Subin Lee

Reversible cyclic deformation mechanism of gold nanowires by twinning-detwinning transition evidenced from in situ TEM

Mechanical response of metal nanowires has recently attracted a lot of interest due to their ultra-high strengths and unique deformation behaviours. Atomistic simulations have predicted that face-centered cubic metal nanowires deform in different modes depending on the orientation between wire axis and loading direction. Here we report, by combination of in situ transmission electron microscopy and molecular dynamic simulation, the conditions under which particular deformation mechanisms take place during the uniaxial loading of [110]-oriented Au nanowires. Furthermore, by performing cyclic uniaxial loading, we show reversible plastic deformation by twinning and consecutive detwinning in tension and compression, respectively. Molecular dynamics simulations rationalize the observed behaviours in terms of the orientation-dependent resolved shear stress on the leading and trailing partial dislocations, their potential nucleation sites and energy barriers. This reversible twinning-detwinning process accommodates large strains that can be beneficially utilized in applications requiring high ductility in addition to ultra-high strength.

Nanotwin-governed toughening mechanism in hierarchically structured biological materials

As a natural biocomposite, Strombus gigas, commonly known as the giant pink queen conch shell, exhibits outstanding mechanical properties, especially a high fracture toughness. It is known that the basic building block of conch shell contains a high density of growth twins with average thickness of several nanometres, but their effects on the mechanical properties of the shell remain mysterious. Here we reveal a toughening mechanism governed by nanoscale twins in the conch shell. A combination of in situ fracture experiments inside a transmission electron microscope, large-scale atomistic simulations and finite element modelling show that the twin boundaries can effectively block crack propagation by inducing phase transformation and delocalization of deformation around the crack tip. This mechanism leads to an increase in fracture energy of the basic building block by one order of magnitude, and contributes significantly to that of the overall structure via structural hierarchy.

Role of Graphene in Reducing Fatigue Damage in Cu/Gr Nanolayered Composite

Nanoscale metal/graphene nanolayered composite is known to have ultrahigh strength as the graphene effectively blocks dislocations from penetrating through the metal/graphene interface. The same graphene interface, which has a strong sp2 bonding, can simultaneously serve as an effective interface for deflecting the fatigue cracks that are generated under cyclic bendings. In this study, Cu/Gr composite with repeat layer spacing of 100 nm was tested for bending fatigue at 1.6% and 3.1% strain up to 1,000,000 cycles that showed for the first time a 5-6 times enhancement in fatigue resistance compared to the conventional Cu thin film. Fatigue cracks that are generated within the Cu layer were stopped by the graphene interface, which are evidenced by cross-sectional scanning electron microscopy and transmission electron microscopy images. Molecular dynamics simulations for uniaxial tension of Cu/Gr showed limited accumulation of dislocations at the film/substrate interface, which makes the fatigue crack formation and propagation through thickness of the film difficult in this materials system.

Densification Behavior of Iron Powder during Cold Stepped Compaction

Densification behavior of iron powder under cold stepped compaction was studied. Experimental data were also obtained for iron powder under cold stepped compaction. The elastoplastic constitutive equation based on the yield function of Shima and Oyane was implemented into a finite element program (ABAQUS) to simulate compaction responses of iron powder during cold stepped compaction. Finite element results were compared with experimental data for densification, deformed geometry and density distribution. The agreement between finite element results and experimental data was very good for iron powder. The distributions of hydrostatic pressure and the Mises stress of iron powder under cold stepped compaction were also studied.