Takenori Ishida

Inhibition of Quorum Sensing in Pseudomonas aeruginosa by N-Acyl Cyclopentylamides

ABSTRACT N-Octanoyl cyclopentylamide (C8-CPA) was found to moderately inhibit quorum sensing in Pseudomonas aeruginosa PAO1. To obtain more powerful inhibitors, a series of structural analogs of C8-CPA were synthesized and examined for their ability to inhibit quorum sensing in P. aeruginosa PAO1. The lasB-lacZ and rhlA-lacZ reporter assays revealed that the chain length and the ring structure were critical for C8-CPA analogs to inhibit quorum sensing. N-Decanoyl cyclopentylamide (C10-CPA) was found to be the strongest inhibitor, and its concentrations required for half-maximal inhibition for lasB-lacZ and rhlA-lacZ expression were 80 and 90 μM, respectively. C10-CPA also inhibited production of virulence factors, including elastase, pyocyanin, and rhamnolipid, and biofilm formation without affecting growth of P. aeruginosa PAO1. C10-CPA inhibited induction of both lasI-lacZ by N-(3-oxododecanoyl)-l-homoserine lactone (PAI1) and rhlA-lacZ by N-butanoyl-l-homoserine lactone (PAI2) in the lasI rhlI mutant of P. aeruginosa PAO1, indicating that C10-CPA interferes with the las and rhl quorum-sensing systems via inhibiting interaction between their response regulators (LasR and RhlR) and autoinducers.

A New Subfamily of Polyphosphate Kinase 2 (Class III PPK2) Catalyzes both Nucleoside Monophosphate Phosphorylation and Nucleoside Diphosphate Phosphorylation

ABSTRACT Inorganic polyphosphate (polyP) is a linear polymer of tens to hundreds of phosphate (Pi) residues linked by “high-energy” phosphoanhydride bonds as in ATP. PolyP kinases, responsible for the synthesis and utilization of polyP, are divided into two families (PPK1 and PPK2) due to differences in amino acid sequence and kinetic properties. PPK2 catalyzes preferentially polyP-driven nucleotide phosphorylation (utilization of polyP), which is important for the survival of microbial cells under conditions of stress or pathogenesis. Phylogenetic analysis suggested that the PPK2 family could be divided into three subfamilies (classes I, II, and III). Class I and II PPK2s catalyze nucleoside diphosphate and nucleoside monophosphate phosphorylation, respectively. Here, we demonstrated that class III PPK2 catalyzes both nucleoside monophosphate and nucleoside diphosphate phosphorylation, thereby enabling us to synthesize ATP from AMP by a single enzyme. Moreover, class III PPK2 showed broad substrate specificity over purine and pyrimidine bases. This is the first demonstration that class III PPK2 possesses both class I and II activities.

The silica-binding Si-tag functions as an affinity tag even under denaturing conditions

We recently reported a one-step affinity purification method using a silica-binding protein, designated Si-tag, as a fusion partner and silica particles as the specific adsorbents (Ikeda et al., Protein Expr. Purif. 71 [2010] 91-95) [13]. In this study, we demonstrate that the Si-tag also binds to the silica surface even under denaturing conditions, thereby facilitating affinity purification of recombinant proteins from inclusion bodies. A fusion protein of the Si-tag and a biotin acceptor peptide (AviTag), which was expressed as inclusion bodies in Escherichia coli, was used as a model protein. To simplify our purification method, we disrupted recombinant E. coli cells by sonication in the presence of 8M urea with concomitant solubilization of the inclusion bodies. The fusion protein was recovered with a purity of 90 ± 3% and yield of 92 ± 6% from the cleared cell lysate. We also discuss the binding mechanism of the Si-tag to a silica surface in the presence of high concentrations of denaturant. We propose that the intrinsic disorder of the polycationic Si-tag polypeptide plays an important role in its binding to the silica surface under denaturing conditions.

