement of organs. The combination of stem cells and suitable scaffolds is widely used in experiments today, in order to achieve partial or whole organ regeneration. This review focuses on the use of tissue engineering strategies in tooth regeneration, using stem cells and stem cells/scaffold constructs. Although whole tooth regeneration is still not possible, there are promising results. However, to achieve this goal, it is important to understand and further explore the mechanisms underlying tooth development. Only then will we be able to mimic the natural processes with the use of stem cells and tissue engineering techniques.