Sudhaker Chhabra

Flow and Particle Dispersion in a Pulmonary Alveolus—Part I: Velocity Measurements and Convective Particle Transport

The alveoli are the smallest units of the lung that participate in gas exchange. Although gas transport is governed primarily by diffusion due to the small length scales associated with the acinar region (approximately 500 microm), the transport and deposition of inhaled aerosol particles are influenced by convective airflow patterns. Therefore, understanding alveolar fluid flow and mixing is a necessary first step toward predicting aerosol transport and deposition in the human acinar region. In this study, flow patterns and particle transport have been measured using a simplified in-vitro alveolar model consisting of a single alveolus located on a bronchiole. The model comprises a transparent elastic 5/6 spherical cap (representing the alveolus) mounted over a circular hole on the side of a rigid circular tube (representing the bronchiole). The alveolus is capable of expanding and contracting in phase with the oscillatory flow through the tube. Realistic breathing conditions were achieved by exercising the model at physiologically relevant Reynolds and Womersley numbers. Particle image velocimetry was used to measure the resulting flow patterns in the alveolus. Data were acquired for five cases obtained as combinations of the alveolar-wall motion (nondeforming/oscillating) and the bronchiole flow (none/steady/oscillating). Detailed vector maps at discrete points within a given cycle revealed flow patterns, and transport and mixing of bronchiole fluid into the alveolar cavity. The time-dependent velocity vector fields were integrated over multiple cycles to estimate particle transport into the alveolar cavity and deposition on the alveolar wall. The key outcome of the study is that alveolar-wall motion enhances mixing between the bronchiole and the alveolar fluid. Particle transport and deposition into the alveolar cavity are maximized when the alveolar wall oscillates in tandem with the bronchiole fluid, which is the operating case in the human lung.

Characteristics of Small Vortices in a Turbulent Axisymmetric Jet

Characteristics of small vortices were studied in axisymmetric jets wherein the Kolmogorov scale was approached by progressively decreasing the Reynolds number while still maintaining turbulent flow. A periodic forcing introduced far upstream of tire jet nozzle ensured that the jet was turbulent. A vortex eduction tool was developed and applied to the high-pass filtered 2D velocity field in the axial plane of a turbulent jet while varying Re between 140 and 2600. Vortex population, energy, vorticity, and rms (root-mean-square velocity fluctuations) of the high-pass filtered field were measured to elucidate vortex characteristics

Flow and Particle Dispersion in Lung Acini: Effect of Geometric and Dynamic Parameters During Synchronous Ventilation

The human lung comprises about 300 million alveoli which are located on bronchioles between the 17th to 24th generations of the acinar tree, with a progressively higher population density in the deeper branches (lower acini). The alveolar size and aspect ratio change with generation number. Due to successive bifurcation, the flow velocity magnitude also decreases as the bronchiole diameter decreases from the upper to lower acini. As a result, fluid dynamic parameters such as Reynolds (Re) and Womersley (α) numbers progressively decrease with increasing generation number. In order to characterize alveolar flow patterns and inhaled particle transport during synchronous ventilation, we have conducted measurements for a range of dimensionless parameters physiologically relevant to the upper acini. Acinar airflow patterns were measured using a simplified in vitro alveolar model consisting of a single transparent elastic truncated sphere (representing the alveolus) mounted over a circular hole on the side of a rigid circular tube (representing the bronchiole). The model alveolus was capable of expanding and contracting in-phase with the oscillatory flow through the bronchiole thereby simulating synchronous ventilation. Realistic breathing conditions were achieved by exercising the model over a range of progressively varying geometric and dynamic parameters to simulate the environment within several generations of the acinar tree. Particle image velocimetry was used to measure the resulting flow patterns. Next, we used the measured flow fields to calculate particle trajectories to obtain particle transport and deposition statistics for massless and finite-size particles under the influence of flow advection and gravity. Our study shows that the geometric parameters (β and ΔV/V) primarily affect the velocity magnitudes, whereas the dynamic parameters (Re and α) distort the flow symmetry while also altering the velocity magnitudes. Consequently, the dynamic parameters have a greater influence on the particle trajectories and deposition statistics compared to the geometric parameters. The results from this study can benefit pulmonary research into the risk assessment of toxicological inhaled aerosols, and the pharmaceutical industry by providing better insight into the flow patterns and particle transport of inhalable therapeutics in the acini.

Effect of Geometric and Dynamic Parameters on Fluid Flow and Particle Dispersion in Human Lung Acini

Breathing, defined as the exchange of gases between the respiratory system and the environment, is an essential process for life. The human respiratory system can be divided into three parts: (i) nose, mouth, and nasopharynx, (ii) trachea, and (iii) lungs. The human lung can be further subdivided into conducting airways which are non-alveolated and comprise the upper part of lung, and the acini which consist of flexible, alveolated airways and are responsible for gas exchange [1]. The alveoli collectively provide a large surface area (∼70 m2) for efficient gas exchange [1]; oxygen diffuses into the blood through the alveolar epithelium, whereas carbon dioxide diffuses in the opposite direction from the blood to the lung.Copyright

Fluid Flow and Particle Dispersion in Acini During Asynchronous Ventilation

The human lung comprises 24 generations of dichotomously branching tubes known as bronchi [1]. Functionally, these generations can be categorized as: (1) conducting airways which are non-alveolated and comprise the first 16 generations, and (2) the acini which consist of flexible, alveolated airways and are responsible for gas exchange. The alveoli are the most important units of the human respiratory system and provide large surface area (about 70–80 m2) for efficient gas exchange; oxygen diffuses into the blood through the alveolar epithelium, whereas carbon dioxide diffuses in the opposite direction from the blood to the lung.Copyright

Fluid and Particle Transport in an In-Vitro Model of an Expanding/Contracting Human Alveolus

Inhaled particulate matter from the environment can produce adverse health effects on the human respiratory system. Conversely, inhalable therapeutics can be delivered to the respiratory tract to treat local and systemic ailments. Both of these fields of study require the accurate prediction of particle transport and deposition in the lung, particularly in the acinar region. A necessary first step to predict particle trajectories is to characterize the airflow in which the particles are suspended. Only particles smaller than 5 μm reach the acinar region [1], hence it can be assumed that such particles will closely follow the fluid streamlines. The current work focuses on the fluid mechanics of the acinar region of the lung to infer particle transport and deposition.Copyright