T. Kaltenbacher

Exploring the WEP with a pulsed cold beam of antihydrogen

The AEGIS experiment, currently being set up at the Antiproton Decelerator at CERN, has the objective of studying the free fall of antimatter in the Earth?s gravitational field by means of a pulsed cold atomic beam of antihydrogen atoms. Both duration of free fall and vertical displacement of the horizontally emitted atoms will be measured, allowing a first test of the WEP with antimatter.

AEgIS experiment commissioning at CERN

The AEgIS Experiment is an international collaboration based at CERN whose aim is to perform the first direct measurement of the gravitational acceleration g of antihydrogen in the gravitational field of the Earth. Cold antihydrogen will be produced with a pulsed charge exchange reaction in a cylindrical Penning trap where antiprotons will be cooled to 100mK. The cold antihydrogen will be produced in an excited Rydberg state and subsequently formed into a beam. The deflection of the antihydrogen beam will be measured by using Moire deflectometer gratings. After being approved in late 2008, AEgIS started taking data in a commissioning phase early 2012. This report presents an overview of the AEgIS experiment, describes its current status and shows the first measurements on antiproton catching and cooling in the 5 T Penning catching trap. We will also present details on the techniques needed for the 100mK antihydrogen production, such as pulsed positronium production and its excitation with lasers.

Detection of low energy antiproton annihilations in a segmented silicon detector

The goal of the AEIS experiment at the Antiproton Decelerator (AD) at CERN, is to measure directly the Earths gravitational acceleration on antimatter by measuring the free fall of a pulsed, cold antihydrogen beam. The final position of the falling antihydrogen will be detected by a position sensitive detector. This detector will consist of an active silicon part, where the annihilations take place, followed by an emulsion part. Together, they allow to achieve 1% precision on the measurement of with about 600 reconstructed and time tagged annihilations. We present here the prospects for the development of the AEIS silicon position sentive detector and the results from the first beam tests on a monolithic silicon pixel sensor, along with a comparison to Monte Carlo simulations.

Measuring

experiments main goal is to measure the local gravitational acceleration of antihydrogen and thus perform a direct test of the weak equivalence principle with antimatter. In the first phase of the experiment the aim is to measure with 1% relative precision. This paper presents the antihydrogen production method and a description of some components of the experiment, which are necessary for the gravity measurement. Current status of the experimental apparatus is presented and recent commissioning results with antiprotons are outlined. In conclusion we discuss the short-term goals of the collaboration that will pave the way for the first gravity measurement in the near future.

\bar{g}

The principal aim of the AEgIS experiment at CERN is to measure the acceleration of antihydrogen due to Earths gravitational field. This would be a test of the Weak Equivalence Principle, which states that all bodies fall with the same acceleration independently of their mass and composition. The effect of Earths gravitational field on antimatter will be determined by measuring the deflection of the path of the antihydrogen from a straight line. The position of the antihydrogen will be found by detecting its annihilation on the surface of a silicon detector. The gravitational measurement in AEgIS will be performed with a gravity module, which includes the silicon detector, an emulsion detector and a scintillating fibre time-of-flight detector. As the experiment attempts to determine the gravitational acceleration with a precision of 1%, a position resolution better than 10 μm is required. Here we present the results of a study of antiproton annihilations in a 3D silicon pixel sensor and compare the results with a previous study using a monolithic active pixel sensor. This work is part of a larger study on different silicon sensor technologies needed for the development of a silicon position detector for the AEgIS experiment. The 3D detector together with its readout electronics have been originally designed for the ATLAS detector at the LHC. The direct annihilation of low energy antiprotons ( ~ 100 keV) takes place in the first few μm of the silicon sensor and we show that the charged products of the annihilation can be detected with the same sensor. The present study also aims to understand the signature of an antiproton annihilation event in segmented silicon detectors and compares it with a GEANT4 simulation model. These results will be used to determine the geometrical and process parameters to be adopted by the silicon annihilation detector to be installed in AEgIS.

with

Production of antihydrogen by using the charge exchange reaction, as proposed by AEgIS (Antimatter Experiment: gravity, Interferometry, Spectroscopy), requires the formation of a dense cloud of positronium atoms excited to Rydberg states. In this work, the recent advances in AEgIS towards this result are described. Namely, the manipulation of positrons to produce bunches containing more than 108 particles and the laser excitation of positronium to Rydberg states, using n=3 as intermediate level, are presented.

{\rm AE\bar{g}IS}

The motivation of the AEgIS experiment is to test the universality of free fall with antimatter. The goal is to reach a relative uncertainty of 1% for the measurement of the earths gravitational acceleration

, progress and perspectives

\bar{g}

Comparison of Planar and 3D Silicon Pixel Sensors Used for Detection of Low Energy Antiprotons

on an antihydrogen beam. High vertex position resolution is required for a position detector. An emulsion based detector can measure the annihilation vertex of antihydrogen atoms with a resolution of 1-2 μm, which if realized in the actual experiment will enable a 1% measurement of

submitter : Positron Manipulation and Positronium Laser Excitation in AEgIS

\bar{g}