Takumi Ono

Laser-Doppler vibrating tube densimeter for measurements at high temperatures and pressures

A laser-Doppler vibrometer was used to measure the vibration of a vibrating tube densimeter for measuring P-V-T data at high temperatures and pressures. The apparatus developed allowed the control of the residence time of the sample so that decomposition at high temperatures could be minimized. A function generator and piezoelectric crystal was used to excite the U-shaped tube in one of its normal modes of vibration. Densities of methanol-water mixtures are reported for at 673 K and 40 MPa with an uncertainty of 0.009 g/cm3.

A flow cell for measuring X-ray Compton scattering of liquid at temperatures up to 623 K and pressures up to 20 MPa

A flow-type cell was developed for measuring Compton scattering spectra of heat-sensitive aqueous solution. Compton scattering spectra of water and ethanol were measured in the region from ambient conditions to 623 K and 20 MPa. Compton profiles derived from measurement with the flow-type cell were comparable with those in the literature. Results obtained from the flow-type cell showed that delocalization of electronic charge density of water and ethanol at high temperatures occurred. Delocalization of the electronic charge density of ethanol was greater than that of water at high temperature, which is consistent with the prior works that use proton NMR chemical shifts to describe hydrogen bonding.

Microwave oscillator using piezoelectric thin-film resonator aiming for ultraminiaturization of atomic clock

We developed a microwave oscillator and a micro electromechanical systems-based rubidium cell for the miniaturization of atomic clocks. A thin-film bulk acoustic resonator (FBAR) having a resonant frequency of the fundamental mode in the 3.5 GHz band was employed instead of a crystal resonator. It delivers a clock transition frequency of Rb atoms of 3.417 GHz without the need for a complicated frequency multiplication using a phase-locked loop. This topology considerably reduces the system scale and power consumption. For downsizing the atomic clock system toward the chip level as well as mass production, a microfabricated gas cell containing Rb and N2 gases was also developed. These microcomponents were incorporated into an atomic clock test bench, resulting in a clock operation with a short-term frequency instability of 2.1 × 10-11 at 1 s. To the best of our knowledge, this is the first report of a coherent population trapping clock operation using an FBAR-based microwave oscillator as well as a microfabricated gas cell.

Hydrogen bond lifetimes in supercritical methanol–water mixtures via MD simulation

ABSTRACT Dynamical features of hydrogen bonds in methanol–water mixtures have been analysed in terms of lifetime in the wide range of conditions, including supercritical states, using a molecular dynamics simulation with flexible potential models. Hydrogen bond characteristics in methanol–water mixtures were investigated by considering the combination of molecular species and donor–acceptor of hydrogen-bonded molecules. The hydrogen bond lifetimes mainly depend on temperature, and those in supercritical condition were about 1/10th of that at ambient condition. Focusing on the composition dependence of the hydrogen bond lifetime, the unique behaviour of that resulting from hydration structure was observed. Moreover, the molecular combination, which showed the largest hydrogen bond lifetime, was different for ambient and high temperature and high pressure conditions. The relationship between hydrogen bond lifetime and molar volume was also calculated to discuss the hydrogen bond lifetime in terms of the collision frequency of molecules and the intermolecular distance.