T. Kocourek

d0 Ferromagnetic Interface between Nonmagnetic Perovskites

We use computational and experimental methods to study d(0) ferromagnetism at a charge-imbalanced interface between two perovskites. In SrTiO(3)/KTaO(3) superlattice calculations, the charge imbalance introduces holes in the SrTiO(3) layer, inducing a d(0) ferromagnetic half-metallic 2D hole gas at the interface oxygen 2p orbitals. The charge imbalance overrides doping by vacancies at realistic concentrations. Varying the constituent materials shows ferromagnetism to be a general property of hole-type d(0) perovskite interfaces. Atomically sharp epitaxial d(0) SrTiO(3)/KTaO(3), SrTiO(3)/KNbO(3), and SrTiO(3)/NaNbO(3) interfaces are found to exhibit ferromagnetic hysteresis at room temperature. We suggest that the behavior is due to the high density of states and exchange coupling at the oxygen t(1g) band in comparison with the more studied d band t(2g) symmetry electron gas.

Thin-Layer Hydroxyapatite Deposition on a Nanofiber Surface Stimulates Mesenchymal Stem Cell Proliferation and Their Differentiation into Osteoblasts

Pulsed laser deposition was proved as a suitable method for hydroxyapatite (HA) coating of coaxial poly-ɛ-caprolactone/polyvinylalcohol (PCL/PVA) nanofibers. The fibrous morphology of PCL/PVA nanofibers was preserved, if the nanofiber scaffold was coated with thin layers of HA (200 nm and 400 nm). Increasing thickness of HA, however, resulted in a gradual loss of fibrous character. In addition, biomechanical properties were improved after HA deposition on PCL/PVA nanofibers as the value of Youngs moduli of elasticity significantly increased. Clearly, thin-layer hydroxyapatite deposition on a nanofiber surface stimulated mesenchymal stem cell viability and their differentiation into osteoblasts. The optimal depth of HA was 800 nm.

Chromium-doped DLC for implants prepared by laser-magnetron deposition.

Diamond-like carbon (DLC) thin films are frequently used for coating of implants. The problem of DLC layers lies in bad layer adhesion to metal implants. Chromium is used as a dopant for improvement of adhesion of DLC films. DLC and Cr-DLC layers were deposited on silicon, Ti6Al4V and CoCrMo substrates by a hybrid technology using combination of pulsed laser deposition (PLD) and magnetron sputtering. The topology of layers was studied using SEM, AFM and mechanical profilometer. Carbon and chromium content and concentration of trivalent and toxic hexavalent chromium bonds were determined by XPS and WDS. It follows from the scratch tests that Cr doping improved adhesion of DLC layers. Ethylene glycol, diiodomethane and deionized water were used to measure the contact angles. The surface free energy (SFE) was calculated. The antibacterial properties were studied using Pseudomonas aeruginosa and Staphylococcus aureus bacteria. The influence of SFE, hydrophobicity and surface roughness on antibacterial ability of doped layers is discussed.

Strain-controlled optical absorption in epitaxial ferroelectric BaTiO3 films

A lattice strain of 0.3%–1.3% is achieved in epitaxial tetragonal BaTiO3 films grown on (001)-oriented SrTiO3 single-crystal substrates. Our experimental studies of absorption spectra in the range of 0.74–9.0 eV demonstrate that epitaxy produces significant changes in the optical properties of the films compared with those of a reference polydomain BaTiO3 crystal: the absorption edge and the peak at 5 eV strongly blue-shift by 0.2–0.4 eV, the magnitude of the peak at 5 eV drops, and certain spectral features disappear, whereas the absorption peak at 8.5 eV remains unchanged. The observed behavior is attributed to ferroelectric polarization, which is enhanced by epitaxial strain in the films. Our results indicate that epitaxially induced variations of ferroelectric polarization may be used to tailor the optical properties of thin films for photonic and optoelectronic applications.

Bonding and bio-properties of hybrid laser/magnetron Cr-enriched DLC layers.

Chromium-enriched diamond-like carbon (DLC) layers were prepared by a hybrid technology using a combination of pulsed laser deposition (PLD) and magnetron sputtering. XRD revealed no chromium peaks, indicating that the layers are mostly amorphous. Carbon (sp(2) and sp(3) bonds) and chromium bonds were determined by XPS from C 1s, O 1s, and Cr 2p photoelectron peaks. Depending on the deposition conditions, the concentration of Cr in DLC layers moved from zero to 10 at.% for as-received sample surfaces, and to about 31 at.% after mild sputter-cleaning by argon ion cluster beam. It should be noted that the most stable Cr(3+) bonding state is in Cr2O3 and Cr(OH)3, and that there is the toxic Cr(6+) state in CrO3. The surface content of hexavalent chromium in the Cr 2p3/2 spectra is rather low, but discernible. The population density of Saos-2 cells was the highest in samples containing higher concentrations of chromium 7.7 and 10 at.%. This means that higher concentrations of chromium supported the cell adhesion and proliferation. In addition, as revealed by a LIVE/DEAD viability/cytotoxicity kit, the cells on all Cr-containing samples maintained high viability (96 to 99%) on days 1 and 3 after seeding. However, this seemingly positive cell behavior could be associated with the risk of dedifferentiation and oncogenic transformation of cells.

