Tamim A. Darwish

Comprehensive study of carbon dioxide adsorption in the metal–organic frameworks M2(dobdc) (M = Mg, Mn, Fe, Co, Ni, Cu, Zn)

Analysis of the CO2 adsorption properties of a well-known series of metal–organic frameworks M2(dobdc) (dobdc4− = 2,5-dioxido-1,4-benzenedicarboxylate; M = Mg, Mn, Fe, Co, Ni, Cu, and Zn) is carried out in tandem with in situ structural studies to identify the host–guest interactions that lead to significant differences in isosteric heats of CO2 adsorption. Neutron and X-ray powder diffraction and single crystal X-ray diffraction experiments are used to unveil the site-specific binding properties of CO2 within many of these materials while systematically varying both the amount of CO2 and the temperature. Unlike previous studies, we show that CO2 adsorbed at the metal cations exhibits intramolecular angles with minimal deviations from 180°, a finding that indicates a strongly electrostatic and physisorptive interaction with the framework surface and sheds more light on the ongoing discussion regarding whether CO2 adsorbs in a linear or nonlinear geometry. This has important implications for proposals that have been made to utilize these materials for the activation and chemical conversion of CO2. For the weaker CO2 adsorbents, significant elongation of the metal–O(CO2) distances are observed and diffraction experiments additionally reveal that secondary CO2 adsorption sites, while likely stabilized by the population of the primary adsorption sites, significantly contribute to adsorption behavior at ambient temperature. Density functional theory calculations including van der Waals dispersion quantitatively corroborate and rationalize observations regarding intramolecular CO2 angles and trends in relative geometric properties and heats of adsorption in the M2(dobdc)–CO2 adducts.

CO2 Triggering and Controlling Orthogonally Multiresponsive Photochromic Systems

We report a new generic method of reversibly controlling the photochromism of spiropyrans. It was found that the photochromic effect of spiropyrans can be reversibly switched on and off by addition and removal of carbon dioxide (CO(2)) to spiropyran in alcohol solutions containing an amidine (i.e., DBU) that acts as a CO(2) sensitizer. Spiropyrans are not photochromic in the presence of DBU but photochromic when CO(2) is subsequently added to the solution. The CO(2) is readily removed by inert gas bubbling, thus allowing facile activation and deactivation of the photochromic effect. Carbon dioxide, without the presence of the sensitizing amidine, had no effect on photochromism of the spiropyrans. Other photochromic dyes classes such as spirooxazines and chromenes are not affected by this CO(2)/DBU stimulus. As a result, orthogonal activation of mixtures of spirooxazines and spiropyrans was achieved to provide four color states (clear, yellow, green, and blue) by varying the combinations of the stimuli of UV, visible light, CO(2), and CO(2) depleted. This finding now permits the many applications using spiropyrans to be CO(2) responsive.

Multi-Responsive Photo- and Chemo-Electrical Single-Molecule Switches

Incorporating molecular switches as the active components in nanoscale electrical devices represents a current challenge in molecular electronics. It demands key requirements that need to be simultaneously addressed including fast responses to external stimuli and stable attachment of the molecules to the electrodes while mimicking the operation of conventional electronic components. Here, we report a single-molecule switching device that responds electrically to optical and chemical stimuli. A light pointer or a chemical signal can rapidly and reversibly induce the isomerization of bifunctional spiropyran derivatives in the bulk reservoir and, consequently, switch the electrical conductivity of the single-molecule device between a low and a high level. The spiropyran derivatives employed are chemically functionalized such that they can respond in fast but practical time scales. The unique multistimuli response and the synthetic versatility to control the switching schemes of this single-molecule device suggest spiropyran derivatives as key candidates for molecular circuitry.

