T. Brecht

Quantum Back-Action of an Individual Variable-Strength Measurement

Tracking Quantum Evolution The actual process of measuring a quantum system has an effect on the result making the outcome unpredictable. Using a superconducting qubit placed in a microwave cavity, Hatridge et al. (p. 178) found that a series of partial measurements on a quantum system left the system in a pure state. Looking at the record of the actual measurements allowed the final state of a superconducting-based quantum system to be determined accurately. Such control is crucial for achieving full feedback control of a general quantum system. The evolution of a quantum system can be tracked via a series of partial measurements that leave the system in a pure state. Measuring a quantum system can randomly perturb its state. The strength and nature of this back-action depend on the quantity that is measured. In a partial measurement performed by an ideal apparatus, quantum physics predicts that the system remains in a pure state whose evolution can be tracked perfectly from the measurement record. We demonstrated this property using a superconducting qubit dispersively coupled to a cavity traversed by a microwave signal. The back-action on the qubit state of a single measurement of both signal quadratures was observed and shown to produce a stochastic operation whose action is determined by the measurement result. This accurate monitoring of a qubit state is an essential prerequisite for measurement-based feedback control of quantum systems.

Reaching 10 ms single photon lifetimes for superconducting aluminum cavities

Three-dimensional microwave cavities have recently been combined with superconducting qubits in the circuit quantum electrodynamics architecture. These cavities should have less sensitivity to dielectric and conductor losses at surfaces and interfaces, which currently limit the performance of planar resonators. We expect that significantly (>103) higher quality factors and longer lifetimes should be achievable for 3D structures. Motivated by this principle, we have reached internal quality factors greater than 0.5 × 109 and intrinsic lifetimes of 0.01 s for multiple aluminum superconducting cavity resonators at single photon energies and millikelvin temperatures. These improvements could enable long lived quantum memories with submicrosecond access times when strongly coupled to superconducting qubits.

Surface participation and dielectric loss in superconducting qubits

We study the energy relaxation times (T1) of superconducting transmon qubits in 3D cavities as a function of dielectric participation ratios of material surfaces. This surface participation ratio, representing the fraction of electric field energy stored in a dissipative surface layer, is computed by a two-step finite-element simulation and experimentally varied by qubit geometry. With a clean electromagnetic environment and suppressed non-equilibrium quasiparticle density, we find an approximately proportional relation between the transmon relaxation rates and surface participation ratios. These results suggest dielectric dissipation arising from material interfaces is the major limiting factor for the T1 of transmons in 3D circuit quantum electrodynamics architecture. Our analysis also supports the notion of spatial discreteness of surface dielectric dissipation.

Measurement and control of quasiparticle dynamics in a superconducting qubit

Superconducting circuits have attracted growing interest in recent years as a promising candidate for fault-tolerant quantum information processing. Extensive efforts have always been taken to completely shield these circuits from external magnetic fields to protect the integrity of the superconductivity. Here we show vortices can improve the performance of superconducting qubits by reducing the lifetimes of detrimental single-electron-like excitations known as quasiparticles. Using a contactless injection technique with unprecedented dynamic range, we quantitatively distinguish between recombination and trapping mechanisms in controlling the dynamics of residual quasiparticle, and show quantized changes in quasiparticle trapping rate because of individual vortices. These results highlight the prominent role of quasiparticle trapping in future development of superconducting qubits, and provide a powerful characterization tool along the way.

Non-Poissonian Quantum Jumps of a Fluxonium Qubit due to Quasiparticle Excitations

As the energy relaxation time of superconducting qubits steadily improves, nonequilibrium quasiparticle excitations above the superconducting gap emerge as an increasingly relevant limit for qubit coherence. We measure fluctuations in the number of quasiparticle excitations by continuously monitoring the spontaneous quantum jumps between the states of a fluxonium qubit, in conditions where relaxation is dominated by quasiparticle loss. Resolution on the scale of a single quasiparticle is obtained by performing quantum nondemolition projective measurements within a time interval much shorter than T₁, using a quantum-limited amplifier (Josephson parametric converter). The quantum jump statistics switches between the expected Poisson distribution and a non-Poissonian one, indicating large relative fluctuations in the quasiparticle population, on time scales varying from seconds to hours. This dynamics can be modified controllably by injecting quasiparticles or by seeding quasiparticle-trapping vortices by cooling down in a magnetic field.

Demonstration of superconducting micromachined cavities

Superconducting enclosures will be key components of scalable quantum computing devices based on circuit quantum electrodynamics. Within a densely integrated device, they can protect qubits from noise and serve as quantum memory units. Whether constructed by machining bulk pieces of metal or microfabricating wafers, 3D enclosures are typically assembled from two or more parts. The resulting seams potentially dissipate crossing currents and limit performance. In this letter, we present measured quality factors of superconducting cavity resonators of several materials, dimensions, and seam locations. We observe that superconducting indium can be a low-loss RF conductor and form low-loss seams. Leveraging this, we create a superconducting micromachined resonator with indium that has a quality factor of two million, despite a greatly reduced mode volume. Inter-layer coupling to this type of resonator is achieved by an aperture located under a planar transmission line. The described techniques demonstrate a proof-of-principle for multilayer microwave integrated quantum circuits for scalable quantum computing.

Suspending superconducting qubits by silicon micromachining

We present a method for relieving aluminum 3D transmon qubits from a silicon substrate using micromachining. Our technique is a high yield, one-step deep reactive ion etch that requires no additional fabrication processes, and results in the suspension of the junction area and edges of the aluminum film. The drastic change in the device geometry affects both the dielectric and flux noise environment experienced by the qubit. In particular, the participation ratios of various dielectric interfaces are significantly modified, and suspended qubits exhibited longer

Erratum: Micromachined Integrated Quantum Circuit Containing a Superconducting Qubit [Phys. Rev. Applied 7 , 044018 (2017)]

T_1

Multilayer microwave integrated quantum circuits for scalable quantum computing

s than non-suspended ones. We also find that suspension increases the flux noise experienced by tunable SQUID-based qubits.

Micromachined Integrated Quantum Circuit Containing a Superconducting Qubit

We present a device demonstrating a lithographically patterned transmon integrated with a micromachined cavity resonator. Our two-cavity, one-qubit device is a multilayer microwave integrated quantum circuit (MMIQC), comprising a basic unit capable of performing circuit-QED (cQED) operations. We describe the qubit-cavity coupling mechanism of a specialized geometry using an electric field picture and a circuit model, and finally obtain specific system parameters using simulations. Fabrication of the MMIQC includes lithography, etching, and metallic bonding of silicon wafers. Superconducting wafer bonding is a critical capability that is demonstrated by a micromachined storage cavity lifetime