Stuart J. Rowan

Optically healable supramolecular polymers

Polymers with the ability to repair themselves after sustaining damage could extend the lifetimes of materials used in many applications. Most approaches to healable materials require heating the damaged area. Here we present metallosupramolecular polymers that can be mended through exposure to light. They consist of telechelic, rubbery, low-molecular-mass polymers with ligand end groups that are non-covalently linked through metal-ion binding. On exposure to ultraviolet light, the metal–ligand motifs are electronically excited and the absorbed energy is converted into heat. This causes temporary disengagement of the metal–ligand motifs and a concomitant reversible decrease in the polymers’ molecular mass and viscosity, thereby allowing quick and efficient defect healing. Light can be applied locally to a damage site, so objects can in principle be healed under load. We anticipate that this approach to healable materials, based on supramolecular polymers and a light–heat conversion step, can be applied to a wide range of supramolecular materials that use different chemistries.

Using the dynamic bond to access macroscopically responsive structurally dynamic polymers

New materials that have the ability to reversibly adapt to their environment and possess a wide range of responses ranging from self-healing to mechanical work are continually emerging. These adaptive systems have the potential to revolutionize technologies such as sensors and actuators, as well as numerous biomedical applications. We will describe the emergence of a new trend in the design of adaptive materials that involves the use of reversible chemistry (both non-covalent and covalent) to programme a response that originates at the most fundamental (molecular) level. Materials that make use of this approach - structurally dynamic polymers - produce macroscopic responses from a change in the materials molecular architecture (that is, the rearrangement or reorganization of the polymer components, or polymeric aggregates). This design approach requires careful selection of the reversible/dynamic bond used in the construction of the material to control its environmental responsiveness.

Stimuli-Responsive Polymer Nanocomposites Inspired by the Sea Cucumber Dermis

Sea cucumbers, like other echinoderms, have the ability to rapidly and reversibly alter the stiffness of their inner dermis. It has been proposed that the modulus of this tissue is controlled by regulating the interactions among collagen fibrils, which reinforce a low-modulus matrix. We report on a family of polymer nanocomposites, which mimic this architecture and display similar chemoresponsive mechanic adaptability. Materials based on a rubbery host polymer and rigid cellulose nanofibers exhibit a reversible reduction by a factor of 40 of the tensile modulus, for example, from 800 to 20 megapascals (MPa), upon exposure to a chemical regulator that mediates nanofiber interactions. Using a host polymer with a thermal transition in the regime of interest, we demonstrated even larger modulus changes (4200 to 1.6 MPa) upon exposure to emulated physiological conditions.

Supramolecular gels formed from multi-component low molecular weight species.

Low molecular weight supramolecular gels consist of small molecules (gelators) that in an appropriate solvent self-assemble into nano- or micro-scale network structures resulting in the formation of a gel. Most supramolecular gels consist of two parts, namely the solvent and the gelator. However, the concept of multi-component supramolecular gels, in which more than one compound is added to the solvent, offers a facile way (e.g. by changing the ratio of the different components) to tailor the properties of the gel. The simplest multi-component gels consist of two components added to the solvent and are the most widely studied to date. There are three general classes of such multi-component gels that have been investigated. The first class requires all the added components to access the gel; that is, no component forms a gel on its own. A second class uses two (or more) gelators which can either co-assemble or self-sort into distinct assemblies and the final class consists of one (or more) gelator and one (or more) non-gelling additive which can impact the assembly process of the gelator and therefore the gels properties.

A Healable Supramolecular Polymer Blend Based on Aromatic π−π Stacking and Hydrogen-Bonding Interactions

An elastomeric, healable, supramolecular polymer blend comprising a chain-folding polyimide and a telechelic polyurethane with pyrenyl end groups is compatibilized by aromatic pi-pi stacking between the pi-electron-deficient diimide groups and the pi-electron-rich pyrenyl units. This interpolymer interaction is the key to forming a tough, healable, elastomeric material. Variable-temperature FTIR analysis of the bulk material also conclusively demonstrates the presence of hydrogen bonding, which complements the pi-pi stacking interactions. Variable-temperature SAXS analysis shows that the healable polymeric blend has a nanophase-separated morphology and that the X-ray contrast between the two types of domain increases with increasing temperature, a feature that is repeatable over several heating and cooling cycles. A fractured sample of this material reproducibly regains more than 95% of the tensile modulus, 91% of the elongation to break, and 77% of the modulus of toughness of the pristine material.

