Sun Ok Chung

Analysis of the PTO Torque of a Transplanter by Planting Condition

Dept. of Biosystems Machinery Engineering, Chungnam National University, Daejeon, 34134, Korea Dept. of Bio-Mechatronic Engineering, Sungkyunkwan University, Suwon, 16419, Korea Research Institute, Kukje Machinery Co., Ltd., Okcheon, 29036, Korea Korea Institute of Industrial Technology, Gimje, 576-881, Korea Smart Farming Education Team, Rural Human Resource Development Center, Jeonju, 54874, Korea Dept. of Agricultural Economics, Chungnam National University, Daejeon, 34134, Korea Received: September 12nd, 2016; Revised: September 21st, 2016; Accepted: October 4th, 2016 Purpose: This study measured and analyzed the PTO (power take off) torque of a transplanter according to the planting conditions during field operation. Methods: A torque measurement system was constructed with torque sensors to measure the torque of a PTO shaft, a measurement device to acquire sensor signals, and a power controller to provide power for a laptop computer. The field operation was conducted at four planting distances (26, 35, 43, and 80 cm) and two planting depths using the transplanter on a field with similar soil conditions. One-way ANOVA with planting distance and Duncan’s multiple range test at a significance level of 0.05 were used to analyze the PTO torque. The torque ratio was calculated based on the minimum torque using the average PTO torque measured under each planting condition. Results: The average torques on the PTO shaft for planting distances of 26, 35, 43, and 80 cm at a low planting depth were 11.05, 9.07, 7.04, and 3.75 Nm, respectively; the same for planting distances of 26, 35, 43, and 80 cm at a middle planting depth were 12.20, 9.86, 7.94, and 4.32 Nm, respectively. When the planting distance decreased by 43, 35, and 26 cm, the torque ratio at a low planting depth increased by 88, 142, and 195%, respectively. When the planting distance decreased by 43, 35, and 26 cm, the torque ratio at the middle planting depth increased by 84, 128, and 182%, respectively. Conclusions: PTO torque fluctuated by planting distance and depth. Moreover, the PTO torque increased for short planting distances. Therefore, farmers should determine the planting conditions of the transplanter by considering the load and durability of the machine. The results of this study provide useful information pertaining to the optimum PTO design of the transplanter considering the field load.

Analysis of Technical Trend of Electric Agricultural Field Machinery

As basic research to develop HEV and EV agricultural field machinery, the present study analyzes the technical trend of electric agricultural field machinery through product analysis, paper analysis, and patent analysis concerning HEV and EV in the automobile, construction machinery, and agricultural machinery sectors. For product analysis, the homepages of companies in these sectors were consulted to analyze the number of products of each company. For paper analysis, key words related to HEV and EV were selected, a search formula was drawn up, and articles search sites were consulted. And for patent analysis too, key words were selected and then a search formula was drawn up to examine published patent applications or registered patent applications, and trends were analyzed by structure, country, and year. The number of HEV and EV products were 17 in the automobile area, 8 in construction machinery, and 4 in agricultural machinery. Notably, in the agricultural machinery area, all HEV and EV products were from advanced companies overseas. In terms of papers, papers published in the past 5 years were searched and 33,195 papers were from the Y. J. Kim · W. S. Kim · S. O. Chung Dept. of Biosystems Machinery Engineering Chungnam National University Y. J. Kim e-mail : babina@cnu.ac.kr W. S. Kim e-mail : ws6602@hanmail.net ( ) S. O. Chung e-mail : sochung@cnu.ac.kr D. H. Lee Dept. of Bio-mechatronic Engineering Sungkyunkwan University e-mail : leedh18m@naver.com automobile area, 3,806 were from construction machinery, and 2,687, the fewest papers, were from the agricultural machinery area. A search of patents in the electric drive technology area in Korea, USA, and Japan, and Europe showed 1,927 valid patents, with 1,120 in Japan, 497 in USA, 193 in Korea, and 117 in Europe. Analysis of the trend of research on electric agricultural field machinery by product, paper, and patent shows the development of HEV and EV technology in Korea is insufficient compared to USA, Japan, and Europe, which means rapid technological development is needed.