Suzanne J. Litscher

Low Bone Strength Is a Manifestation of Phenylketonuria in Mice and Is Attenuated by a Glycomacropeptide Diet

Purpose Phenylketonuria (PKU), caused by phenylalanine (phe) hydroxylase loss of function mutations, requires a low-phe diet plus amino acid (AA) formula to prevent cognitive impairment. Glycomacropeptide (GMP), a low-phe whey protein, provides a palatable alternative to AA formula. Skeletal fragility is a poorly understood chronic complication of PKU. We sought to characterize the impact of the PKU genotype and dietary protein source on bone biomechanics. Procedures Wild type (WT; Pah+/+) and PKU (Pahenu2/enu2) mice on a C57BL/6J background were fed high-phe casein, low-phe AA, and low-phe GMP diets between 3 to 23 weeks of age. Following euthanasia, femur biomechanics were assessed by 3-point bending and femoral diaphyseal structure was determined. Femoral ex vivo bone mineral density (BMD) was assessed by dual-enengy x-ray absorptiometry. Whole bone parameters were used in prinicipal component analysis. Data were analyzed by 3-way ANCOVA with genotype, sex, and diet as the main factors. Findings Regardless of diet and sex, PKU femora were more brittle, as manifested by lower post-yield displacement, weaker, as manifested by lower energy and yield and maximal loads, and showed reduced BMD compared with WT femora. Four principal components accounted for 87% of the variance and all differed significantly by genotype. Regardless of genotype and sex, the AA diet reduced femoral cross-sectional area and consequent maximal load compared with the GMP diet. Conclusions Skeletal fragility, as reflected in brittle and weak femora, is an inherent feature of PKU. This PKU bone phenotype is attenuated by a GMP diet compared with an AA diet.

Accuracy and Precision of PIXImus Densitometry for Ex Vivo Mouse Long Bones: Comparison of Technique and Software Version

Many densitometric studies in mice assess bone mineral density (BMD) at specified regions of interest, often using ex vivo specimens. In the present study, we sought to determine the precision and accuracy of ex vivo densitometry of mouse bones, comparing two software versions and two data acquisition techniques. The newer software allows manual adjustment of the threshold value for bone, improving the ability to analyze bone edges correctly. Root mean square standard deviations were 2-3 mg/cm2, with coefficients of variation ranging between 3% and 5% for femora and humeri and between 6% and 7% for radii. The regression coefficients for bone mineral content as a function of ash mass were near 1 for femora and humeri, but considerably lower for radii. Coefficients of determination were inversely related to bone size, with R2 values exceeding 0.9 at the femur, 0.8 at the humerus, and ranging between 0.3 and 0.6 at the radius. We found that our instrument has a position artifact, with BMD and bone mineral content dependent on the specimens coordinates in the scanned field. Our findings establish the limitations of ex vivo densitometry with the PIXImus and support our recommendation that investigators seek position artifacts in their instruments.

LINKAGE MAPPING OF FEMORAL MATERIAL PROPERTIES IN A RECIPROCAL INTERCROSS OF HCB-8 AND HCB-23 RECOMBINANT MOUSE STRAINS

Skeletal fragility is an important health problem with a large genetic component. We performed a 603 animal F2 reciprocal intercross of the recombinant congenic strains HcB-8 and HcB-23 to genetically map quantitative trait loci (QTLs) for tissue-level femoral biomechanical performance. These included elastic and post-yield strain, Youngs modulus, elastic and maximum stress, and toughness and were calculated from 3-point bend testing of femora by the application of standard beam equations. We mapped these with R/qtl and QTL Cartographer and established significance levels empirically by permutation testing. Significant QTLs for at least one trait are present on chromosomes 1, 6, and 10 in the full F2 population, with additional QTLs evident in subpopulations defined by sex and cross direction. On chromosome 10, we find a QTL for post-yield strain and toughness, phenotypes that have not been mapped previously. Notably, the HcB-8 allele at this QTL increases post-yield strain and toughness, but decreases bone mineral density (BMD), while the material property QTLs on chromosomes 1, 6, and at a second chromosome 10 QTL are independent of BMD. We find significant sex x QTL and cross direction x QTL interactions. A robust, pleiotropic chromosome 4 QTL that we previously reported at the whole-bone level showed no evidence of linkage at the tissue-level, supporting our interpretation that modeling capacity is its primary phenotype. Our data demonstrate an inverse relationship between femoral perimeter and Youngs modulus, with R(2)=0.27, supporting the view that geometric and material bone properties are subject to an integrated set of regulatory mechanisms. Mapping QTLs for tissue-level biomechanical performance advances understanding of the genetic basis of bone quality.