Isolation and characterization of a soluble and thermostable phosphite dehydrogenase from Ralstonia sp. strain 4506

Phosphite dehydrogenase (PtxD), which catalyzes the nearly irreversible oxidation of phosphite to phosphate with the concomitant reduction of NAD(+) to NADH, has great potential for NADH regeneration in industrial biocatalysts. Here, we isolated a soil bacterium, Ralstonia sp. strain 4506, that grew at 45°C on a minimal medium containing phosphite as the sole source of phosphorus. A recombinant PtxD of Ralstonia sp. (PtxD(R4506)) appeared in the soluble fraction in Escherichia coli. The purified PtxD(R4506) showed 6.7-fold greater catalytic efficiency (V(max)/K(m)) than the first characterized PtxD of Pseudomonas stutzeri (PtxD(PS)). Moreover, the purified PtxD(R4506) showed maximum activity at 50°C, and its half-life of thermal inactivation at 45°C was 80.5h, which is approximately 3,450-fold greater than that of PtxD(PS). Therefore, we concluded that PtxD(R4506), which shows high catalytic efficiency, solubility, and thermostability, would be useful for NADH regeneration applications.

Selective detection of airborne asbestos fibers using protein-based fluorescent probes

Fluorescence microscopy (FM) is one of the most important analytical tools in modern life sciences, sufficiently sensitive to allow observation of single molecules. Here we describe the first application of the FM technique for the detection of inorganic environmental pollutants-airborne asbestos fibers that can cause asbestosis, mesothelioma, and lung cancer. In order to assess FM capabilities for detecting and counting asbestos fibers, we screened E. coli lysate for proteins that bind to amphibole asbestos. In combination with the previously discovered E. coli protein DksA (Kuroda et al., Biotechnol. Bioeng. 2008, 99, 285-289) that can specifically bind to chrysotile, the newly identified GatZ protein was used for selective and highly sensitive detection of two different asbestos types. Our novel FM-based method overcomes a number of limitations of the commonly used phase-contrast microscopy (PCM) method, offering a convenient alternative to PCM for airborne asbestos monitoring.

Application of a phosphite dehydrogenase gene as a novel dominant selection marker for yeasts

The use of antibiotic resistance markers in the commercial application of genetically modified microorganisms is limited due to restrictions on the release of antibiotics and their resistance genes to the environment. To avoid contamination by other microorganisms, the development of a dominant selection marker with low environmental risks is still needed. Here we demonstrated a new selection system for Schizosaccharomyces pombe and Saccharomyces cerevisiae using a bacterial phosphite dehydrogenase gene (ptxD). A Sz. pombe transformant carrying ptxD under a strong promoter or on a multicopy plasmid grew on a minimal medium containing phosphite (Pt) as a sole source of phosphorus. To adapt this system to S. cerevisiae strains, codon optimization of ptxD was necessary. The codon-optimized ptxD system appeared effective in not only laboratorial but also industrial S. cerevisiae strains that are diploid or polyploid. Since Pt is a safe and inexpensive chemical, ptxD could be used as a novel dominant selection marker applicable on an industrial scale.

The Effects of Cyclodextrins on Autoinducer Activities of Quorum Sensing in Pseudomonas aeruginosa

Inclusion complex formation between cyclodextrin and autoinducer of gram negative bacteria in aqueous solution was investigated by 1D 1H-NMR and ROESY spectra. An inhibitioneffect was observed on autoinducer activities of quorum sensing in Pseudomonas aeruginosa by adding cyclodextrins to the bacterial culture medium.