Interpenetration as a Mechanism for Negative Thermal Expansion in the Metal–Organic Framework Cu3(btb)2 (MOF-14)†

Metal-organic framework materials (MOFs) have recently been shown in some cases to exhibit strong negative thermal expansion (NTE) behavior, while framework interpenetration has been found to reduce NTE in many materials. Using powder and single-crystal diffraction methods we investigate the thermal expansion behavior of interpenetrated Cu3(btb)2 (MOF-14) and find that it exhibits an anomalously large NTE effect. Temperature-dependent structural analysis shows that, contrary to other interpenetrated materials, in MOF-14 the large positive thermal expansion of weak interactions that hold the interpenetrating networks together results in a low-energy contractive distortion of the overall framework structure, demonstrating a new mechanism for NTE.

Organic Reference Materials for Hydrogen, Carbon, and Nitrogen Stable Isotope-Ratio Measurements: Caffeines, n-Alkanes, Fatty Acid Methyl Esters, Glycines, l-Valines, Polyethylenes, and Oils

An international project developed, quality-tested, and determined isotope-δ values of 19 new organic reference materials (RMs) for hydrogen, carbon, and nitrogen stable isotope-ratio measurements, in addition to analyzing pre-existing RMs NBS 22 (oil), IAEA-CH-7 (polyethylene foil), and IAEA-600 (caffeine). These new RMs enable users to normalize measurements of samples to isotope-δ scales. The RMs span a range of δ(2)H(VSMOW-SLAP) values from -210.8 to +397.0 mUr or ‰, for δ(13)C(VPDB-LSVEC) from -40.81 to +0.49 mUr and for δ(15)N(Air) from -5.21 to +61.53 mUr. Many of the new RMs are amenable to gas and liquid chromatography. The RMs include triads of isotopically contrasting caffeines, C16 n-alkanes, n-C20-fatty acid methyl esters (FAMEs), glycines, and l-valines, together with polyethylene powder and string, one n-C17-FAME, a vacuum oil (NBS 22a) to replace NBS 22 oil, and a (2)H-enriched vacuum oil. A total of 11 laboratories from 7 countries used multiple analytical approaches and instrumentation for 2-point isotopic normalization against international primary measurement standards. The use of reference waters in silver tubes allowed direct normalization of δ(2)H values of organic materials against isotopic reference waters following the principle of identical treatment. Bayesian statistical analysis yielded the mean values reported here. New RMs are numbered from USGS61 through USGS78, in addition to NBS 22a. Because of exchangeable hydrogen, amino acid RMs currently are recommended only for carbon- and nitrogen-isotope measurements. Some amino acids contain (13)C and carbon-bound organic (2)H-enrichments at different molecular sites to provide RMs for potential site-specific isotopic analysis in future studies.

pH-responsive micelles based on caprylic acid.

Free fatty acids play a vital role as fuel for cells and in lipid metabolism. During lipid digestion in the gastrointestinal tract, triglycerides are hydrolyzed, resulting in free fatty acid and monoglyceride amphiphilic products. These components, together with bile salts, are responsible for the transport of lipids and poorly water-soluble nutrients and xenobiotics from the intestine into the circulatory system of the body. In this study, we show that the self-assembly of digestion products from medium-chain triglycerides (tricaprylin) in combination with bile salt and phospholipid is highly pH-responsive. Individual building blocks of caprylic acid within the mixed colloidal structures are mapped using a combination of small-angle X-ray and neutron scattering combined with both solvent contrast variation and selective deuteration. Modeling of the scattering data shows transitions in the size and shape of the micelles in combination with a transfer of the caprylic acid from the core of the micelles to the shell or into the bulk water upon increasing pH. The results help to understand the process of lipid digestion with a focus on colloidal structure formation and transformation for the delivery of triglyceride lipids and other hydrophobic functional molecules.