A versatile approach for the processing of polymer nanocomposites with self-assembled nanofibre templates

The incorporation of nanoparticles into polymers is a design approach that is used in many areas of materials science. The concept is attractive because it enables the creation of materials with new or improved properties by mixing multiple constituents and exploiting synergistic effects. One important technological thrust is the development of structural materials with improved mechanical and thermal characteristics. Equally intriguing is the possibility to design functional materials with unique optical or electronic properties, catalytic activity or selective permeation. The broad technological exploitation of polymer nanocomposites is, however, stifled by the lack of effective methods to control nanoparticle dispersion. We report a simple and versatile process for the formation of homogeneous polymer/nanofibre composites. The approach is based on the formation of a three-dimensional template of well-individualized nanofibres, which is filled with any polymer of choice. We demonstrate that this template approach is broadly applicable and allows for the fabrication of otherwise inaccessible nanocomposites of immiscible components.

Thermo-, photo-, and chemo-responsive shape-memory properties from photo-cross-linked metallo-supramolecular polymers.

Films exhibiting multiresponsive shape-memory properties have been accessed using covalently cross-linked metallo-supramolecular polymers. Low molecular weight poly(butadiene) was end-capped with 4-oxy-2,6-bis(N-methylbenzimidazolyl)pyridine (-OMebip) ligands that upon addition of metal salts spontaneously formed high molecular weight metallo-supramolecular polymers. The addition of a tetra-functional thiol along with a photoinitiator results in mechanically stable films via solution-casting. These films consist of a soft poly(butadiene) phase and a hard metal-ligand phase. Photo-cross-linking of the poly(butadiene) soft phase, via the thiol-ene reaction, upon exposure to relatively low intensity light, allows access to a diverse range of permanent shapes. Investigations into the temporary shape fixing and recovery of these materials were undertaken to determine the effects of cross-link density and the nature of the metal salts. The key component in fixing and releasing the temporary shape is the metal-ligand hard phase, and as such any stimulus that can disrupt this phase (light, heat, or chemicals) can be used to create the temporary shape and induce its recovery back to the permanent shape.

A self-repairing, supramolecular polymer system: healability as a consequence of donor–acceptor π–π stacking interactions

A novel supramolecular polymer system, in which the terminal pyrenyl groups of a polyamide intercalate into the chain-folds of a polyimide via electronically-complementary pi-pi stacking, shows both enhanced mechanical properties relative to those of its individual components and facile healing characteristics as a result of the thermoreversibility of non-covalent interactions.

High-strength, healable, supramolecular polymer nanocomposites

A supramolecular polymer blend, formed via π-π interactions between a π-electron rich pyrenyl end-capped oligomer and a chain-folding oligomer containing pairs of π-electron poor naphthalene-diimide (NDI) units, has been reinforced with cellulose nanocrystals (CNCs) to afford a healable nanocomposite material. Nanocomposites with varying weight percentage of CNCs (from 1.25 to 20.0 wt %) within the healable supramolecular polymeric matrix have been prepared via solvent casting followed by compression molding, and their mechanical properties and healing behavior have been evaluated. It is found that homogeneously dispersed films can be formed with CNCs at less than 10 wt %. Above 10 wt % CNC heterogeneous nanocomposites were obtained. All the nanocomposites formed could be rehealed upon exposure to elevated temperatures although, for the homogeneous films, it was found that the healing rate was reduced with increasing CNC content. The best combination of healing efficiency and mechanical properties was obtained with the 7.5 wt % CNC nanocomposite which exhibited a tensile modulus enhanced by as much as a factor of 20 over the matrix material alone and could be fully rehealed at 85 °C within 30 min. Thus it is demonstrated that supramolecular nanocomposites can afford greatly enhanced mechanical properties relative to the unreinforced polymer, while still allowing efficient thermal healing.

Polymer Nanocomposites with Nanowhiskers Isolated from Microcrystalline Cellulose

The ability to produce polymer nanocomposites, which comprise a percolating, three-dimensional network of well-individualized nanofibers, is important to maximize the reinforcing effect of the nanofibers. While microcrystalline cellulose (MCC) has been previously shown to improve the mechanical properties of polymer composites, the formation of fibrous percolating networks within the nanocomposites has been stifled. Through the utilization of a template approach, nanocomposites based on an ethylene oxide/epichlorohydrin copolymer and nanowhiskers isolated from MCC were produced that display the maximum mechanical reinforcement predicted by the percolation model.