CSF1 Overexpression Promotes High-Grade Glioma Formation without Impacting the Polarization Status of Glioma-Associated Microglia and Macrophages

Current therapies for high-grade gliomas extend survival only modestly. The glioma microenvironment, including glioma-associated microglia/macrophages (GAM), is a potential therapeutic target. The microglia/macrophage cytokine CSF1 and its receptor CSF1R are overexpressed in human high-grade gliomas. To determine whether the other known CSF1R ligand IL34 is expressed in gliomas, we examined expression array data of human high-grade gliomas and performed RT-PCR on glioblastoma sphere-forming cell lines (GSC). Expression microarray analyses indicated that CSF1, but not IL34, is frequently overexpressed in human tumors. We found that while GSCs did express CSF1, most GSC lines did not express detectable levels of IL34 mRNA. We therefore studied the impact of modulating CSF1 levels on gliomagenesis in the context of the GFAP-V12Ha-ras-IRESLacZ (Ras*) model. Csf1 deficiency deterred glioma formation in the Ras* model, whereas CSF1 transgenic overexpression decreased the survival of Ras* mice and promoted the formation of high-grade gliomas. Conversely, CSF1 overexpression increased GAM density, but did not impact GAM polarization state. Regardless of CSF1 expression status, most GAMs were negative for the M2 polarization markers ARG1 and CD206; when present, ARG1(+) and CD206(+) cells were found in regions of peripheral immune cell invasion. Therefore, our findings indicate that CSF1 signaling is oncogenic during gliomagenesis through a mechanism distinct from modulating GAM polarization status. Cancer Res; 76(9); 2552-60. ©2016 AACR.

Comprehensive Skeletal Phenotyping and Linkage Mapping in an Intercross of Recombinant Congenic Mouse Strains HcB-8 and HcB-23

Bone biomechanical performance is a complex trait or, more properly, an ensemble of complex traits. Biomechanical performance incorporates flexibility under loading, yield and failure load, and energy to failure; all are important measures of bone function. To date, the vast majority of work has focused on yield and failure load and its surrogate, bone mineral density. We performed a reciprocal intercross of the mouse strains HcB-8 and HcB-23 to map and ultimately identify genes that contribute to differences in biomechanical performance. Mechanical testing was performed by 3-point bending of the femora. We measured femoral diaphysis cross-sectional anatomy from photographs of the fracture surfaces. We used beam equations to calculate material level mechanical properties. We performed a principal component (PC) analysis of normalized whole bone phenotypes (17 input traits). We measured distances separating mandibular landmarks from calibrated digital photographs and performed linkage analysis. Experiment-wide α = 0.05 significance thresholds were established by permutation testing. Three quantitative trait loci (QTLs) identified in these studies illustrate the advantages of the comprehensive phenotyping approach. A pleiotropic QTL on chromosome 4 affected multiple whole bone phenotypes with LOD scores as large as 17.5, encompassing size, cross-sectional ellipticity, stiffness, yield and failure load, and bone mineral density. This locus was linked to 3 of the PCs but unlinked to any of the tissue level phenotypes. From this pattern, we infer that the QTL operates by modulating the proliferative response to mechanical loading. On this basis, we successfully predicted that this locus also affects the length of a specific region of the mandible. A pleiotropic locus on chromosome 10 with LOD scores displays opposite effects on failure load and toughness with LOD scores of 4.5 and 5.5, respectively, so that the allele that increases failure load decreases toughness. A chromosome 19 QTL for PC2 with an LOD score of 4.8 was not detected with either the whole bone or tissue level phenotypes. We conclude that first, comprehensive, system-oriented phenotyping provides much information that could not be obtained by focusing on bone mineral density alone. Second, mechanical performance includes inherent trade-offs between strength and brittleness. Third, considering the aggregate phenotypic data allows prediction of novel QTLs.

Blood pressure, artery size, and artery compliance parallel bone size and strength in mice with differing ece1 expression.

The recombinant congenic mouse strains HcB-8 and HcB-23 differ in femoral shape, size, and strength, with HcB-8 femora being more gracile, more cylindrical, weaker, and having higher Youngs modulus. In previous work, we mapped a robust, pleiotropic quantitative trait locus for these bone traits. Ece1, encoding endothelin converting enzyme 1, is a positional candidate gene for this locus, and was less expressed in HcB-8 bone. We hypothesized that the same genetic factors would impose analogous developmental trajectories on arteries to those in bones. Cardiovascular hemodynamics and biomechanics of carotids were measured in adult HcB-8 and HcB-23 mice. Biological differences in heart and arteries were examined at mRNA and protein levels. As in bone, Ece1 expression was higher in HcB-23 heart and arteries (p < 0.05), and its expression was correlated with that of the endothelin B type receptor target Nos3, encoding endothelial nitric oxide synthase. HcB-8 mice had higher ambulatory blood pressure (p < 0.005) than HcB-23 mice. Ex vivo, at identical pressures, HcB-8 carotid arteries had smaller diameters and lower compliance (p < 0.05), but the same elastic modulus compared to HcB-23 carotid arteries. HcB-8 hearts were heavier than HcB-23 hearts (p < 0.01). HcB-8 has both small, stiff bones and small, stiff arteries, lower expression of Ece1 and Nos3, associated in each case with less favorable function. These findings suggest that endothelin signaling could serve as a nexus for the convergence of skeletal and vascular modeling, providing a potential mechanism for the epidemiologic association between skeletal fragility and atherosclerosis.

