Sumedh P. Surwade

All‐Organic Vapor Sensor Using Inkjet‐Printed Reduced Graphene Oxide

Described herein is a flexible and lightweight chemiresistormade of a thin film composed of overlapped and reducedgraphene oxide platelets (RGO film), which were printedonto flexible plastic surfaces by using inkjet techniques. TheRGO films can reversibly and selectively detect chemicallyaggressivevapors suchasNO

Water desalination using nanoporous single-layer graphene

By creating nanoscale pores in a layer of graphene, it could be used as an effective separation membrane due to its chemical and mechanical stability, its flexibility and, most importantly, its one-atom thickness. Theoretical studies have indicated that the performance of such membranes should be superior to state-of-the-art polymer-based filtration membranes, and experimental studies have recently begun to explore their potential. Here, we show that single-layer porous graphene can be used as a desalination membrane. Nanometre-sized pores are created in a graphene monolayer using an oxygen plasma etching process, which allows the size of the pores to be tuned. The resulting membranes exhibit a salt rejection rate of nearly 100% and rapid water transport. In particular, water fluxes of up to 10(6) g m(-2) s(-1) at 40 °C were measured using pressure difference as a driving force, while water fluxes measured using osmotic pressure as a driving force did not exceed 70 g m(-2) s(-1) atm(-1).

Effect of airborne contaminants on the wettability of supported graphene and graphite

It is generally accepted that supported graphene is hydrophobic and that its water contact angle is similar to that of graphite. Here, we show that the water contact angles of freshly prepared supported graphene and graphite surfaces increase when they are exposed to ambient air. By using infrared spectroscopy and X-ray photoelectron spectroscopy we demonstrate that airborne hydrocarbons adsorb on graphitic surfaces, and that a concurrent decrease in the water contact angle occurs when these contaminants are partially removed by both thermal annealing and controlled ultraviolet-O3 treatment. Our findings indicate that graphitic surfaces are more hydrophilic than previously believed, and suggest that previously reported data on the wettability of graphitic surfaces may have been affected by unintentional hydrocarbon contamination from ambient air.

Oxidative Template for Conducting Polymer Nanoclips

Bulk quantities of electronic conducting polymers such as polyaniline, polypyrrole, and poly(3,4-ethylenedioxythiophene), having an unusual 2D nanoclip-like morphology is described using a general oxidative template assembly route which is orchestrated by an insoluble complex formed between an anionic oxidant (S(2)O(8)(2-)) and a cationic surfactant.

Catalyst-Free Synthesis of Oligoanilines and Polyaniline Nanofibers Using H2O2

Nanofibers of polyaniline and oligoanilines of controlled molecular weight, e.g., tetraaniline, octaaniline, and hexadecaaniline, are synthesized using a versatile high ionic strength aqueous system that permits the use of H(2)O(2) with no added catalysts as a mild oxidizing agent. Films of oligoanilines deposited on plastic substrates show a robust and reversible chemiresistor response to NO(2) vapor at room temperature in ambient air (100-5 ppm).

Flexible, All-Organic Chemiresistor for Detecting Chemically Aggressive Vapors

Chemiresistors made of thin films of single-walled carbon nanotube (CNT) bundles on cellulosics (paper and cloth) can detect aggressive oxidizing vapors such as nitrogen dioxide and chlorine at 250 and 500 ppb, respectively, at room temperature in ambient air without the aid of a vapor concentrator. Inkjet-printed films of CNTs on 100% acid-free paper are significantly more robust than dip-coated films on plastic substrates. Performance attributes include low sensor-to-sensor variation, spontaneous signal recovery, negligible baseline drift, and the ability to bend the sensors to a crease without loss of sensor performance.

Molecular Lithography through DNA-Mediated Etching and Masking of SiO2

We demonstrate a new approach to pattern transfer for bottom-up nanofabrication. We show that DNA promotes/inhibits the etching of SiO(2) at the single-molecule level, resulting in negative/positive tone pattern transfers from DNA to the SiO(2) substrate.

Nanoscale Growth and Patterning of Inorganic Oxides Using DNA Nanostructure Templates

We describe a method to form custom-shaped inorganic oxide nanostructures by using DNA nanostructure templates. We show that a DNA nanostructure can modulate the rate of chemical vapor deposition of SiO2 and TiO2 with nanometer-scale spatial resolution. The resulting oxide nanostructure inherits its shape from the DNA template. This method generates both positive-tone and negative-tone patterns on a wide range of substrates and is compatible with conventional silicon nanofabrication processes. Our result opens the door to the use of DNA nanostructures as general-purpose templates for high-resolution nanofabrication.

Photochemical oxidation of CVD-grown single layer graphene

CVD-grown single layer graphene undergoes rapid photochemical oxidation in the presence of ultraviolet light and oxygen. The oxidation results in a homogeneous decay of the graphitic material; no nanoscale line cracks or pits were observed with an atomic force microscope. The conductivity of the graphene film decreases with an increasing degree of oxidation. It is crucial to understand and enhance the photochemical stability of graphene for its long term use as a transparent conducting material.

Ultrafast Electron Transfer Kinetics of Graphene Grown by Chemical Vapor Deposition

High electrochemical reactivity is required for various energy and sensing applications of graphene grown by chemical vapor deposition (CVD). Herein, we report that heterogeneous electron transfer can be remarkably fast at CVD-grown graphene electrodes that are fabricated without using the conventional poly(methyl methacrylate) (PMMA) for graphene transfer from a growth substrate. We use nanogap voltammetry based on scanning electrochemical microscopy to obtain very high standard rate constants k(0) ≥25 cm s(-1) for ferrocenemethanol oxidation at polystyrene-supported graphene. The rate constants are at least 2-3 orders of magnitude higher than those at PMMA-transferred graphene, which demonstrates an anomalously weak dependence of electron-transfer rates on the potential. Slow kinetics at PMMA-transferred graphene is attributed to the presence of residual PMMA. This unprecedentedly high reactivity of PMMA-free CVD-grown graphene electrodes is fundamentally and practically important.