Optical properties of laser-prepared Er- and Er,Yb-doped LiNbO3 waveguiding layers

Doped LiNbO3 films were prepared from Er- and Er,Yb-doped monocrystalline targets using laser ablation. SiO2/Si was used as a substrate. Polycrystalline films were synthesized at substrate temperatures of 650–800 ° C. The influence of the deposition conditions on the film crystallinity, surface morphology, dopant concentration, optical properties (using the m-line technique and spectroscopic ellipsometry), and luminescence was studied. The films were luminescent at 1530 nm and were waveguiding.

Biomedical properties of laser prepared silver-doped hydroxyapatite

Thin films of hydroxyapatite (HA) and silver-doped HA were synthesized using KrF excimer laser deposition. Material was ablated from one target composed from silver and HA segments. Layers properties as silver content, structure, color, FTIR spectra and antibacterial properties (Gram-positive Bacillus subtilis) were measured. Silver concentration in HA layers of 0.06, 0.3, 1.2, 4.4, 8.3, and 13.7 at % was detected. The antibacterial efficacy changed with silver dopation from 71.0 to 99.9%. The focus is on investigation of minimum Ag concentration needed to reach a high antibacterial efficacy.

Properties of thin N-type Yb0.14Co4Sb12 and P-type Ce0.09Fe0.67Co3.33Sb12 skutterudite layers prepared by laser ablation

The properties of thin thermoelectric layers (about 60 nm in thickness) prepared by pulsed laser deposition are presented. Hot pressed targets were made from “middle” temperature range thermoelectric bulk materials with the potential high figure of merit ZT. P-type and N-type layers were prepared from Yb0.19Co4Sb12 and Ce0.1Fe0.7Co3.3Sb12 targets, respectively. The thin films were deposited on quartz glass substrates using KrF excimer laser. The individual layers were prepared by applying different laser beam energy densities (2 or 3 J cm−2) at several substrate temperatures (200, 250, or 300 °C). Crystallinity and composition of the layers were examined by x-ray diffraction and wavelength dispersive analysis, respectively. Homogeneity of Yb across a surface of the Yb filled film was explored by secondary ion mass spectrometry. The thermoelectric properties, the Seebeck coefficient, the electrical resistivity, and the power factor, for the best prepared P and N layer are presented in the temperature range...

Biological properties of titanium implants covered with hydroxyapatite and zirconia layers by pulsed laser : In vitro study

The biological and physical properties of dental implants coated by the sandwich technique with a thin layer of hydroxyapatite and an interlayer of zirconia were evaluated. The implant samples were covered by pulsed laser deposition. The aim of our study is to evaluate the cytotoxicity and the surface characteristics of the titanium targets modified with zirconia and hydroxyapatite. The titanium substrates were analyzed physically by x-ray diffraction and scanning electron microscopy. We used a direct test of cytotoxicity to compare the prepared samples with other reference materials. No changes in the morphology or the proliferation rate of the cells used were found in the presence of the modified titanium targets. The adhesion, proliferation, and fibronectin expressions of human fibroblasts were also evaluated on the surface of the modified titanium targets. The results show that the modified titanium samples are at least as attractive as the tissue grade polystyrene in promoting fibroblasts’ adhesion a...

PLD prepared bioactive BaTiO3 films on TiNb implants

BaTiO3 (BTO) layers were deposited by pulsed laser deposition (PLD) on TiNb, Pt/TiNb, Si (100), and fused silica substrates using various deposition conditions. Polycrystalline BTO with sizes of crystallites in the range from 90nm to 160nm was obtained at elevated substrate temperatures of (600°C-700°C). With increasing deposition temperature above 700°C the formation of unwanted rutile phase prevented the growth of perovskite ferroelectric BTO. Concurrently, with decreasing substrate temperature below 500°C, amorphous films were formed. Post-deposition annealing of the amorphous deposits allowed obtaining perovskite BTO. Using a very thin Pt interlayer between the BTO films and TiNb substrate enabled high-temperature growth of preferentially oriented BTO. Raman spectroscopy and electrical characterization indicated polar ferroelectric behaviour of the BTO films.