T. Levi

Improving the method of low‐temperature anisotropy of magnetic susceptibility (LT‐AMS) measurements in air

This study examines the limitations of the method of low-temperature anisotropy of magnetic susceptibility (LT-AMS) measurements in air and presents technical improvements that significantly reduce the instrumental drift and measurement errors. We analyzed the temperature profile of porous chalk core after cooling in liquid nitrogen and found that the average temperature of the sample during the LT-AMS measurement in air is higher than 77K and close to 92K. This analysis indicates that the susceptibility of the paramagnetic minerals are amplified by a factor !3.2 relative to that of room temperature AMS (RT-AMS). In addition, it was found that liquid nitrogen was absorbed in the samples during immersing and contributed diamagnetic component of !29 3 10 SI to the total mean susceptibility. We showed that silicone sheet placed around and at the bottom of the measuring coil is an effective thermal protection, preventing instrument drift by the cold sample. In this way, the measuring errors of LT-AMS reduced to the level of RT-AMS, allowing accurate comparison with standard AMS measurements. We examined the applicability of the LTAMS measurements on chalk samples that consist <5% (weight) of paramagnetic minerals and showed that it helps to efficiently enhance the paramagnetic fabric. The present study offers a practical approach, which can be applied to various types of rocks to better delineate the paramagnetic phase using conventional equipment.

Characterizing seismites with anisotropy of magnetic susceptibility

This study was supported by grants from the Israeli Government under Geological Survey of Israel DS project 40706, and the Israel Science Foundation (ISF grants 868/17). We are indebted to Vladimir Lyakhovsky for helpful discussions during the course of this study, and to Mike Jackson, Bjarne Almqvist, and Jason Patton for providing constructive and very helpful reviews

Folding during soft-sediment deformation

Abstract The detailed analysis of folding in rocks was in part pioneered by John Ramsay, and resulted in a range of techniques and criteria to define folds. Although folding of unlithified or ‘soft’ sediments is typically assumed to produce similar geometries to those in ‘hard rocks’, there has to date been little detailed analysis of such folds. The aim of this paper is therefore to investigate folds developed during soft-sediment deformation (SSD) by applying techniques established for the analysis of tectonic folds during hard-rock deformation (HRD). We use the Late Pleistocene Lisan Formation exposed around the Dead Sea as our case study, as the laminated lake sediments record intricacies of fold detail generated during seismically triggered slumping of mass transport deposits (MTDs) towards the depocentre of the basin. While it is frequently assumed that folds created during SSD are chaotic and form disharmonic structures, we provide analyses that show harmonic fold trains may form during slumping, although larger upright folds cannot be traced for significant distances and are more typically disharmonic. Our analysis also reveals a range of fold styles, with more competent detrital-rich layers displaying buckles (Class 1B), as well as upright Class 1A folds marked by thickened limbs. Class 1A buckle folds are generally considered to be created by flattening that overprints folds with an original Class 1B geometry. As thickened fold limbs are truncated by overlying erosive surfaces, the vertical flattening is considered to have occurred during the slump event. Different fold shapes may partially reflect variable flattening, depending on the original orientation of upright or recumbent folds, together with continued downslope-directed simple-shear deformation that modifies the fold geometry. Analysis of fold wavelength, amplitude and bed thickness allows us to plot strain contour maps, and indicates that beds defining slump folds display viscosity contrasts in the range of 50–250, which are similar to values estimated from folds created during HRD in metamorphic rocks. A range of refold patterns, similar to those established by John Ramsay in metamorphic rocks, are observed within slumps, and are truncated by the overlying sediments, indicating that they formed during a single progressive slump event rather than distinct ‘episodes’ of superimposed deformation. This study confirms that techniques developed for the analysis of folds created during HRD are equally applicable to those formed during SSD, and that resulting folds are generally indistinguishable from one another. Extreme caution should therefore be exercised when interpreting the origin of folds in the rock record where the palaeogeographical and tectonic contexts become increasingly uncertain, thereby leading to potential misidentification of folds created during SSD.