Su Hyun Seok

In vivo absorption and disposition of α-cedrene, a sesquiterpene constituent of cedarwood oil, in female and male rats

This study aimed to evaluate the potential of α-cedrene as a new anti-obesity drug by characterizing absorption, metabolism and pharmacokinetics in rats. α-Cedrene was administered intravenously (10 and 20 mg/kg) and orally (50 and 100 mg/kg) to female and male Sprague-Dawley rats. Blood, tissues, urine, and feces were collected at predetermined times. α-Cedrene concentrations were determined by a validated gas chromatography-tandem mass spectrometry (GC-MS/MS). A gas chromatography-mass selective detection (GC-MSD) method was used to identify the major metabolite. After i.v. injection, α-cedrene exhibited a rapid clearance (98.4-120.3 ml/min/kg), a large distribution volume (35.9-56.5 l/kg), and a relatively long half-life (4.0-6.4 h). Upon oral administration, it was slowly absorbed (Tmax = 4.4 h) with bioavailability of 48.7-84.8%. No gender differences were found in its pharmacokinetics. Upon oral administration, α-cedrene was highly distributed to tissues, with the tissue-to-plasma partition coefficients (Kp) far greater than unity for all tissues. In particular, its distribution to lipid was notably high (Kp = 132.0) compared to other tissues. A mono-hydroxylated metabolite was identified as a preliminary metabolite in rat plasma. These results suggest that α-cedrene has the favorable pharmacokinetic characteristics to be further tested as an anti-obesity drug in clinical studies.

Effect of Process Parameters on Formation and Aggregation of Nanoparticles Prepared with a Shirasu Porous Glass Membrane

The objectives of this study were to prepare itraconazole (ITZ) nanoparticles using a Shirasu porous glass (SPG) membrane and to characterize the effects of diverse preparation parameters on the physical stability of nanoparticles. SPG membrane technology was used for the antisolvent precipitation method. The preparation of nanoparticles was carried out over a wide range of continuous-phase factors (type of surfactant, surfactant concentration), dispersed-phase factors (solvent type, solvent volume used to dissolve ITZ), and technical factors (pressure, membrane pore size, stirring speed in the continuous phase, temperature). Improved physical stability of nanoparticles was observed when surfactant with a lower molecular weight and higher hydrophilic segment ratio was used. The water miscibility of the solvent also had an effect on the physical stability. N,N-Dimethylacetamide contributed to creating a well-rounded shape and narrow size distribution due to high miscibility. Concentration of the surfactant and solvent volume used for dissolving ITZ were related to instability of nanoparticles, resulting from depletion attraction and Ostwald ripening. In addition to these factors, technical factors changed the environment surrounding ITZ nanoparticles, such as the physicochemical equilibrium between surfactant and ITZ nanoparticles. Therefore, the appropriate continuous-phase factors, dispersed-phase factors, and technical factors should be maintained for stabilizing ITZ nanoparticles.

Percutaneous Absorption, Disposition, and Exposure Assessment of Homosalate, a UV Filtering Agent, in Rats

Homosalate (HMS) is an ultraviolet (UV) filtering agent used in sunscreens and other cosmetics for skin protection purposes. Despite the widespread use of these products, absorption, disposition, and in vivo endocrine disrupting potential of HMS have not been characterized. Thus, the aim of this study was to examine the percutaneous absorption, disposition, and exposure assessment of HMS in rats. Initially, sunscreen preparations of petrolatum jelly, oily solution, lotion, and gel were prepared and evaluated for in vitro permeation of HMS across excised rat skin. Dermal permeability was greatest for gel, and this preparation was used in subsequent in vivo topical application investigations. After iv injection (0.5, 2, or 5 mg/kg), the pharmacokinetics of HMS was linear and was characterized by a large Vd ss (13.2–17 L/kg), high Cls (4.5–6.1 L/h/kg), and long t1/2 (6.1–8.4 h). After topical application of gel, the bioavailability of HMS was 5.4 ± 1.1 and 4.2 ± 0.6% for high and low doses (10 and 20 mg), respectively. Consistent with the prolonged absorption (T max 11.2 ± 1.8 and 12 ± 0 h for low and high doses, respectively), the terminal t 1/2 was longer after topical application (23.6–26.1 h) compared to iv injection. A population pharmacokinetic model was further developed to simultaneously fit the time courses of plasma concentrations and dermal content data after iv injection and topical application. Findings of this study may be useful to further examine the relationship between exposure and endocrine disrupting potential of HMS in risk assessment.