Localization of trehalose in partially hydrated DOPC bilayers: insights into cryoprotective mechanisms

Trehalose, a natural disaccharide with bioprotective properties, is widely recognized for its ability to preserve biological membranes during freezing and dehydration events. Despite debate over the molecular mechanisms by which this is achieved, and that different mechanisms imply quite different distributions of trehalose molecules with respect to the bilayer, there are no direct experimental data describing the location of trehalose within lipid bilayer membrane systems during dehydration. Here, we use neutron membrane diffraction to conclusively show that the trehalose distribution in a dioleoylphosphatidylcholine (DOPC) system follows a Gaussian profile centred in the water layer between bilayers. The absence of any preference for localizing near the lipid headgroups of the bilayers indicates that the bioprotective effects of trehalose at physiologically relevant concentrations are the result of non-specific mechanisms that do not rely on direct interactions with the lipid headgroups.

Disposition and crystallization of saturated fatty acid in mixed micelles of relevance to lipid digestion

During lipolysis of triglyceride by lipase, monoglyceride and fatty acids are produced which combine with gastrointestinal fluids to form self-assembled structures. These solubilize hydrophobic food components to promote their absorption. The aim of this study was a detailed understanding of structure formation from triglyceride digestion products with saturated short-, medium- and long chain fatty acids. Complementary characterization methods have been applied comprising small angle X-ray and neutron scattering – the latter involving the contrast matching technique using fully deuterated fatty acids – polarized and depolarized dynamic light scattering and cryogenic-transmission electron microscopy. Shape, size and solubilization capacity of the self-assembled structures was dependent on composition and lipid chain length. Crystallization of fatty acid was observed when the solubility limit in the mixed bile salt micelles was exceeded; however, increasing pH and temperature increased the fatty acid solubility. The results provide insight into structure formation and crystallization of incorporated lipolysis products; this is important for a detailed understanding of food structure and nutrition, as well as the rational design of lipid based drug delivery systems.

Structure and Lateral Interaction in Mixed Monolayers of Dioctadecyldimethylammonium Chloride (DOAC) and Stearyl Alcohol

π-A isotherms, atomic force microscopy (AFM), and sum frequency generation (SFG) vibrational spectroscopy are employed to investigate the molecular structure and lateral interactions in mixed monolayers of dioctadecyldimethylammonium chloride (DOAC) and stearyl alcohol (SA) at air/water and air/solid interfaces. To avoid possible interference between the two molecules in the SFG spectroscopic measurements, perprotonated DOAC and perdeuterated SA (dSA) were used. The thermodynamic analyses for the π-A isotherms show that DOAC is miscible with dSA. SFG observations reveal that DOAC molecules become conformationally ordered as dSA molecules are introduced into the monolayer. AFM observations demonstrate coexistence of DOAC-rich and dSA-rich domains in the mixed monolayer with ratios different from their initial composition in the subphase. The present study suggests that DOAC molecules in the mixed monolayer are condensed by mixing with dSA in which the repulsive interactions between positively charged head groups of the DOAC molecules are largely reduced along with an increase of van der Waals interactions with dSA.

Synthesis of deuterated [D32]oleic acid and its phospholipid derivative [D64]dioleoyl‐sn‐glycero‐3‐phosphocholine

Oleic acid and its phospholipid derivatives are fundamental to the structure and function of cellular membranes. As a result, there has been increasing interest in the availability of their deuterated forms for many nuclear magnetic resonance, infrared, mass spectroscopy and neutron scattering studies. Here, we present for the first time a straightforward, large-scale (gram quantities) synthesis of highly deuterated [D32 ]oleic acid by using multiple, yet simple and high yielding reactions. The precursors for the synthesis of [D32 ]oleic acid are [D14 ]azelaic acid and [D17 ]nonanoic acid, which were obtained by complete deuteration (>98% D) of their (1) H forms by using metal catalysed hydrothermal H/D exchange reactions. The oleic acid was produced with ca. 94% D isotopic purity and with no contamination by the trans-isomer (elaidic acid). The subsequent synthesis of [D64 ]dioleoyl-sn-glycero-3-phosphocholine from [D32 ]oleic acid is also described.