Sven Y. Vetter

Predictors of a persistent dislocation after reduction of syndesmotic injuries detected with intraoperative three-dimensional imaging.

Background: In about 25% of cases, reduction of acute unstable syndesmotic injuries and stabilization with syndesmotic screws leads to an inadequate reduction. Conventional fluoroscopy does not provide reliable information about the reduction outcome. However, use of intraoperative 3D imaging can be more accurate. The purpose of this study was to identify predictors of inadequate reduction so that the need for intra- or postoperative 3D imaging could be assessed. Our hypothesis was that complex injuries of the syndesmosis present a higher risk of malreduction than simpler ankle fractures. Methods: From August 2001 to February 2011, 251 unstable syndesmotic injuries were treated from a total of 2286 ankle fractures. In 61 of these cases, malreduction of the fibula into the fibular notch was detected by intraoperative 3D imaging. The influence of all possible concomitant and combination injuries of the ankle joint, surgeon’s experience, and potential implant-related effects was analyzed. Results: Thirty-seven Weber C fractures (60.7%), 13 Maisonneuve fractures (21.3%), 10 Weber B fractures (16.4%), and 1 syndesmotic injury without fracture (1.6%) were included. In 14 cases (23%) there was involvement of the posterior malleolus, in 10 cases of the medial malleolus (16.4%), and in 12 cases both (19.7%). The Weber C fractures included 10 bimalleolar fractures with involvement of the posterior malleolus. In neither this combination nor in any other possible injury configuration was it possible to identify a statistically significant correlation with malreduction of the fibula into the fibular notch. The surgeon’s experience or an implant-related effect had no detectable influence either. Conclusion: Based on the factors studied, it is not possible to conclude whether a patient has an increased risk of malreduction. Therefore we still recommend verifying all reduction outcomes by intraoperative 3D imaging or postoperative computed tomography. Level of Evidence: Level III, retrospective comparative study.

Postoperative Torsionsdifferenz nach unaufgebohrter antegrader Marknagelosteosynthese des Femurs: eine retrospektive 5-Jahres-Analyse

BACKGROUND Minimally invasive treatment of diaphyseal femur fractures (DFF) with closed reduction and intramedullary nailing is a well established procedure. However, a femoral malrotation after intramedullary nailing is considered to be a substantial problem. Studies have described femoral malrotation (FMR) in 17-35 % after this procedure. Computed tomography (CT) of both femora is accepted as an objective, reproducible measurement method to determine a postoperative femoral malrotation. An anatomic reposition of the centreline of the femur remains of high importance since a malrotation > 15° can lead to a significant limitation of the range of motion (ROM) and to clinical symptomatic constraints. PATIENTS/MATERIAL AND METHODS Between July 2007 and December 2011 patients with unilateral DFF were treated with closed reduction and intramedullary nailing. Exclusion criteria were defined as bilateral or prior treatment for femoral fractures, open epihyseal plate or pregnancy. In all cases a postoperative CT scan of the femora was conducted to analyse a femoral malrotation. The indication for a correction was posed in cases of a malrotation > 15°. The data were not randomised and evaluated retrospectively. RESULTS AND CONCLUSION In total 94 patients with unilateral DFF were included. 21 female and 73 male with an average age of 33.15 ± 14.04 years (range 14-94). In the postoperative CT scan an average FMR of 11.58 ± 9.41° (range 0-44°) was determined. In 15 cases (15.95 %), 10 male (13.7 %) and 5 female (23.81 %) a FMR > 15° (average: 23.66 ± 5.74°) was noticed. A subsequent surgery with a correction in average of 17.53 ± 6.83° was performed. After the correction the malrotation averaged 6.07 ± 5.61°. The results support the existing data that the treatment of DFF with closed reduction and intramedullary nailing may lead to a significant femoral malrotation despite a precise intraoperative monitoring. The data demonstrate that nearly 15 % of all patients appear after closed reduction and intramedullary nailing with a femoral malrotation greater than 15°. A routinely utilised postoperative CT scan provides additional information to discover an occult malrotation. CONCLUSION In spite of diligent attendance to the femoral torsion intraoperatively in DFF a significant femoral malrotation may result after closed reduction and intramedullary nailing. To prevent a limitation of ROM and clinical constraints a routinely performed postoperative CT scan with a adequate surgical correction is recommended.

Cystic pseudotumours in both upper ankle joints in gouty arthritis

This case demonstrates a yet unreported clinical entity of bilateral tophaceous cystic lesions of the tibiotalar joints of an 37-year-old white male who presents with moderate painful swelling in both upper ankle joints for 2 years. Radiodiagnostic studies show cystic lesions in both upper ankle joints and the right talus considering neoplastic processes in the differential diagnosis. The incisional biopsy reveals chalk-like material of the intraosseous lesions which was pathognomonic for tophaceous gout. Antihyperuricemic medication led to a stagnation of growth of the lesions without a sign of osseous remodeling. However, due to limitation of discomfort, personal preferences and a lack of surgical options conservative treatment was maintained.

Management of syndesmotic injuries: What is the evidence?

Ankle fractures are accompanied by a syndesmotic injury in about 10% of operatively treated ankle fractures. Usually, the total rupture of the syndesmotic ligaments with an external rotation force is associated with a Weber type B or C fracture or a Maisonneuve fracture. The clinical assessment should consist of a comprehensive history including mechanism of injury followed by a specific physical examination. Radiographs, and if in doubt magnetic resonance imaging, are needed to ascertain the syndesmotic injury. In the case of operative treatment the method of fixation, the height and number of screws and the need for hardware removal are still under discussion. Furthermore, intraoperative assessment of the accuracy of reduction of the fibula in the incisura using fluoroscopy is difficult. A possible solution might be the assessment with intraoperative three-dimensional imaging. The aim of this article is to provide a current concepts review of the clinical presentation, diagnosis and treatment of syndesmotic injuries.

Intra-operative adjustment of standard planes in C-arm CT image data.

PurposeWith the help of an intra-operative mobile C-arm CT, medical interventions can be verified and corrected, avoiding the need for a post-operative CT and a second intervention. An exact adjustment of standard plane positions is necessary for the best possible assessment of the anatomical regions of interest but the mobility of the C-arm causes the need for a time-consuming manual adjustment. In this article, we present an automatic plane adjustment at the example of calcaneal fractures.MethodsWe developed two feature detection methods (2D and pseudo-3D) based on SURF key points and also transferred the SURF approach to 3D. Combined with an atlas-based registration, our algorithm adjusts the standard planes of the calcaneal C-arm images automatically. The robustness of the algorithms is evaluated using a clinical data set. Additionally, we tested the algorithm’s performance for two registration approaches, two resolutions of C-arm images and two methods for metal artifact reduction.ResultsFor the feature extraction, the novel 3D-SURF approach performs best. As expected, a higher resolution (

A Portable Intra-Operative Framework Applied to Distal Radius Fracture Surgery

512^3

[The challenge of auditing by medical health insurance inspectors: development of individual case inspections according to 275ff SGB V].

5123 voxel) leads also to more robust feature points and is therefore slightly better than the