Congenic Strains Confirm the Pleiotropic Effect of Chromosome 4 QTL on Mouse Femoral Geometry and Biomechanical Performance

A pleiotropic quantitative trait locus (QTL) for bone geometry and mechanical performance in mice was mapped to distal chromosome 4 via an intercross of recombinant congenic mice HcB-8 and HcB-23. To study the QTL in isolation, we have generated C3H.B10-(rs6355453-rs13478087) (C.B.4.3) and C3H.B10-(rs6369860-D4Mit170) (C.B.4.2) congenic strains that harbor ~20 Mb and ~3 Mb, respectively, of chromosome 4 overlapping segments from C57BL/10ScSnA (B10) within the locus on a C3H/DiSnA (C3H) background. Using 3-point bend testing and standard beam equations, we phenotyped these mice for femoral mid-diaphyseal geometry and biomechanical performance. We analyzed the results via 2-way ANOVA, using sex and genotype as factors. In the C.B.4.3 strain, we found that homozygous B10/B10 male mice had smaller cross sectional area (CSA) and reduced total displacement than homozygous C3H/C3H mice. Sex by genotype interaction was also observed for maximum load and stiffness for C3H/C3H and B10/B10 mice, respectively. In C.B.4.2 strain, we found that homozygous B10/B10 mice had lower total displacement, post-yield displacement (PYD), stiffness, yield load and maximum load than mice harboring C3H allele. Sex by genotype interaction was observed in B10/B10 mice for perimeter, outer minor axis (OMA) and CSA. There were no significant differences in tissue level mechanical performance, which suggest that the QTL acts primarily on circumferential bone size. These data confirm the prior QTL mapping data and support other work demonstrating the importance of chromosome 4 QTL on bone modeling and bone responses to mechanical loading.

Abstract PR06: CSF1 signaling is a potential therapeutic target for glioma

Current therapies for high-grade gliomas only modestly extend survival. Given that intrinsic characteristics of glioma cancer stem cells (gCSCs) make them hard to effectively target with current therapies, cells in the tumor microenvironment such as microglia/macrophages are being investigated as therapy targets. We previously identified a microglial/macrophage growth factor, Macrophage colony stimulating factor ( Csf1 ), as a candidate glioma oncogene in a mouse somatic mutagenesis screen. CSF1 overexpression, CSF1 receptor (CSF1R) overexpression, and phosphorylated CSF1R have also been detected in human gliomas. We are using genetic and pharmacological strategies to investigate the role of CSF1 signaling in gliomagenesis in immunocompetent autochthonous mouse models to examine the therapeutic utility of targeting the CSF1R signaling axis. To determine the relevant CSF1R ligand(s) in human gliomas, we performed semi-quantitative RT-PCR on patient-derived gCSCs to examine expression of splice variants encoding membrane bound or secreted CSF1 as well as the additional CSF1R ligand IL34 . We found that gCSCs primarily express the mRNA splice variant encoding secreted CSF1 , but a splice variant encoding a membrane bound form was also detected. Most gCSCs lines did not express detectable levels of IL34 mRNA. We therefore developed a tissue-specific secreted CSF1 overexpressing transgenic model to study the effect of modulating CSF1 levels in the central nervous system. Since CSF1 is a growth factor for microglia, we previously studied the effects of increased CSF1 levels on microglial phenotypes and found that CSF1 overexpression increased microglial numbers and promoted microglial proliferation in vivo , but did not inherently polarize microglia toward a M2-like phenotype. Moreover, CSF1 signaling is required for survival of adult microglia in vivo , since inhibition of CSF1 signaling by the small molecule inhibitor PLX3397 induced microglial apoptosis. We now show that CSF1 overexpression accelerates gliomagenesis in a genetic model of spontaneous gliomagenesis driven by activated Ras. Both high- and low-grade gliomas form in mice with activated Ras, but CSF1 overexpression causes a dramatic increase in the percentage of tumors that are high-grade. Additionally, gliomas do not form in mice expressing activated Ras that are also CSF1-deficient. Therefore our data in this in vivo model indicate that CSF1 signaling plays a fundamental role in glioma development. Additional studies are underway to determine the impact of CSF1 on microglial and glioma phenotypes, and to explore how to best target CSF1 signaling for glioma therapy. Citation Format: Ishani De, Megan D. Steffen, Emily Sokn, Clayton Patros, Suzanne Litscher, Paul A. Clark, John S. Kuo, Fausto J. Rodriguez, Lara S. Collier. CSF1 signaling is a potential therapeutic target for glioma. [abstract]. In: Proceedings of the AACR Special Conference: Advances in Brain Cancer Research; May 27-30, 2015; Washington, DC. Philadelphia (PA): AACR; Cancer Res 2015;75(23 Suppl):Abstract nr PR06.