HPLC-MS/MS METHOD FOR THE PHARMACOKINETICS OF HOMOSALATE AFTER TOPICAL ADMINISTRATION IN RATS

Homosalate is a UV filtering agent used in sunscreens and cosmetics for skin protection purposes. Despite the widespread use of these products, the extent of in vivo exposure to homosalate has not been elucidated. This study first reports the development of a rapid and sensitive high performance liquid chromatography-tanden mass spectrometry (HPLC-MS/MS) method for the analysis of homosalate in rat plasma and its pharmacokinetic characterization after topical application. Chromatographic separation was achieved using a Kinetex C18 column (50 mm × 2.1 mm, 2.6 µm). The mobile phase was a mixture of acetonitrile and 0.05% formic acid (82.5:17.5 v/v). The multiple reaction monitoring was based on the transition of m/z 263.2 → 139.0 for homosalate and 251.2 → 139.0 for octyl salicylate (internal standard). The present method was found to be linear in the concentration range of 0.2–400 ng/mL (r > 0.999). The intra- and inter-day assay accuracy and precision ranged from 92.8 to 107.6% and 3.9 to 7.0%, respectively. The developed assay was successfully applied to a pharmacokinetic study in rats after topical application of gel containing homosalate (dose 1.8 mg). The maximum plasma concentration (7.9 ± 2.7 ng/mL) was achieved at 11.3 ± 1.6 hr, indicating a prolonged absorption of homosalate after topical application.

Application of continuous twin screw granulation for the metformin hydrochloride extended release formulation

This study focuses on evaluating the potential of transferring from a batch process to continuous process for manufacturing of the extended release formulation. Metformin hydrochloride (HCl) was used in the model formulation which was intended to contain the high amount of hydrophilic drug. The effects of barrel temperature, binder type, powder feed rate, and screw speed on granule properties (size and strength) and torque value in twin screw granulation were investigated. Due to the high content of hydrophilic model drug, the granules prepared at a higher temperature with HPMC binding solution had the narrower size distribution and greater strength than the granules prepared with distilled water as a binding solution. After continuous drying and milling steps, the granules (continuous process) satisfied the fundamental purpose of granulation with size and flowability, despite different shape compared with the granules (batch process). Furthermore, there were no significant differences between two granulation processes in tablet properties, such as tablet hardness and in vitro release. The considerations and strategies used in this study to transfer from a batch to continuous process can be applied to other existing formulations based on high shear granulation to enable rapid process transfer in the pharmaceutical industry.

A sensitive LC-ESI-MS/MS method for the quantification of avobenzone in rat plasma and skin layers: Application to a topical administration study.

This study describes the development of a sensitive high-performance liquid chromatography-electrospray ionization-tandem mass spectrometry (LC-ESI-MS/MS) method for the quantification of avobenzone in rat plasma and skin layers. Separations were performed on a Zorbax SB C8 column using a binary gradient mobile phase composed of acetonitrile and 0.1% formic acid in water. The assay achieved LLOQ of 0.5ng/ml for plasma, 5ng/ml for stratum corneum, and 10ng/ml for epidermis and dermis. This method was applied to a percutaneous absorption study of avobenzone in rats. At 12h following topical application of emulsion and lotion (applied amount of avobenzone 11.7mg/kg), avobenzone was found primarily in the stratum corneum (16.3-17.8%) followed by epidermis (2.0-3.4%) and dermis (0.11-0.15%). Avobenzone was not quantifiable in the plasma samples collected over a 12h sampling period. Given the excellent plasma assay sensitivity, this study provides evidence that the systemic absorption of avobenzone is insignificant, if any, after topical application.

LC-APCI-MS/MS Quantification and Topical Bioavailability of Chloroacetamide in Rats

Chloroacetamide (CAA) is a preservative used in various cosmetic, personal care and household products. Due to the hazard potential for allergic reaction and reproductive toxicity, CAA is being considered a high priority for screening assessment and toxicological re-evaluation. This study describes the development of a highly specific and sensitive atmospheric pressure chemical ionization tandem mass spectrometry method for the determination of CAA in rat plasma and its application to a topical bioavailability study. Chromatographic separations were achieved on a C8 column using a highly aqueous mobile phase with a binary gradient elution. The assay was linear in the concentration range of 5-2,500 ng/mL (r ≥ 0.995) using a small sample volume (100 µL). Applicability of the assay was demonstrated in a bioavailability study in rats after i.v. injection (0.5 or 2 mg/kg) and topical application (7.02 mg/kg). Average elimination half-life and clearance ranged from 26.6 to 30.5 min and 53.9 to 57.3 mL/min/kg, respectively. Upon topical application, CAA was slowly but steadily absorbed for a prolonged time period (12 h). The topical bioavailability was 53.5 and 48.3% for emulsion and lotion, respectively. The developed assay may be useful to examine the relationship between exposure and toxic potential of CAA in risk assessment.