Sun Hong Kwon

Study on Wave Run-Up Phenomenon over Vertical Cylinder

In this paper, the wave run.up on a vertical cylinder is presented. Various cross sections of a cylinder were simulated using the panel method for various wave periods. Two.dimensional model tests were performed in a wave flume. The simulation results are compared with the test results. The simulation is based on the linear diffraction theory.

An Experimental Study on Hydro-Elasticity in Sloshing

This research presents an experimental investigation on hydro-elasticity in sloshing experiment. Two models were tested. One of the models is ordinary, which is considered to be rigid wall made of plexi-glass. The other model has a flexible wall made of stainless steel. The two models were operated with identical excitation so that the influence of the elasticity can be detected. Four different filling levels were tested. The magnitude of excitation was 10% of the model longitudinal length. The models were operated only in surge motion. The models were tested with several excitation frequencies. The pressures were measured at 12 locations. It was shown that the effect of hydro-elasticity increases the magnitude of impact pressures.Copyright

Experimental and Numerical Study on Slamming Impact

This paper presents the results of experimental and numerical research on the slamming phenomenon. Two experimental techniques were proposed in this study. The traditional free drop tests were carried out. However, the free drop tests done in this study using an LM guide showed excellent repeatability, unlike those of other researchers. The coefficients of variation for the drop test done in this experiment were less than 0.1. The other experimental technique proposed in this study was a novel concept that used a pneumatic cylinder. The pneumatic cylinder could accelerate the specimen over a very short distance from the free surface. As a result, high rates of repeatability were achieved. In the numerical study, the development of in-house code and utilization of commercial code were carried out. The in-house code developed was based on the boundary element method. It is a potential code. This was mostly applied to the computation of the wedge entry problem. The commercial code utilized was FLUENT. Most of the previous slamming research was done under the assumption of a constant body velocity all through the impact process, which is not realistic at all. However, the interaction of a fluid and body were taken into account by employing a user-defined function in this study. The experimental and numerical results were compared. The in-house code based on BEM showed better agreement than that of the FLUENT computation when it cames to the wedge computation. However, the FLUENT proved that it could deal with a very complex geometry while BEM could not. The proposed experimental and numerical procedures were shown to be very promising tools for dealing with slamming problems.

Validity of Ocean Wave Spectrum Using Rayleigh Probability Density Function

The distribution of wave heights is assumed to be a Rayleigh distribution, based on the assumption of a narrow band and Gaussian distribution of wave elevation. The present study was started with doubts about the narrow band assumption. We selected the wave spectra widely used to simulate irregular random waves. The wave spectra used in this study included the Pierson-Moskowitz spectrum, Bretschneider-Mitsuyasu spectrum, and JONSWAP spectrum. The directionality of the waves was considered. The cosine 2-l type directional spreading function and mixed form of the half-cosine 2-s type with Mitsuyasu type directional spreading are considered here to investigate the effects of a directional spreading function on random waves. The simulated wave height distribution is compared with a Rayleigh distribution.

Prediction for Irregular Ocean Wave and Floating Body Motion by Regularization: Part 2. Motion Prediction

In the analysis of the motion of a floating body, the domains can broadly be divided into the frequency domain and the time domain. The essence of the frequency domain analysis lies in calculating the hydrodynamic coefficient from the equation of motion, which has six degrees of freedom, by applying several methods. In this research, Bureau Veritas’s “HydroStar” software was used, and the comparison and the verification were carried out by experiments. For the time domain analysis, we used an existing method proposed by Cummins and made motion predictions by using deterministic random phases calculated in the time domain calculations of the excitation force. Lastly, the potential of wave and motion predictions was verified through the data obtained from a motion analysis experiment using a tension leg platform in the context of irregular waves.

Prediction for Irregular Ocean Wave and Floating Body Motion by Regularization: Part 1. Irregular Wave Prediction

Ocean waves can be explained in terms of many factors, including wave spectrum, which has the characteristics of wave height and periodicity, directional spreading function, which has a directional property, and random phase, which randomly represents a certain property. Under the assumption of a linear system, ocean waves show irregular behaviours, which can be observed in the forms of wave spectrum, directional spreading function, and complex phase calculations using the method of linear superposition. Ocean waves, which include a variety of periodic elements, exhibit direct proportionality between their period and propagation velocity. The purpose of this study was to understand the phase components of the period and to make exact calculations on the deterministic phase in order to make predictions on ocean waves. However, measurements of actual ocean waves exist only in the form of information on wave elevation, so we faced an inverse problem of having to analyse this information and calculate the deterministic phase. Regularization was used as part of the solution, and various methods were used to obtain stable values.

Study on Moonpool Resonance Effect on Motion of Modern Compact Drillship

A drillship is a representative floating offshore installation. The boom in oil and gas field development has dramatically increased the demands for drillships. Drillships have a moonpool in the center area of the ship for the purpose of drilling. This moonpool has an effect on the seakeeping performance of a drillship in the vicinity of the resonance frequency. Because of the moonpool, drillships act in different resonance modes, called the sloshing mode and piston mode. The objective of this study was to find the moonpool effect on the motion of a drillship through the motion analysis of a currently operating modern compact drillship. The predicted resonance frequencies based on Molin’s theoretical formula, Fukuda’s empirical formula, and BEM?based numerical analysis are compared. The accuracy of the predictions using the theoretical and empirical formulas is compared with the numerical analysis and evaluated. In the case of the piston mode, the difference between the resonance frequency from theoretical formula and the resonance frequency from the numerical analysis is analyzed. The resonance frequency formula for more a complex moonpool geometry such as a moonpool with a cofferdam is necessarily emphasized.