Suzanne Burling

Rhodium(I) and iridium(I) complexes with bidentate N,N and P,N ligands as catalysts for the hydrothiolation of alkynes

Cationic iridium(I), rhodium(I) complexes containing bis(1-methylimidazol-2-yl)methane, bim, [M(bim)(CO)2]BPh4 (M = Ir (1), Rh (2)); bis(pyrazol-1-yl)methane, bpm, [M(bpm)(CO)2]BPh4 (M = Ir (3), Rh (4)) have been shown to be effective in catalysing the regioselective addition of thiophenol to a series of alkynes. Analogous cationic and neutral Ir(I), Rh(I) complexes with the novel mixed P,N-donor bidentate ligand 1-(2-diphenylphosphino)ethylpyrazole, PyP (5), [M(PyP)(COD)]BPh4 (M = Ir (6), Rh (7), COD = 1,5-cyclooctadiene); [Rh(PyP)(COD)]BF4 (8); [Ir(PyP)(CO)2]BPh4 (9); [Rh(PyP)(CO)2]BF4 (10); [M(PyP)(CO)Cl] (M = Ir (11), Rh (12)) have also been synthesised, and characterised by NMR. The solid-state structures of (6), (7), (11) and (12) have been determined by single-crystal X-ray diffraction analysis. The metal complexes (9)–(12) with the mixed P,N-donor ligand, PyP are in most cases more effective in promoting the hydrothiolation of alkynes in comparison with the analogous complexes (1)–(4) with N,N-donor ligands. The iridium complexes were significantly more effective than their rhodium analogues in promoting the hydrothioloation of alkynes. The cationic complexes (9) and (10) are more effective as catalysts for the hydrothiolation of alkynes than their neutral analogues (11) and (12).

The influence of N-heterocyclic carbenes (NHC) on the reactivity of [Ru(NHC)4H]+ with H2, N2, CO and O2

The five-coordinate ruthenium N-heterocyclic carbene (NHC) hydrido complexes [Ru(IiPr(2)Me(2))(4)H][BAr(F) (4)] (1; IiPr(2)Me(2)=1,3-diisopropyl-4,5-dimethylimidazol-2-ylidene; Ar(F)=3,5-(CF(3))(2)C(6)H(3)), [Ru(IEt(2)Me(2))(4)H][BAr(F) (4)] (2; IEt(2)Me(2)=1,3-diethyl-4,5-dimethylimidazol-2-ylidene) and [Ru(IMe(4))(4)H][BAr(F) (4)] (3; IMe(4)=1,3,4,5-tetramethylimidazol-2-ylidene) have been synthesised following reaction of [Ru(PPh(3))(3)HCl] with 4-8 equivalents of the free carbenes at ambient temperature. Complexes 1-3 have been structurally characterised and show square pyramidal geometries with apical hydride ligands. In both dichloromethane or pyridine solution, 1 and 2 display very low frequency hydride signals at about delta -41. The tetramethyl carbene complex 3 exhibits a similar chemical shift in toluene, but shows a higher frequency signal in acetonitrile arising from the solvent adduct [Ru(IMe(4))(4)(MeCN)H][BAr(F) (4)], 4. The reactivity of 1-3 towards H(2) and N(2) depends on the size of the N-substituent of the NHC ligand. Thus, 1 is unreactive towards both gases, 2 reacts with both H(2) and N(2) only at low temperature and incompletely, while 3 affords [Ru(IMe(4))(4)(eta(2)-H(2))H][BAr(F) (4)] (7) and [Ru(IMe(4))(4)(N(2))H][BAr(F) (4)] (8) in quantitative yield at room temperature. CO shows no selectivity, reacting with 1-3 to give [Ru(NHC)(4)(CO)H][BAr(F) (4)] (9-11). Addition of O(2) to solutions of 2 and 3 leads to rapid oxidation, from which the Ru(III) species [Ru(NHC)(4)(OH)(2)][BAr(F) (4)] and the Ru(IV) oxo chlorido complex [Ru(IEt(2)Me(2))(4)(O)Cl][BAr(F) (4)] were isolated. DFT calculations reproduce the greater ability of 3 to bind small molecules and show relative binding strengths that follow the trend CO >> O(2) > N(2) > H(2).

C-F Bond activation at Ni(0) and simple reactions of square planar Ni(II) fluoride complexes.

The reaction of Ni(COD)(2)(COD = 1,5-cyclooctadiene) with triethylphosphine and pentafluoropyridine in hexane has been shown previously to yield trans-[NiF(2-C(5)NF(4))(PEt(3))(2)](1a) with a preference for reaction at the 2-position of the heteroaromatic. The corresponding reaction with 2,3,5,6-tetrafluoropyridine was shown to yield trans-[NiF(2-C(5)NF(3)H)(PEt(3))(2)](1b). In this paper, we show that reaction of Ni(COD)(2) with triethylphosphine and pentafluoropyridine in THF yields a mixture of 1a and 1b. Competition reactions of Ni(COD)(2) with triethylphosphine in the presence of mixtures of heteroaromatics in hexane reveal a kinetic preference of k(pentafluoropyridine):k(2,3,5,6-tetrafluoropyridine)= 5.4:1. Treatment of 1a and 1b with Me(3)SiN(3) affords trans-[Ni(N(3))(2-C(5)NF(4))(PEt(3))(2)](2a) and trans-[Ni(N(3))(2-C(5)NHF(3))(PEt(3))(2)](2b), respectively. The complex trans-[Ni(NCO)(2-C(5)NHF(3))(PEt(3))(2)](3b) is obtained on reaction of with Me(3)SiNCO and by photolysis of under CO, while trans-[Ni(eta(1)-C [triple bond CPh)(2-C(5)NF(4))(PEt(3))(2)](4a) is obtained by reaction of phenylacetylene with 1a. Addition of KCN, KI and NaOAc to complex 1a affords trans-[Ni(X)(2-C(5)NF(4))(PEt(3))(2)](5a X = CN, 6a X = I, 7a X = OAc), respectively. The PEt(3) groups of complex are readily replaced by addition of 1,2-bis(dicyclohexylphosphino)ethane (dcpe) to produce [NiF(2-C(5)F(4)N)(dcpe)](8a). Addition of dcpe to trans-[Ni(OTf)(2-C(5)F(4)N)(PEt(3))(2)](10a), however, yields the salt [Ni(2-C(5)F(4)N)(dcpe)(PEt(3))](OTf)(9a) by substitution of only one PEt(3) and displacement of the triflate ligand. The structures of 2b, 4a, 7a and 8a were determined by X-ray crystallography. The influence of different ancillary ligands on the bond lengths and angles of square-planar nickel structures with polyfluoropyridyl ligands is analysed.

Cyclization of Acetylenic Amides Using a Cationic Rhodium(I) Complex

The cationic Rh(I) dicarbonyl complex [{Rh(bim)(CO)2}+BPh4–] 1, containing a bidentate bisimidazolylmethane ligand [bim refers to bis(N-methylimidazol-2-yl)methane] acts as a catalyst for the cyclization of alkynyl amides to produce lactams and N-acyl heterocyclic compounds.

Bromobis(triphenylphosphine)(N-succinimide)palladium(II) as a novel catalyst for Stille cross-coupling reactions

A new palladium catalyst is reported for Stille cross-coupling, namely [Pd(NCOC2H4CO)(PPh3)2Br].