Sunil A. Agnihotri

Development of Novel Interpenetrating Network Gellan Gum-Poly(vinyl alcohol) Hydrogel Microspheres for the Controlled Release of Carvedilol

Novel interpenetrating polymeric network microspheres of gellan gum and poly(vinyl alcohol) were prepared by the emulsion cross-linking method. Carvedilol, an antihypertensive drug, was successfully loaded into these microspheres prepared by changing the experimental variables such as ratio of gellan gum:poly(vinyl alcohol) and extent of cross-linking in order to optimize the process variables on drug encapsulation efficiency, release rates, size, and morphology of the microspheres. Formation of interpenetrating network and the chemical stability of carvedilol after preparing the microspheres was confirmed by Fourier transform infrared spectroscopy. Differential scanning calorimetry and x-ray diffraction studies were made on the drug-loaded microspheres to investigate the crystalline nature of the drug after encapsulation. Results indicated a crystalline dispersion of carvedilol in the polymer matrix. Scanning electron microscopy confirmed the spherical nature and smooth surface morphology of the microspheres produced. Mean particle size of the microspheres as measured by laser light scattering technique ranged between 230 and 346 µm. Carvedilol was successfully encapsulated up to 87% in the polymeric matrices. In vitro release studies were performed in the simulated gastric fluid or simulated intestinal fluid. The release of carvedilol was continued up to 12 h. Dynamic swelling studies were performed in the simulated gastric fluid or simulated intestinal fluid, and diffusion coefficients were calculated by considering the spherical geometry of the matrices. The release data were fitted to an empirical relation to estimate the transport parameters. The mechanical properties of interpenetrating polymeric networks prepared were investigated. Network parameters such as molar mass between cross-links and cross-linking density for interpenetrating polymeric networks were calculated. †This paper is CEPS Communication # 59. Part of this paper is accepted for presentation at the 30th Annual meeting and Exposition, Society for Biomaterials, to be held in April 2005 at Memphis, Tennessee, USA.

Development of polysaccharide-based colon targeted drug delivery systems for the treatment of amoebiasis

ABSTRACT The main focus of this study is to develop colon targeted drug delivery systems for metronidazole (MTZ). Tablets were prepared using various polysaccharides or indigenously developed graft copolymer of methacrylic acid with guar gum (GG) as a carrier. Various polysaccharides such as GG, xanthan gum, pectin, carrageenan, β-cyclodextrin (CD) or methacrylic acid-g-guar (MAA-g-GG) gum have been selected and evaluated. The prepared tablets were tested in vitro for their suitability as colon-specific drug delivery systems. To further improve the colon specificity, some selected tablet formulations were enteric coated with Eudragit-L 100 to give protection in an acidic environment. Drug release studies were performed in simulated gastric fluid (SGF) for 2 hr followed by simulated intestinal fluid (SIF) at pH 7.4. The dissolution data demonstrate that the rate of drug release is dependent upon the nature and concentration of polysaccharide/polymer used in the formulations. Uncoated tablets containing xanthan gum or mixture of xanthan gum with graft copolymer showed 30–40% drug release during the initial 4–5 hr, whereas for tablets containing GG with the graft copolymer, it was 70%. After enteric coating, the release was drastically reduced to 18–24%. The other polysaccharides were unable to protect drug release under similar conditions. Preparations with xanthan gum as a matrix showed the time-dependent release behavior. Further, in vitro release was performed in the dissolution media with rat caecal contents. Results indicated an enhanced release when compared to formulations studied in dissolution media without rat caecal contents, because of microbial degradation or polymer solubilization. The nature of drug transport was found to be non-Fickian in case of uncoated formulations, whereas for the coated formulations, it was found to be super-Case-II. Statistical analyses of release data indicated that MTZ release is significantly affected by the nature of the polysaccharide used and enteric coating of the tablet. Differential scanning calorimetry indicated the presence of crystalline nature of drug in the formulations.

