Taichi Furukawa

Multicolor Cathodoluminescence Microscopy for Biological Imaging with Nanophosphors

We report the first demonstration of a multicolor high-spatial-resolution imaging technique for observation of biological cells using cathodoluminescence from nanophosphors. Three kinds of rare-earth-doped nanophosphors were injected into J744A.1 macrophages, and the spatial distribution of nanophosphors was visualized by using a scanning electron microscope cathodoluminescence (SEM-CL) system. The spectral bandwidth of the phosphors was narrow enough to distinguish the types of the phosphors. CL images of the nanophosphors on Si substrates were obtained with high resolution comparable to that of SEM images. These nanophosphors will be candidates to image more than two kinds of biological molecules at high resolution.

Correlative near-infrared light and cathodoluminescence microscopy using Y2O3:Ln, Yb (Ln = Tm, Er) nanophosphors for multiscale, multicolour bioimaging

This paper presents a new correlative bioimaging technique using Y2O3:Tm, Yb and Y2O3:Er, Yb nanophosphors (NPs) as imaging probes that emit luminescence excited by both near-infrared (NIR) light and an electron beam. Under 980 nm NIR light irradiation, the Y2O3:Tm, Yb and Y2O3:Er, Yb NPs emitted NIR luminescence (NIRL) around 810 nm and 1530 nm, respectively, and cathodoluminescence at 455 nm and 660 nm under excitation of accelerated electrons, respectively. Multimodalities of the NPs were confirmed in correlative NIRL/CL imaging and their locations were visualized at the same observation area in both NIRL and CL images. Using CL microscopy, the NPs were visualized at the single-particle level and with multicolour. Multiscale NIRL/CL bioimaging was demonstrated through in vivo and in vitro NIRL deep-tissue observations, cellular NIRL imaging, and high-spatial resolution CL imaging of the NPs inside cells. The location of a cell sheet transplanted onto the back muscle fascia of a hairy rat was visualized through NIRL imaging of the Y2O3:Er, Yb NPs. Accurate positions of cells through the thickness (1.5 mm) of a tissue phantom were detected by NIRL from the Y2O3:Tm, Yb NPs. Further, locations of the two types of NPs inside cells were observed using CL microscopy.

Y2O3:Tm,Yb nanophosphors for correlative upconversion luminescence and cathodoluminescence imaging.

We present a phosphor nanoparticle that shows both upconversion luminescence (UCL) and cathodoluminescence (CL). With this particle, low-autofluorescence, deep-tissue and wide-field fluorescence imaging can be achieved with nanometer-order high-spatial-resolution imaging. We synthesized Y2O3:Tm,Yb nanophosphors that emit visible and near-infrared UCL under 980 nm irradiation and blue CL via electron beam excitation. The phosphors were applied to fluorescent imaging of HeLa cells. The photostability of the phosphors was superior to that of a conventional organic dye. We show that after uptake by HeLa cells, the particles can be imaged with SEM and CL contrast in a cellular section. This indicates that correlative UCL and CL imaging of biological samples could be realized.

High-resolution microscopy for biological specimens via cathodoluminescence of Eu- and Zn-doped Y 2 O 3 nanophosphors

High-resolution microscopy for biological specimens was performed using cathodoluminescence (CL) of Y(2)O(3):Eu, Zn nanophosphors, which have high CL intensity due to the incorporation of Zn. The intensity of Y(2)O(3):Eu nanophosphors at low acceleration voltage (3 kV) was increased by adding Zn. The CL intensity was high enough for imaging even with a phosphor size as small as about 30 nm. The results show the possibility of using CL microscopy for biological specimens at single-protein-scale resolution. CL imaging of HeLa cells containing laser-ablated Y(2)O(3):Eu, Zn nanophosphors achieved a spatial resolution of a few tens of nanometers. Y(2)O(3):Eu, Zn nanophosphors in HeLa cells were also imaged with 254 nm ultraviolet light excitation. The results suggest that correlative microscopy using CL, secondary electrons and fluorescence imaging could enable multi-scale investigation of molecular localization from the nanoscale to the microscale.

Synthesis of Y 2 O 3 nanophosphors by homogeneous precipitation method using excessive urea for cathodoluminescence and upconversion luminescence bioimaging

Yttrium oxide-based nanophosphors that emit both upconversion luminescence (UPL) and cathodoluminescence (CL) were synthesized by a precipitation method using excessive urea. Precursors of Y2O3 nanophosphors were synthesized with size control to less than 50 nm and a chemical yield greater than 90%. Concentrations of rare-earth co-dopants in nanophosphors were controlled with optimal molar ratios. Co-dopants Tm, Yb/Er, Yb enabled NPs to emit UPL at wavelengths around 810/660 nm and CL at wavelengths around 450/660 nm via excitation with 980 nm NIR light and an electron beam. Synthesized NPs were imaged by NIR and CL microscopy.

