Talita Cuenca Pina Moreira Ramos

Evaluating Antioxidant Eugenol on Oxidation Stability of Biodiesel Synthesized from Used Frying Oil

Due the environmental appeal, the demand of new processes and inputs has been increasing considerably in the last decade. Biodiesel is a biodegradable fuel obtained from vegetable oils or animal fats, including those discarded after use. The methyl and ethyl transesterification routes for biodiesel production were tested by using residual frying oil as raw material through the homogeneous basic catalyst, such as sodium hydroxide. In present work, it was evaluated the efficiency of the eugenol on the oxidation stability of the methyl and ethyl biodiesels synthesized from residual frying oil. The chromatographic analysis determined that the conversion of the yield to the methyl and ethylic esters (biodiesel) was 90.6 % and 87.3 %(m/m) respectively. For both biodiesel samples a rise of the eugenol concentration added resulted in an increase of the induction period (oxidation stability parameter evaluated by Rancimat method), with a consequent reduction of the acid number. Taking these results into account, it can be concluded that the samples obtained after eugenol addition can be used as biodiesel. DOI: http://dx.doi.org/10.17807/orbital.v10i1.1030

The Effect of Iron (III) Co-Insertion in Magnesium-Aluminum Hydrotalcites Obtained by Precipitation Method at pH 11

Hydrotalcite are anionic clay material presenting LDH arrangement and high porosity and specific areas, which make it a good adsorbent for pollutant species in water. Besides that, that material type can be used as catalyst or catalyst support in several industrial processes. The most common compositions is based on metallic mix hydroxide with high content of magnesium, but their adsorptive properties arise from aluminum replacement in layer structure. The present work presents the synthesis of carbonated magnesium-aluminum hydrotalcite through the precipitation method in order to investigate the co-insertion of iron (III) in aluminum site. It was found the iron (III) co-inserted samples obtained at 100 and 200 oC for 4 hours present no substantial harming in relation to the common magnesium-aluminum composition. All of the samples presented high porosity and specific area, becoming an alternative anionic adsorptive.