Chitosan Nanoparticles for Prolonged Delivery of Timolol Maleate

Timolol maleate-loaded chitosan (CS) nanoparticles were prepared by desolvation method. Experimental variables such as molecular weight of CS and amount of crosslinking agent were varied to study their effect on drug entrapment efficiency, size and release rates of nanoparticles. Chemical stability of timolol maleate (TM) and crosslinking of CS were confirmed by Fourier transform infrared spectroscopy. Differential scanning calorimetric studies were performed on drug-loaded nanoparticles to investigate crystalline nature of the drug after entrapment. Results indicated amorphous dispersion of drug in the polymer matrix. Scanning electron microscopy revealed irregularly shaped particles. Mean particle size of nanoparticles ranged between 118 and 203 nm, while zeta potential ranged between +17 and +22 mV. Entrapment efficiency of nanoparticles ranged between 47.6 and 63.0%. In-vitro release studies were performed in phosphate buffer saline of pH 7.4. A slow release of TM up to 24 h was observed. A 32 full factorial design was employed and second-order regression models were used to study the response (% drug release at 4 h). Release data as analyzed by an empirical relationship suggested that drug release deviated from the Fickian trend.

Evaluation and Controlled Release Characteristics of Modified Xanthan Films for Transdermal Delivery of Atenolol

ABSTRACT The present study was performed to evaluate the possibility of using modified xanthan films as a matrix system for transdermal delivery of atenolol (ATL), which is an antihypertensive drug. Acrylamide was grafted onto xanthan gum (XG) by free radical polymerization using ceric ion as an initiator. Fourier transform infrared spectroscopy and differential scanning calorimetry indicated the formation of the graft copolymer. The obtained graft copolymer was loaded with ATL and films were fabricated by solution casting method for transdermal application. Various formulations were prepared by varying the grafting ratio, drug loading, and different penetration enhancers. The formulations prepared were characterized for weight, thickness uniformity, water vapor transmission rate, and uniformity in drug content of the matrix. All the thin films were slightly opaque, smooth, flexible, and permeable to water vapor, indicating their permeability characteristics suitable for transdermal studies. Fourier transform infrared spectroscopy and differential scanning calorimetry studies indicated no significant interactions between drug and polymer. Drug is distributed uniformly in the matrix but showed a slight amorphous nature. Drug-loaded films were analyzed by X-ray diffraction to understand the drug polymorphism inside the films. Scanning electron microscopic studies of the placebo and drug-loaded films demonstrated a remarkable change in their surface morphology. The skin irritation tests were performed in mice and these results suggested that both placebo and drug-loaded films produced negligible erythema and edema compared to formalin (0.8% v/v) as the standard irritant. The in vitro drug release studies were performed in phosphate buffer saline using a Keshary-Chien diffusion cell. Different formulations were prepared and variations in drug release profiles were observed. Release data were analyzed by using the Ritger and Peppas equation to understand the mechanism of drug release as well as the estimation of n values, which ranged between 0.41 and 0.53, suggesting a Fickian diffusion trend.

Recent advances and novel strategies in pre-clinical formulation development: An overview

Preclinical profiling for a New Chemical Entity (NCE), if carried out carefully, can be a good predictor of human clinical outcome. Along with the pre-clinical study design a thorough understanding of the physico-chemical properties of the drug candidate and a careful selection of the formulation development strategy are of high importance. The study scientist can experience various challenges in executing a pre-clinical study. This review article provides an overview of the significance of pre-formulation study parameters and their relevance to preclinical studies. Various physico-chemical properties such as solubility, partition co-efficient, and permeability are attributes critical to the performance of the drug substance. This article presents unique formulation development strategies for the successful completion of pre-clinical studies. Formulation development approach for a pre-clinical study involves taking into consideration various important factors such as duration of the study, Biopharmaceutics Classification System (BCS) of the drug, intended duration of action and the desired route of administration. These parameters play key role in the selection of solubilizers, surfactants, co-solvents and optimum pH for the formulation. Two most common routes of administration in the early screening of pharmaceuticals viz., oral and intravenous are emphasized. The article also describes recent advances in preclinical formulation development including selected examples of in vivo preclinical models for anti-cancer, anti-viral, anti-diabetic and anti-hypertensive drugs. Adherence to the regulatory requirement is also the key to successful completion of the preclinical development. An overview of preclinical formulation development along with basic concepts and the recent studies conducted in the past decade are presented in this review.