Fabrication of bright and thin Zn 2 SiO 4 luminescent film for electron beam excitation-assisted optical microscope

We fabricated a bright and thin Zn₂SiO₄ luminescent film to serve as a nanometric light source for high-spatial-resolution optical microscopy based on electron beam excitation. The Zn₂SiO₄ luminescent thin film was fabricated by annealing a ZnO film on a Si₃N₄ substrate at 1000 °C in N₂. The annealed film emitted bright cathodoluminescence compared with the as-deposited film. The film is promising for nano-imaging with electron beam excitation-assisted optical microscopy. We evaluated the spatial resolution of a microscope developed using this Zn₂SiO₄ luminescent thin film. This is the first report of the investigation and application of ZnO/Si₃N₄ annealed at a high temperature (1000 °C). The fabricated Zn₂SiO₄ film is expected to enable high-frame-rate dynamic observation with ultra-high resolution using our electron beam excitation-assisted optical microscopy.

Rare-earth-doped nanophosphors for multicolor cathodoluminescence nanobioimaging using scanning transmission electron microscopy

Abstract. We describe rare-earth-doped nanophosphors (RE-NPs) for biological imaging using cathodoluminescence (CL) microscopy based on scanning transmission electron microscopy (STEM). We report the first demonstration of multicolor CL nanobioimaging using STEM with nanophosphors. The CL spectra of the synthesized nanophosphors (Y2O3:Eu, Y2O3:Tb) were sufficiently narrow to be distinguished. From CL images of RE-NPs on an elastic carbon-coated copper grid, the spatial resolution was beyond the diffraction limit of light. Y2O3:Tb and Y2O3:Eu RE-NPs showed a remarkable resistance against electron beam exposure even at high acceleration voltage (80 kV) and retained a CL intensity of more than 97% compared with the initial intensity for 1 min. In biological CL imaging with STEM, heavy-metal-stained cell sections containing the RE-NPs were prepared, and both the CL images of RE-NPs and cellular structures, such as mitochondria, were clearly observed from STEM images with high contrast. The cellular CL imaging using RE-NPs also had high spatial resolution even though heavy-metal-stained cells are normally regarded as highly scattering media. Moreover, since the RE-NPs exhibit photoluminescence (PL) excited by UV light, they are useful for multimodal correlative imaging using CL and PL.

Multispectral Emissions of Lanthanide-Doped Gadolinium Oxide Nanophosphors for Cathodoluminescence and Near-Infrared Upconversion/Downconversion Imaging

Comprehensive imaging of a biological individual can be achieved by utilizing the variation in spatial resolution, the scale of cathodoluminescence (CL), and near-infrared (NIR), as favored by imaging probe Gd2O3 co-doped lanthanide nanophosphors (NPPs). A series of Gd2O3:Ln3+/Yb3+ (Ln3+: Tm3+, Ho3+, Er3+) NPPs with multispectral emission are prepared by the sol-gel method. The NPPs show a wide range of emissions spanning from the visible to the NIR region under 980 nm excitation. The dependence of the upconverting (UC)/downconverting (DC) emission intensity on the dopant ratio is investigated. The optimum ratios of dopants obtained for emissions in the NIR regions at 810 nm, 1200 nm, and 1530 nm are applied to produce nanoparticles by the homogeneous precipitation (HP) method. The nanoparticles produced from the HP method are used to investigate the dual NIR and CL imaging modalities. The results indicate the possibility of using Gd2O3 co-doped Ln3+/Yb3+ (Ln3+: Tm3+, Ho3+, Er3+) in correlation with NIR and CL imaging. The use of Gd2O3 promises an extension of the object dimension to the whole-body level by employing magnetic resonance imaging (MRI).

Dynamic nano-imaging of label-free living cells using electron beam excitation-assisted optical microscope

Optical microscopes are effective tools for cellular function analysis because biological cells can be observed non-destructively and non-invasively in the living state in either water or atmosphere condition. Label-free optical imaging technique such as phase-contrast microscopy has been analysed many cellular functions, and it is essential technology for bioscience field. However, the diffraction limit of light makes it is difficult to image nano-structures in a label-free living cell, for example the endoplasmic reticulum, the Golgi body and the localization of proteins. Here we demonstrate the dynamic imaging of a label-free cell with high spatial resolution by using an electron beam excitation-assisted optical (EXA) microscope. We observed the dynamic movement of the nucleus and nano-scale granules in living cells with better than 100 nm spatial resolution and a signal-to-noise ratio (SNR) around 10. Our results contribute to the development of cellular function analysis and open up new bioscience applications.

3D Shape Reconstruction of 3D Printed Transparent Microscopic Objects from Multiple Photographic Images Using Ultraviolet Illumination

We propose and demonstrate a simple, low-cost, three-dimensional (3D) shape acquisition method for transparent 3D printed microscopic objects. Our method uses ultraviolet (UV) illumination to obtain high-contrast silhouette images of transparent 3D printed polymer objects. Multiple silhouette images taken from different viewpoints make it possible to reconstruct the 3D shape of this transparent object. A 3D shape acquisition system consisting of a UV light-emitting diode, charge-coupled device camera and a rotation stage was constructed and used to successfully reconstruct the 3D shape of a transparent bunny model produced using micro-stereolithography. In addition, 3D printed pillar array models, with different diameters on the order of several hundred micrometers, were reconstructed. This method will be a promising tool for the 3D shape reconstruction of transparent 3D objects on both the micro- and macro-scale by changing the imaging lens.