A Novel Biocontainment Strategy Makes Bacterial Growth and Survival Dependent on Phosphite

There is a growing demand to develop biocontainment strategies that prevent unintended proliferation of genetically modified organisms in the open environment. We found that the hypophosphite (H3PO2, HPt) transporter HtxBCDE from Pseudomonas stutzeri WM88 was also capable of transporting phosphite (H3PO3, Pt) but not phosphate (H3PO4, Pi), suggesting the potential for engineering a Pt/HPt-dependent bacterial strain as a biocontainment strategy. We disrupted all Pi and organic Pi transporters in an Escherichia coli strain expressing HtxABCDE and a Pt dehydrogenase, leaving Pt/HPt uptake and oxidation as the only means to obtain Pi. Challenge on non-permissive growth medium revealed that no escape mutants appeared for at least 21 days with a detection limit of 1.94 × 10−13 per colony forming unit. This represents, to the best of our knowledge, the lowest escape frequency among reported strategies. Since Pt/HPt are ecologically rare and not available in amounts sufficient for the growth of the Pt/HPt-dependent bacteria, this strategy offers a reliable and practical method for biocontainment.

The C-Terminal Zwitterionic Sequence of CotB1 Is Essential for Biosilicification of the Bacillus cereus Spore Coat

UNLABELLED Silica is deposited in and around the spore coat layer of Bacillus cereus, and enhances the spores acid resistance. Several peptides and proteins, including diatom silaffin and silacidin peptides, are involved in eukaryotic silica biomineralization (biosilicification). Homologous sequence search revealed a silacidin-like sequence in the C-terminal region of CotB1, a spore coat protein of B. cereus. The negatively charged silacidin-like sequence is followed by a positively charged arginine-rich sequence of 14 amino acids, which is remarkably similar to the silaffins. These sequences impart a zwitterionic character to the C terminus of CotB1. Interestingly, the cotB1 gene appears to form a bicistronic operon with its paralog, cotB2, the product of which, however, lacks the C-terminal zwitterionic sequence. A ΔcotB1B2 mutant strain grew as fast and formed spores at the same rate as wild-type bacteria but did not show biosilicification. Complementation analysis showed that CotB1, but neither CotB2 nor C-terminally truncated mutants of CotB1, could restore the biosilicification activity in the ΔcotB1B2 mutant, suggesting that the C-terminal zwitterionic sequence of CotB1 is essential for the process. We found that the kinetics of CotB1 expression, as well as its localization, correlated well with the time course of biosilicification and the location of the deposited silica. To our knowledge, this is the first report of a protein directly involved in prokaryotic biosilicification. IMPORTANCE Biosilicification is the process by which organisms incorporate soluble silicate in the form of insoluble silica. Although the mechanisms underlying eukaryotic biosilicification have been intensively investigated, prokaryotic biosilicification was not studied until recently. We previously demonstrated that biosilicification occurs in Bacillus cereus and its close relatives, and that silica is deposited in and around a spore coat layer as a protective coating against acid. The present study reveals that a B. cereus spore coat protein, CotB1, which carried a C-terminal zwitterionic sequence, is essential for biosilicification. Our results provide the first insight into mechanisms required for biosilicification in prokaryotes.

Development of an automated asbestos counting software based on fluorescence microscopy

An emerging alternative to the commonly used analytical methods for asbestos analysis is fluorescence microscopy (FM), which relies on highly specific asbestos-binding probes to distinguish asbestos from interfering non-asbestos fibers. However, all types of microscopic asbestos analysis require laborious examination of large number of fields of view and are prone to subjective errors and large variability between asbestos counts by different analysts and laboratories. A possible solution to these problems is automated counting of asbestos fibers by image analysis software, which would lower the cost and increase the reliability of asbestos testing. This study seeks to develop a fiber recognition and counting software for FM-based asbestos analysis. We discuss the main features of the developed software and the results of its testing. Software testing showed good correlation between automated and manual counts for the samples with medium and high fiber concentrations. At low fiber concentrations, the automated counts were less accurate, leading us to implement correction mode for automated counts. While the full automation of asbestos analysis would require further improvements in accuracy of fiber identification, the developed software could already assist professional asbestos analysts and record detailed fiber dimensions for the use in epidemiological research.